Detailing Thread [For Newbies][ARCHIVED]

[newbie81]

Hi,

I'm lost.hehe looking for a thread for body kits. Is there one?

[scharnhorst]

isang araw lang ako di nakapag check, baha na agad ang thread na to!

*SG: yan! yan mukhang galing pang casa! nice detail, sir!

walang pasok sa 24! detail time! :rofl:

*aejhay: yung ginamit natin mostly yung compound at yung DACP... hehe. kaso hindi talaga natin nagamit yung diamond cut.

which is better?

Nano sliq vs OGE --> (pano umorder nito k sir edwin and how much?)

Nano gloss vs Mom Step 2

476s vs Moms Step 3 ( i know Step 3 will lose here in terms of durability... i just wanna know though how step 3 will measure up, like if 476s can provide protection for a week or 2, how abt step 3? Also, how does Step 3 compare in terms of shine, beading, etc...)

step 3 can provide protection until it gets rained on. I tried this. yung bumpers ko, linagyan ko ng step 3, the rest, 476. In terms of shine, wala masyadong pagkakalayo, especially kung may step2 sila parehas underneath.

pero after nung next wash ko, wala nang beading sa bumpers.

hmmm.. oo nga. I still have step 2, but mas maganda ba ang nanoglos for filling in defects?

*madkatz: thanks for the information, ma'am! Another query... do I have to wait a couple of hours after applying step 2 before putting the 476?

[aejhayl17]

*aejhayl17: hmm i'll try to come up with a write up for that, but for now i need to crash, but a better suggestion would be text my BF and ask those and have them demo'ed personally.

thanks mam.

sir edwin did demo'ed a no. of the products at the eb and i learned how to use them immediately, however i got very confused of the names of the products.

anyways, my dad think she saw a Makita rotary buffer on sale for 9.5k(converted from BhD) at Geant(something like a really big Puregold there), is it a good buy? mura na ata yun, kase sabi ni sir edwin po nasa 12k-15k locally ang Makita. and im planning to buy the detailling products mam abroad(Bahrain) if its available and cheaper there.

thanks again mam madkatz .

[Starex_Gold]

doc scharn: Salamat!

Kaya nga galit na galit nanaman sa akin si Gen. Miting/Oldblue/RingoStarr/Jetsetter eh :hysterical:

di nya matanggap panis nanaman Santa Fe nya

[rockstar5k]

*SG, sir sealer and glaze palang panalo na sa kintab a!
*aejhay, sir try nio sa Alonzo Street,Sta Cruz, meron ako napagtanungan ng 9227 dun. around 9K complete set.

[jmpet626]

Mura na yung makita kung ganun pero ingat din kasi may mga fake din na makita. Di ko lang sure kung pano malalaman. Nag dadalawang isip pa ko kung kukuha na ko ng rotary parang nakakatakot kasi. For now portercable muna ako

[azzkkr2600]

from my BF via SMS

"if anyone is interested in getting the quart sizes, please text me ASAP since im still trying to bargain the shipping cost down, i don't know if they're sharing the quart size or the gallon size but i called ADS and they said the offer is up until friday only"

i'm interested! how much are we to shell out? what products are we importing?

guys hati hati tayo!

[mf051404]

*mf051404: Wow that stuff is kinda old school! yes its pretty much the same except that vaporwax is a lot more like a cleaner that really brings out the color of the paint, Nano Sliq is a QD that is basically gloss enhancing agents applied to the paint, basically vaporwax is like a cleaner spray wax. For both you need to use a MF cloth, for the vaporwax i haven't really used it that well to comment too much on it since i basically used it only once and its damn expensive to worth risk buying one top that with pretty bad reviews from most of the detailing forums the world over, but what we did was just use the aerosol spray to mist a little and let it dry for the cure time and remove it via MF cloth, Nano Sliq works pretty much the same without the wait. As for the Nano Glos, Nano Glos for me fills better and looks better, it doesn't always mean that if a wax is harder to remove that its more durable especially if its from TW, the only wax from TW i use are TW Platinum Paste and TW Black Box.

Easy to apply but durable for me would be, Liquid Glass Legend, Chemical Guys M-seal, or Chemical Guys Jet-seal, Jeff Werkstat Acrylic protector. Some products that can be also equally good but requires proper technique would be KSG and Collinite 476

Thank you very much! well said...good thing you mentioned Collinite 476s, because I just bought it, because it is now on sale at 50% off from AutoBisyo (and good reviews of course) ... it seems if you are after long-lasting protection and not gloss or shine, then go for industrial strength waxes/sealants, not OTC stuff...am I right?

[mf051404]

Another question po sana...ano po maire-recommend niyong brand na pantanggal ng mga talsik ng spalto sa paint? Yung iba kasi kerosene lang ginagamit, hindi kaya matapang masyado to para sa paint?

[madkatz]

which is better?

Nano sliq vs OGE --> (pano umorder nito k sir edwin and how much?)

Nano gloss vs Mom Step 2

476s vs Moms Step 3 ( i know Step 3 will lose here in terms of durability... i just wanna know though how step 3 will measure up, like if 476s can provide protection for a week or 2, how abt step 3? Also, how does Step 3 compare in terms of shine, beading, etc...)

Step 3 when well maintained can last up to 2 weeks during rainy season, however what doc said is true that the water beading is drastically reduced after the initial wash, Step 3 doesn't really seem to fare well against soap and detergents unlike its collinite rivals, as for gloss i would say that Step 3 fares better in terms of gloss for me if used as a stand alone product.