New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 17 of 17
  1. Join Date
    Aug 2003
    Posts
    9,720
    #1
    Hi peeps, looking for 2kva UPS for home. Aside from APC anong magandang brand? Eaton seems to be a good alternative. I'm told FSP makes good PSU's, not sure about their UPSEs.

    Nakikita ko rin kebos/ibos, but the price makes me a bit suspicious.

    Tia

  2. Join Date
    Oct 2002
    Posts
    15,528
    #2
    using salicru at home.

  3. Join Date
    Oct 2002
    Posts
    21,433
    #3
    I've used a lot of cheap brands before, usually less than a year nagkakaproblem na, even after replacing the battery.
    Kaya puro APC na gamit ko now.
    Signature

  4. Join Date
    Jul 2013
    Posts
    421
    #4
    can't recommend a brand, however, if you know a electronic techn, there's a kit in alexan, magpa-assemble ka na lang. magtanong ka ng presyo duon. kung mas mura sa mga commercial models, magandang option ito coz it is easier to repair. parts are readily available at may diagram ka pa.

  5. Join Date
    Nov 2010
    Posts
    25,276
    #5
    Quote Originally Posted by badkuk View Post
    Hi peeps, looking for 2kva UPS for home. Aside from APC anong magandang brand? Eaton seems to be a good alternative. I'm told FSP makes good PSU's, not sure about their UPSEs.

    Nakikita ko rin kebos/ibos, but the price makes me a bit suspicious.

    Tia
    APC and Liebert. Pero mas okay talaga APC.

  6. Join Date
    Oct 2008
    Posts
    592
    #6
    FSP 1kva 24/7 user for 2 years to date. ups activated time is now less than before. seems like a robust unit. i'm now using windows power saving/sleep option.

  7. Join Date
    Jan 2009
    Posts
    6,450
    #7
    What is the intended usage and duty cycle?

  8. Join Date
    Aug 2003
    Posts
    9,720
    #8
    Quote Originally Posted by oj88 View Post
    What is the intended usage and duty cycle?

    Bumili po kami ng oxygen concentrator for my dad; it's rated at 220v, 2.2Amps.

    i'm just thinking about the impending power crisis next year; we intend to buy a genset, but i'm thinking a UPS can will the gap between the switchover from Meralco to genset.

    Despite the 1-2kva rating, backup times for APC and Eaton models(as is) can only provide <10 min backup time, which i think is just too short. Using APC and Eaton's runtime calculator, to provide for 10-15 min of backup power, i'd either need to get a really expensive model(Eaton DX2000) or one with an external battery pack(APC).

    imho, parang hindi sulit yung price-vs-backup time ratio, so i started this thread/ in parallel.

  9. Join Date
    Jan 2009
    Posts
    6,450
    #9
    Since it is going to be used for life-support systems, I suggest that you splurge on a proper UPS instead of building a charger/battery/inverter yourself.

    I'm not saying that you should get a medical grade UPS (which would be best under the circumstances) but something that is at least reputable and up to the task... enterprise class units comes to mind. APC's SmartUPS series would be a good compromise, IMO. It has a clean output (regulated and outputs a pure sine wave) instead of an approximated (relatively dirty) sine wave from most entry-level UPS's.

    10 minutes backup time should be more than enough to prep and start a genset. As with anything, just make sure that it is well-maintained so that the transition time is kept to a minimum.

    Your call.
    Last edited by oj88; December 23rd, 2014 at 10:39 AM.

  10. Join Date
    Nov 2009
    Posts
    3,522
    #10
    Ups are not meant for long commercial power outages. For sensitive life support equipment, ups+generator set + automatic transfer switch should be the combo. Get the online-type/double conversion ups, any brand as long as its online and pure sinusoidal..

  11. Join Date
    Aug 2003
    Posts
    9,720
    #11
    i was looking at the Home/Home Office section all this time, ngayon ko lang nakita to. Will this do?

    APC Smart-UPS RT 1000VA 230V

    And saan kaya pwede makabili ng mura? tia

  12. Join Date
    Nov 2009
    Posts
    3,522
    #12
    Afaik surt series with double conversion starts at 3kva(cost around 60+k some 6yrs ago), below that are line interactive only and stepped sinusoidal(this is undesirable for electric motor operated load)..

    Check smart series 2kva i think its readily available at villman, specific ups vendors would give you about that same price.

  13. Join Date
    Aug 2003
    Posts
    9,720
    #13
    Quote Originally Posted by 12vdc View Post
    Afaik surt series with double conversion starts at 3kva(cost around 60+k some 6yrs ago), below that are line interactive only and stepped sinusoidal(this is undesirable for electric motor operated load)..

    um sir, nakasulat sa specs ng SURT1000XLI:

    Topology Double Conversion Online
    Waveform Type Sine wave
    Last edited by badkuk; December 23rd, 2014 at 04:31 PM.

  14. Join Date
    Nov 2009
    Posts
    3,522
    #14
    Rm=rack mount? Seriously are you going to put the equipment in fixed position besides the bed? You will probably need a 19 incher open ETSI rack.. Goodluck with that, i guess theres some cabinet enclosure with casters.

  15. Join Date
    Nov 2009
    Posts
    3,522
    #15
    Some of the UPS brands i worked with.

    APC-Merlin Gerin
    Emerson-Liebert
    Deltec
    Salicru
    Victron
    Delta
    PowerOne
    Eltek-Valere
    Eaton
    FSP
    Tripp Lite

    I still recommend APC for home use, service center is just at QC.
    Last edited by 12vdc; December 23rd, 2014 at 05:07 PM.

  16. Join Date
    Oct 2006
    Posts
    5,994
    #16
    I'm using Cyberpower in my computers for our POS and other stuff. Seems all right so far.
    Damn, son! Where'd you find this?

  17. Join Date
    Mar 2015
    Posts
    8
    #17
    would recommend APC....

Tags for this Thread

recommend a UPS brand