Ok lang ba hindi muna ipagawa ang Stabilizer links and Suspension Arm Assembly?

[Wh1stl3r]

Agree with the guys. Both are safety issues. Kung nagtitipid, you can get quality replacement parts instead of original parts. If the control arms are still ok and only the bushings are damaged, you can have new bushings pressed.

The Japan made replacement brands are ok. And cost only a fraction of original parts.

Another thing with the arms. If you don't fix them soon they will cause your tires to wear unevenly. Mabilis yan mauubos. Gastos na naman yun.

[ice15]

Based on my personal experience... (Except for the 88-91 Lancer)

Sirang bushing/stabilizer etc will result to the following:

Kalampag
Affect vehicle stability (cornering/acceleration/braking)
Affect alignment and camber

(Yung Lancer ko bigla na lang tumirik )

If wala kang nararamdaman/nakikitang/naririnig na issue... Baka pwede pa maghintay ng 5 years.

Pero 5 years later... May pagagawa ka nanaman ulit. Paluma nang paluma yung car, palaki mg palaki ang gastos.

[StockEngine]

bro ano sasakyan mo? these two parts are not that expensive. over priced yan quote sayo. original stablinks more or less 2000, Lower arm assembly (balljoint and two bushings) more or less 10,000.

edit: mukhang pairs ata yun quote lol

[Athrunzala]

bro ano sasakyan mo? these two parts are not that expensive. over priced yan quote sayo. original stablinks more or less 2000, Lower arm assembly (balljoint and two bushings) more or less 10,000.

edit: mukhang pairs ata yun quote lol

oo pares (2) yung nakasulat, nakakapagduda ba? Dapat isa lang muna ang nasisira di ba?

(2) stabilizer links = 2,700 x 2 = 5,400
(2) Suspension Arm assembly = 10,600 x 2 = 21,200pesos

[kagalingan]

basta underchassis kung walang obvious na sira or wala ka naman nafefeel na lagutok kalampag eh wag pagawa.

Jan madami nagigign "inventor" na talyer.

Wala kasi evidensya. Pwede lang sabihin na sira ito sira yan.

Try mo kay exalta banawe n.roxas or kay goodyear servitek quezon avenue bago mag jollibee d.tuazon. Sa experience ko yan matitino magcheckup.

Basta find 5 talyer and check mo if same diagnosis.

[Athrunzala]

basta underchassis kung walang obvious na sira or wala ka naman nafefeel na lagutok kalampag eh wag pagawa.

Jan madami nagigign "inventor" na talyer.

Wala kasi evidensya. Pwede lang sabihin na sira ito sira yan.

Try mo kay exalta banawe n.roxas or kay goodyear servitek quezon avenue bago mag jollibee d.tuazon. Sa experience ko yan matitino magcheckup.

Basta find 5 talyer and check mo if same diagnosis.

Well "Worn-out" does not mean SIRA di ba?

[LOLZ]

oo pares (2) yung nakasulat, nakakapagduda ba? Dapat isa lang muna ang nasisira di ba?

(2) stabilizer links = 2,700 x 2 = 5,400
(2) Suspension Arm assembly = 10,600 x 2 = 21,200pesos

malaki pinatong nila sa stabilizer links 950 rear 1100 front(set na ng dalawa left and right) lang yan sa shopee
https://shopee.ph/Hyundai-Tucson-Kia...gaAnanEALw_wcB
https://shopee.ph/Front-Stabilizer-L...waAgDnEALw_wcB

[Athrunzala]

By the way pinacheck ko ang Wheel Alignment sa another Tire store, sabi ng mechanic ok naman at naka-Wheel Alignment pa daw ang 2 front wheels. So no need to pay for a Wheel Alignment, binigyan ko na lang ng tip.

Hindi ba kapag sira ang stabilizer links and suspension arm assembly , hindi pwedeng mag alignment ang 2 front wheels?

[Athrunzala]

malaki pinatong nila sa stabilizer links 950 rear 1100 front(set na ng dalawa left and right) lang yan sa shopee
https://shopee.ph/Hyundai-Tucson-Kia...gaAnanEALw_wcB
https://shopee.ph/Front-Stabilizer-L...waAgDnEALw_wcB

laki nga noh...