Isuzu Dmax Owners [ARCHIVED]

**rna800** · September 26th, 2008 07:15 AM

Originally Posted by pokerbud

hey guys! help me naman sell my friends DMAX 2005 model 4x2 silver with caryboy bedliner. 0920-911-63-68 i dont know how much ang going nito e. pero sabi nang friend ko ako na bahala..

thanks a lot

alvin garcia

Please post this in the classified ads section. It would be easier to sell it there.

**zeus2004** · September 26th, 2008 01:01 PM

hi guys, nakapagpost na ako dito noon at nag inquire regarding DmaxLT, ngayon meron na ko DmaxLT, ito lang kasi kaya ng budget, glacial white color, despite base model lang ito, satisfied pa rin ako sa performance especially sa fuel consumption, nag average pa rin siya ng 12-14 km/liter, kinabitan ko pa nga ng 255/70R15 Falken na tire from the original niya na 215/70R15 Bridgestone, kailangan lang lagyan ng 1mm spacer para hindi sumayad sa stabilizer bar kung liliko, mas stable siya at hindi matagtag, ito kasing Falken tire ko galing sa previous TFR1995 Isuzu pickup ko at mga 10K Km pa lang ang life, gi-swap ko tire before ko binenta ang TFR, ok naman, almost 3K na odo ko ngayon sa DmaxLT, so far no problem, go ISUZU!

**rna800** · September 28th, 2008 07:34 AM

I just wanna share. We went to Seven Corners restaurant in Crowne Plaza last night to have dinner. I parked in basement 3 and when I was about to trigger the alarm, it didn't want to work anymore. No matter how many times I pressed the remote, it just didn't want to trigger. There were also 2 other car owners who came out of their cars and maybe my alarm got confused because of the other frequency. I used the manual method of locking. We left around 11 pm and good thing it already worked when I used the remote in opening it.

**romel.krypton** · September 29th, 2008 09:01 AM

hi mga dmaxers... finally i got some pics sa Tornedo red Dmax ko. ask po sana ako assistance kung san ako makahanap ng procedure to picture upload.

Sir rna 800. ganda po ng ride nyo.. Sir bakit kaya hindi nilagyan ng plastic cover yung Bolt ng front seat. sana kahit mag benta na lang sila ng plastic cober para dito.

Share ko na rin yung experience ko about sa accessories, last week pumunta ako sa Banawe and amazed talaga ako sa prices ng mga accessories, its 30 to 40 percent cheaper than dito sa Cebu. Bumili ako ng Fender cover. Nakuha ko lang ng 3.5T, dito sa Cebu 6.5T kasi. The problem is, nung kinabit ko na dito sa Cebu, hindi sya Fit. parang intended ata to sa previous models... sayang

Ask ko na rin po sana kung meron po sa inyo nag pakabit ng Backing sensor. Share nyo naman po kung san nyo kinabit. Gusto ko sana magpakabit, kaso napaka sayang na butasin yung very shiny stainless rear bumper.

**rna800** · September 29th, 2008 09:36 AM

*romel.krypton: Sir, in order for you to attach photos here, you must first register in a photo hosting website which in my case, I used www.photobucket.com. Take pictures of you car and upload them in your PC. Once you have already them, upload it in that site then copy the link in box that says "Direct Link" and on the tsikot website, go to post reply and click the "Insert Image" button and paste it there.

The difference in prices there as compared to here is perhaps due to the shipping and handling charges especially if those accessories will come from Manila too. Sir, what do you mean by fender cover? Could you please post a picture of it? You should've asked them if that would fit in the 08 Dmax. Or call them and ask them if you could return it since it didn't fit in your truck or maybe there are shops there who could make it fit.

With regards to the covers of those screws, I sure hope that there will be a remedy for that since I find it unappealing too.

The back up sensor, I tried to zoom the picture from auto-searchphilippines website and it looks like they put it in the plastic part beside the stainless. Here is the picture:

**x_jason_x** · September 29th, 2008 07:17 PM

I placed back up sensors of my dmax. Placed it in the plastic part. Been using it for almost 3 years. No problems so far just make sure na pulido yun gagawa.

**st_omach** · September 30th, 2008 06:05 AM

Oo nga, kainis walang cover yun mga bolts ng front seats!

**st_omach** · September 30th, 2008 06:06 AM

Ano kaya gagawin ko para matakpan yun bolts? May nabibili po ba nun?

**Memphis Raines** · October 1st, 2008 10:59 AM

^^ Have you tried asking your dealer to give you the covers? Your truck is brand new so they should provide all lacking components. These things happen.

I removed mine kasi natatanggal whenever I clean my interior, not perfect fit kasi eh

.

**rna800** · October 1st, 2008 02:23 PM

*x_jason_x: Where did you buy your sensors and what brand, if you could still recall?

*st_omach: I just hope that there is a remedy for that... By the way, how's your truck doing so far, maam? Have you put any accessories in it already? Mileage?

*Memphis Raines: I just don't have any idea what's their reason for not putting covers on those bolts. To make matters more interesting, they put a cover on one bolt, but they didn't put on the other one - this on on both front seats. It's so weird. Maybe if we put covers on those bolts, we'll end up removing it too since I feel that it will not be a perfect fit. The covers on the other bolts look fit though.