Tamaraw FX Owners

[chito2011]

Nalito nga ako, hehehe..

Sir pinaka maganda niyan ay ipa engine wash mo ng mabuti para matanggal lahat ng oil marks.

From there afterwards makikita mo na kung may leaks pa or wala na.

Yung pa palit ng lahat ng oil seals ay most prefered sir specially kung top overhaul, hence "OVERHAUL".

From that point after the overhaul, dapat ay wala ng tatagas na langis

Di ko lang magets yung chronological events hahaha

Sir Chito,

I tried back-reading and here's what I understand: (Nagpa-overhaul ka kasi kumakain na ng langis at may leaks, then nung ma overhaul nag overheat naman dahil may mali at may kulang pala sa cooling system, you tried installing an auxiliary fan to address the overheating and it did. After sometime, may moist of oil leak na coming somewhere the cylinder head and front of your engine. You brought your FX at Cargard and then they changed the oil seal and torque tightened the cylinder head bolts due to findings of insufficient tightening.) This is what I understand, please do correct me if im wrong or something's missing.

Based on the above, I believe that due to the frequent (3 times) overheating, either your cylinder head MIGHT have warped already or your head gasket might have been burned due to the extensive heat of overheating, which of course have caused your engine, the leaks. I hope the re-tightening has already addressed the leaks, and I do also hope that my analysis is wrong

mga bro,

the tightening of the screw was done by the mechanic from cargard to test the cylinder head gasket. he did it to prove that it was not the cylinder head gasket, but the oil seals. and I quote "o tingnan mo nasa no. ____ (he mentioned a number but I forgot) na yung torque wrench, ibig sabihin nahihigpitan ko pa, ibig sabihin hindi cylinder head gasket ang problem."

teka I post ko yung hitsura ngayon ng front ng makina ko... tingnan nyo kung may maitutulong sa pag analyze natin he he he. kuha ko to kaninang umaga lang...

[chito2011]

this was taken last Saturday (sept 14) nung pagkatapos mapalitan ng oil seals nung mechanic from cargard...

[chito2011]

dongski & jvnj: from those 2 images, kung naremedyuhan ang leak ng oil seals ng fx ko, san dapat hindi tatagas na parte dito?

yung bandang baba ng image na may mga bahid ng oil sa gilid ay tapat ng cylinder head gasket di ba?

[siopaonatoasted]

Di kaya yung oil seal yan nung mga gasket na related sa timing belt?

[chito2011]

Di kaya yung oil seal yan nung mga gasket na related sa timing belt?

ilan ba ang oil seals ng makina? eto yung location ng mga oil seals na pinalitan..

[Flipo]

Sir siopaonatoasted thanks for sharing the manual

[Dongskie]

mga bro,

teka I post ko yung hitsura ngayon ng front ng makina ko... tingnan nyo kung may maitutulong sa pag analyze natin he he he. kuha ko to kaninang umaga lang...

this was taken last Saturday (sept 14) nung pagkatapos mapalitan ng oil seals nung mechanic from cargard...

Posibleng sa front oil seal ng camshaft or oil pump nagmula yung oil leak paps.

Sana naman na engine wash man lang before or after ginawa yung engine mo, nakita ko yung sludge eh

[chito2011]

Posibleng sa front oil seal ng camshaft or oil pump nagmula yung oil leak paps.

Sana naman na engine wash man lang before or after ginawa yung engine mo, nakita ko yung sludge eh

pa engine wash ko tomorrow. sana umaraw

[dr. d]

pa engine wash ko tomorrow. sana umaraw

kung gusto mong umulan, ask me to wash my car.
it always rains after i wash my car.. even in the summer..!

[jvnj]

ilan ba ang oil seals ng makina? eto yung location ng mga oil seals na pinalitan..

Sir Chito,

Given the images above, I think napalitan naman lahat ng oil seals. As for now it is best to observe first after the engine wash. Also, I would recommend opening the timing belt cover (yung sa ibabaw lang) after a week or two para malaman kung may oil stains o wala yung timing belt area. BTW, nung binuksan ba Bro sa Cargard e malangis na yung timing belt?