Toyota Corolla 10th Generation Altis Owners [continued]

**_Cathy_** · October 4th, 2015 05:00 PM

Originally Posted by vinj

The silver 10th gen or the driver?

I see a black gen10 w the gen11 rims plus lowering springs. Nice and clean.

I don't notice the driver anymore. Just the car. It looks so clean

**Aleman** · October 5th, 2015 08:45 AM

The 11th Gen rims on the 10th Gen indeed looks nice, although what I was able to get was the GT86 rims and tires which is 17". It actually has almost the same spoke pattern as the 11th gen rims, only a bit curvier.

**hops** · October 6th, 2015 12:02 AM

Where can i buy touch up paint for toyota altis?

**vinj** · October 12th, 2015 10:38 AM

Replaced the front shocks of my Gen 10.5 (55,000kms). KYB Excel G's cost P 3,250.00 per piece at Toyorama. I forgot how smooth the Altis can be. :D

Originally Posted by hops

Where can i buy touch up paint for toyota altis?

Try to check with the auto paint supplies to mix up a small bottle for you.

**kiamoyman** · October 13th, 2015 05:08 PM

Hi guys, I just noticed that my 1 month old tire - front (BS Ecopia) looks different in my rear tire. Muka shang kulang sa hangin pero when I tried to inflate it at 30Psi same padin. Is something wrong with the tire that I bought?

**kiamoyman** · October 13th, 2015 05:08 PM

Hi guys, I just noticed that my 1 month old tire - front (BS Ecopia) looks different in my rear tire. Muka shang kulang sa hangin pero when I tried to inflate it at 30Psi same padin. Is something wrong with the tire that I bought?

**Aleman** · October 13th, 2015 05:25 PM

I am no expert at cars but I think it is mainly because the front is heavier compared at the back since the engine is located at the front.

Originally Posted by kiamoyman

Hi guys, I just noticed that my 1 month old tire - front (BS Ecopia) looks different in my rear tire. Muka shang kulang sa hangin pero when I tried to inflate it at 30Psi same padin. Is something wrong with the tire that I bought?

**Aleman** · October 13th, 2015 05:25 PM

double post

**kiamoyman** · October 13th, 2015 08:13 PM

Originally Posted by Aleman

I am no expert at cars but I think it is mainly because the front is heavier compared at the back since the engine is located at the front.

That's what I thought too but I didn't notice this on my previous stock tires though. Hope someone can enlighten us on this.

**Stigg ma** · October 13th, 2015 08:44 PM

Originally Posted by kiamoyman

Hi guys, I just noticed that my 1 month old tire - front (BS Ecopia) looks different in my rear tire. Muka shang kulang sa hangin pero when I tried to inflate it at 30Psi same padin. Is something wrong with the tire that I bought?

30 PSI??? mali yata, ano naka lagay na tire pressure sa owners manual for the front tire?