
Originally Posted by
OldSchoolHack
Sir make your setup more effective rather than increasing aircon loading. Suggestion lang po.
1. Try creating funnels so you can redirect all exhaust of your PCs outside. Tipong itapon mo yung hot air palabas shop mo.
2. Replace all your monitors to LCD. Believe me mataas heat load ng lumang CRT monitors kesa sa LCD monitors.
3. Seal the area. Kung pwede ibaba mo yung kisame. Lower mo tapos install mo insulating media para di malaki load aircon. Kung 10 feet or 12 feet e ibaba mo ng 7 to 8 feet.
4. Sunlight from outside adds load. Lagay ka ng sunscreens or tint mo (pang bahay wag pang auto) windows. Wag posters lang. Kung pwede lagay ka insulator sheet - parang silver one side.
5. Keep doors and windows shut tight.
6. Will electric fans inside help? Depende. Pero most of the time it will not. Why? Fans run with motors which get hot.
7. Multiple window type aircons are better than one big aircon. Why? So you can shut down the other units kung walang tao sa shop mo. Just remember all aircons must have the same settings when in use.
8. Put shades or a roof outside your shop. It helps if the outside area is kept cooler.
9. And like cars, always keep your airconditioners clean both in the evaporator area (loob) and condenser (labas). Clean mo monthly aircon, weekly filters.
Good luck.