New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23
  1. Join Date
    Jul 2013
    Posts
    5,512
    #11
    since last Oct ka lang nagpalit ng pads... baka di pa gaanong lapat yung pads mo

  2. Join Date
    Sep 2019
    Posts
    107
    #12
    Thanks mga sirs sa advice

    Additional observation: Nagrefill kami ng brake fluid kahapon ng umaga nung nicheck namin kaninang umaga hindi sya nabawasan. Hindi ginamit yung car yesterday since coding.

    Dalhin ko nalang sa Speedyfix bukas para macheck na din for peace of mind. Mag update ako sa thread bukas mga sirs. Thanks! :D

  3. Join Date
    Oct 2002
    Posts
    40,085
    #13
    Quote Originally Posted by dr. d View Post
    brakepads do not normally wear that fast... unless your rotors are sandpaper-lined.
    my guess is, you're leaking brake fluid.
    hoist the car up and take a good look around the brake lines and brake mechanisms. look for something that's wet with brake fluid. don't forget the brake master.
    He said last replacement was 4.5+ years ago.


    Sent from my iPhone using Tapatalk

  4. Join Date
    Jun 2005
    Posts
    3,772
    #14
    Quote Originally Posted by shadow View Post
    He said last replacement was 4.5+ years ago.


    Sent from my iPhone using Tapatalk
    4.5 years for the brake pads. Yung fluid was about 2 months ago.

    Di naman impossible na maglast ying brake pads ng ganun katagal. Yung 2008 vios ko still had original brake pads when sold in february this year with lots of meat left even after clocking 120k+ kms.

    Sent from my MI MAX 2 using Tapatalk

  5. Join Date
    Sep 2019
    Posts
    107
    #15
    Went to Speedyfix kanina and they said na yung brake master yung may leak and need palitan.

    Although wala naman din ako napansin na kakaiba sa pagbrake, normal naman lahat. Yun leak nya super slow lang talaga. Ginamit namin sya kahapon and kaninang umaga hindi naman bumaba yung level.

    Need ko na maghanap ng brake master since wala daw sila at medyo recent pa yung car. Thanks guys!

  6. Join Date
    May 2017
    Posts
    2,099
    #16
    yup, mas usual suspect ang brake master kapag nagbabawas ng fluid kaysa sa brake pads

  7. Join Date
    Jan 2008
    Posts
    4,726
    #17
    Quote Originally Posted by tensazangetsu View Post
    Went to Speedyfix kanina and they said na yung brake master yung may leak and need palitan.

    Although wala naman din ako napansin na kakaiba sa pagbrake, normal naman lahat. Yun leak nya super slow lang talaga. Ginamit namin sya kahapon and kaninang umaga hindi naman bumaba yung level.

    Need ko na maghanap ng brake master since wala daw sila at medyo recent pa yung car. Thanks guys!
    Anong car ba yan? Usually yung kit lang pinapalitan.. wag mo patagalin kasi corrosive sa paint yan..

  8. Join Date
    Sep 2019
    Posts
    107
    #18
    Quote Originally Posted by yapoy86 View Post
    Anong car ba yan? Usually yung kit lang pinapalitan.. wag mo patagalin kasi corrosive sa paint yan..
    2015 Mazda 3 skyactiv sir.

    Actually iniisip ko nga hindi kaya dahil sa pag overfill ng erpat ko ng brake fluid above sa max line kaya medyo wet dun sa may brake master kanina?

  9. Join Date
    Mar 2008
    Posts
    52,727
    #19
    Quote Originally Posted by tensazangetsu View Post
    2015 Mazda 3 skyactiv sir.

    Actually iniisip ko nga hindi kaya dahil sa pag overfill ng erpat ko ng brake fluid above sa max line kaya medyo wet dun sa may brake master kanina?
    let's find out!
    fill your reservoir to the mark, and clean your brake master area.
    observe fluid levels daily. see if your brake master area is wet.
    be sure to "lock your car away from your dad's well-meaning ministrations".

    replacing the brake master cylinder is the easier but more expensive way to rid yourself of brake master woes.
    but if the cylinder wall isn't worn, a much cheaper repair kit may just do the job. the mechanic can usually decide if the cylinder walls are worn or still fine, after opening it.

    good luck.
    Last edited by dr. d; December 21st, 2019 at 03:24 AM.

  10. Join Date
    Sep 2019
    Posts
    107
    #20
    Quote Originally Posted by dr. d View Post
    let's find out!
    fill your reservoir to the mark, and clean your brake master area.
    observe fluid levels daily. see if your brake master area is wet.
    be sure to "lock your car away from your dad's well-meaning ministrations".

    replacing the brake master cylinder is the easier but more expensive way to rid yourself of brake master woes.
    but if the cylinder wall isn't worn, a much cheaper repair kit may just do the job. the mechanic can usually decide if the cylinder walls are worn or still fine, after opening it.

    good luck.
    We tried to clean the brake master area and we observed it after using it for 1 day.
    After 1 day, wet dun sa may bolt ata nung brake master parang luha lang sya. Sobrang kaunti lang din nabawas dun brake fluid level wala pa siguro 1 tablespoon. Iniisip namin baka may gasket dun na naglealeak? Papa 2nd opinion namin sa 27 sa isang shop para sure before kami bumili ng brake master.

    Thanks doc!

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Brake fluid level decreasing very slowly?