New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 41
  1. Join Date
    Oct 2002
    Posts
    1,157
    #21
    reminder yung orig na (555) triple five ay may hologram ang karton parang sa VCD na orig heheh.

  2. Join Date
    Oct 2002
    Posts
    10,603
    #22
    Beefy, i get my 555 parts from Motorix in Banawe. Siguradong orig. Kilala na ako dun kasi lahat ng parts ko dun ko kinukuha and pintura na lang ang hindi ko pa pinapapalitan sa Pajero ko.

    Orig 555 products have a hologram which says 555 and part of the box has 555 stamped onto it.

    30K? sheesh, i replaced those exact same parts, and then some, for a third of that price :D

  3. Join Date
    Oct 2002
    Posts
    10,603
    #23
    beefy,Sa three-five parts... (may tawad pa)

    1. Upperarm assembly = ???
    2. Lower ball joint = P800
    3. Inner and Outer Tire rod = Inner P750, Outer P650
    4. pitman arm = P1100
    5. Idler arm = P2000+ (last year ko pa pinalitan)

    attend the dc eb, i'll take a look at your suspension. Typically, i get P50 off each part.

    Maki, saan ka nagpapalit ng Upper arm bushing??? matagal ba?

    alfred, pinalitan ni ferdz yung pitman ko, pero andun pa rin yung kalampag. Suspension arm bushing na lang ang hindi napapalitan. mahirap ba yon?
    Last edited by pajerokid; October 15th, 2003 at 03:14 PM.

  4. Join Date
    Oct 2002
    Posts
    163
    #24
    Thanks a lot Pajerokid and to everyone! :D

    I pulled out my pajero this morning from the cas(Diamond Santolan) and had it rechecked at Servitek.

    Sabi ng mechanic, ball joint lang kailangan palitan.. no need to change yung iba. They quoted me for 1,300 for each ball joint(same price as Diamond as they are official distributor of mitsubishi products).

    One last thing, what is this 555 brand? Is this Orig Mitsubishi?

    Pajerokid, reliable and reputable ba yung Motorix?

    Thanks everyone!

    btw, these are the prices of the parts at Mitsubishi

    1. Upperarm assembly = 4500
    2. Lower ball joint = 1348
    3. Inner and Outer Tire rod = Inner 1500, Outer P932
    4. pitman arm = P3478
    5. Idler arm = P2532

  5. Join Date
    Oct 2002
    Posts
    22,658
    #25
    Three-Five is a Japanese company which makes replacement suspension parts for most popular vehicles. They used to have a website, I don't know if its still up.

    I think they also supply manufacturers on an OEM basis in some regions. But those parts don't wear the Three-Five brand anymore since they are sold in OEM packaging.

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  6. Join Date
    Oct 2002
    Posts
    163
    #26
    Is it as good as mitsubishi oem parts?

    Accdg to Pajerokid, 555 ball joint is around P800 while mitsubishi's around 1300

  7. Join Date
    Oct 2002
    Posts
    1,012
    #27
    yah, it's as good! take it from us, nasubukan na namin ang 555 as long as its genuine. naku, eh nagkalat ang fake na 555 so be careful! take the advise of pajerokid and go to motorix.

    there is a premium in buying mitsu orig parts or any other OEM parts for that matter. but please remember that most of the wearable parts are supplied by independent manufacturers.

    ang daming magaling gumawa sa labas ng casa especially dito sa tsikot: glennster's shop, autoxer's shop, and pajerokid's recommended shop- motorix.

    heck, i even do not go to bmw casa anymore for my E36 because of my frustrations with them!!!

  8. Join Date
    Oct 2002
    Posts
    10,603
    #28
    Ako rin sir Woodfire, Its been years since i've seen the inside of a casa (hindi yung patay sindi heheheh). Iba kasi ang singilan sa kasa, bawat hawakan nila may corresponding charge. Actually ganyan din ang motorix, but at half the rate siguro.

    Actually beefy, i dare say that 555 parts are even better than OEM! Why, because all their suspension parts come with grease nipples! Yung oem natin sa pajer, hindi serviceable yung ibang parts like (correct me if im wrong) the all joints and tie rod ends.

    tutal, were talking about suspensions... tulong naman!!! merong mysterious kalampag yung Pajero ko huhuhuhu!!! im actually thinking of selling it off and getting an E36 (idol ko si sir Woodfire eh :D ). Which is a shame coz parang brandnew talaga yung ride except for that kalampag! arrrrgh!!!!

  9. Join Date
    Oct 2002
    Posts
    163
    #29
    ok ba gumawa ang motorix? P800 lang charge(labor) ng servitec to replace ball joints

    Di ko tuloy alam kung bili ako sa motorix then pagawa sa servitec or sa motorix narin pagawa...

    btw, pag inayos yung ball joint, ma-aapektuhan ba yung selectable suspension ngpajero? I mean will they manipulate the shocks and do they know how to put it back

    thanks

  10. Join Date
    Sep 2003
    Posts
    1,306
    #30
    beefy,

    mababa talaga mag-quote ang servitek .. dahil pag nabaklas na nila yung papalitan eh meron silang ibang makikita..

    tulad nung nangyari sa liteace namin last year .. ball joint lang dapat palitan sabi sa servitek.. nung nabaklas na yung ball joint eh marami na nakitang sirang parts.. ayun suspension lang ata hindi kinalas.. inabot din kami ng halos 8K sa parts ang labor including na alignment ... 555 ang ginamit ng servitek.. normally eh nagbibigay ng 5% discount servitek sa west ave... pag suki ka ata eh 10% discount.. konting bola lang sa supervisor eh yakang yaka mo na

    mas maganda eh panoorin mo habang ginagawa nila at di nila madaliin..

    ang advice ko lang pang ni-align na yung mga tires mo eh wag mo pababaklas yung steering wheel.. minsan kasi eh align na gulong mo pero naka-kabig sa kanan or kaliwa yung steering wheel pag straight driving.. insist on correcting it sa tire mismo...

Page 3 of 5 FirstFirst 12345 LastLast
Suspension Problem major repair..