Tamaraw FX Owners

[mr.xtraordinary]

kung hindi starter, ay solenoid.
pag binaba ay makikita kung sino.

sir, madali lang bang baklasin ung starter ng fx?

at ung solenoid ba ay lilinisin lang o papalitan?

la pa kasi ako budget pang pagawa sa iba. i diy ko nalang sana.

[abongon65]

anything na alam mong gawin madali lang, kong hindi mahirap..pero kong may hilig mag kalikot analysis & logic lang yan nagagawana.

[mr.xtraordinary]

anything na alam mong gawin madali lang, kong hindi mahirap..pero kong may hilig mag kalikot analysis & logic lang yan nagagawana.

sana madala sa linis lang ng liha. hehehhe

starter relay ng motor nagawa ko ayusin, sana ganun din sa fx. heheheheheh

[dr. d]

sir, madali lang bang baklasin ung starter ng fx?

at ung solenoid ba ay lilinisin lang o papalitan?

la pa kasi ako budget pang pagawa sa iba. i diy ko nalang sana.

when my brother and i, did our first starter, it took us over an hour. mang felix the mechanic tambay sa auto parts store, does it in 5-10 minutes. he knows how, his muscles are stronger, and he does not care how dirty his hands and his clothes get. until then, we only read about it. we do care how dirty our clothes get, because our mom does. and our muscles are weak. we're doctors!

i always have my solenoid replaced. it is my belief that if it happened once, it will happen again, soon, even after a good cleaning. but solenoids aren't cheap. several hundreds to about a thousand, depending on type and model.

good luck.

[blacksaphire]

sir ano po standard or stock size ng primary and secondary jets ng carb 7k engine tamaraw fx 1.8 thanks. im using 5k carburetor now for 7k engine ano ang reccomend size ng jet

[blacksaphire]

model 98 1.8L orig two tone paint....
wala lang po share ko lang kahit old model na ng toyota......

bro 97fx owner here 1.8L.

we played with the jets already, we tried lowering the jets for low speed and high speed, best results we had is with a lowered high speed jet(90).
difference lang is medyo matipid sa malayuang biyahe, pero konti din lang, pero you will notice na me kaya pa sya ibigay sa quinta kung hindi sakal ang jet.

konti na lang yata anf Fx owners he he.

good luck sa fx...post mo pics ng fxester mo.

Pinaka maganda pa din yung stock. Its a compromise between power and efficiency. I tried testing both, kung mas malaki, medyo malakas nga hatak pero malaklak din sa gas. Pag maliit naman, medyo titipid pero humina naman hatak, ganun din, kelangan mo din pigain accelerator. Technique ko lang is hanggat maari, wag lalagpas ng 2k sa RPM. Pag nasa rekta, wag lalagpas ng 80 kph, dahil pag umabot ka na ng 90 kph, bubukas na yung secondary ng carburador at lalakas na sa gas. dahan-dahan din ng piga ng accelerator.

Stock jettings ng 5K ng Liteace ko dati:
106/155

sir ano stock jettings ng carb sa 7k engine, same lang sila sa design ng 5k carb pero mag kaiba sa plunger at jettings nila

[Jeffy07]

May PCV valve po ba 2c engine? If meron po san location. Tnx

[jvnj]

May PCV valve po ba 2c engine? If meron po san location. Tnx

If PCV, yes meron. If N/A 2C, malapit sa likod ng Valve cover, right side if your standing at the front. Bale eto yung merong 3/4 hose na naka connect sa intake manifold.

[mr.xtraordinary]

mga sir,

san po ba nilalagay ung tranmission oil or gear oil ng 2c enginge ng fx? para san po yan?


pag tumatakbo po kasi fx ko, pag mag change gear tapos aarangkada na, may kalansing o kalampag akong naririnig.

sa 2nd gear at 3rd gear ko naririnig.


ano po ba ung gear oil, tranmission oil, differential oil? ilang litro po yang mga yan?

ano ano ba ung mga oil na kailangan palitan sa fx? 1996 model po kasi ung fx na pinamana sakin. gusto ko sana icondition siya. tnx

[Jeffy07]

if pcv, yes meron. If n/a 2c, malapit sa likod ng valve cover, right side if your standing at the front. Bale eto yung merong 3/4 hose na naka connect sa intake manifold.

[attach=config]33370[/attach]

Ito po ba sir?