Results 21 to 30 of 39
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
June 26th, 2007 04:53 PM #21
-
June 27th, 2007 08:31 PM #22
I was about to fabricate a hitch receiver yesterday. I already got 2 pcs 2.5"x1/4" angle bars to form the square tube. But I noticed that the inner thickness of the angle bar is not the same as the outer thickness, hence, it won't make a perfect inside square which will make my bike rack shake when the vehicle is moving.
So I just went to Dayu in Dau and got his hitch receiver:Last edited by boybi; June 27th, 2007 at 08:34 PM.
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
-
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
June 27th, 2007 09:11 PM #25mukhang maganda naman yung yari....no wonder pinagplanuhan mo na iDIY yan...parang simple tingnan...
napagkwentuhan namin ni Dayu, nasa P2000+ na nga yung kuha nyan dun sa US na tubo na yun (he got it the last time he was in US)
-
June 27th, 2007 09:16 PM #26
Ngek, P2000+ lang pala yun? Sabi nya P3500 daw nya nabili yun kaya ganun ang bigay nya, +labor +bolts +plate kaya naging P4500.
-
June 27th, 2007 10:20 PM #27
boybi mukha ka daw kasi big time kaya mas mataas singil sayo. hehe
maganda naman pagkagawa, pwede pang tapakan pag sasakay ka sa likod. parang bagay lagyan ng step board ng gen 2. sa taas para mas astig.
-
June 27th, 2007 10:27 PM #28
Buti pa sa Australia, standard na yung hitch receiver:
promdiboy, matibay naman yung bumper, nasubukan ko nang tapakan and kaya naman ako.
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
June 28th, 2007 07:01 AM #29baka sinama nya pamasahe (sa US) kaya umabot P3500....hehehe
pero si Ride (banawe) mas mahal yung ganyan niya .... merun akong nakita dati near P7000, tapos ganyan na ganyan din yung itsura (pang LC nga lang)
Oo nga sa Australia halos lahat ng sasakyan stock na yung hitch (pati yata oto merun).
-
Puwede i try, 1. Palit air filter 2. Linis throttle body 3. Linis MAF sensor 4. Check spark...
high idle RPM at engine start