Results 11 to 20 of 26
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 73
July 2nd, 2005 09:32 PM #11Originally Posted by alwayz_yummy
wala ka nang ibang ginawa to avoid changing the angle of the of the pinion flange? wala bang vibrations sa driveline/driveshaft mo?
may LSPV ba Delica?
-
Tsikot Member Rank 4
- Join Date
- Oct 2004
- Posts
- 2,315
-
July 3rd, 2005 05:38 PM #13Originally Posted by Engr
sa rear, i just changed the shackle...that all...i didnt change other than this....
i think the stock delica under parts is adjusted to accomodate up to 2 inches... maybe if i use the 4 inch setting, then it would be a problem...
i didint recieved any vibration of any kind...and it gave me a good ride height, a more "elf-truck" ride height to be exact..the only slight difference it makes is the way you ride up....the stepboards are more useful now than it was stock..but right now(from july2-13, 2005) i find my lift as inconvenient..for my left ankle is sprained becuse of a common house accident:the stairs.
sir, dont know kung may lspv ung delica ko......pero teka, anu nga pala ung "LSPV"
-
July 3rd, 2005 11:15 PM #14
Longer shackles are manufactured by Jewel's in Malabon. They are the shop that did my lamp stay.
02 2884340 look for linda.
But I do have to warn you that Jewel's does charge a premium for the quality of work they do.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 73
July 4th, 2005 12:11 PM #15quiksie, alwayz_yummy, salamat sa mga feedbacks nyo.
from http://www.4crawler.com/4x4/ForSale/Shackles.shtml
the rear axle has a "Load Sensing Proportioning Valve" (LSPV) that attaches to the rear axle to sense the ride height and by inference, the load or weight on the rear axle. It uses this "Load Sense" to adjust the front-rear brake pressure "proportioning" to keep the brakes balanced. With a rear axle shackle lift, for each inch of lift, you'll want to adjust the LSPV upward 1" to compensate for the lift. If not done, the LSPV "thinks" there is less load in the rear of the truck and it reduces the rear brake pressure.
thanks everyone.
-
July 4th, 2005 02:39 PM #16
ur welcome...
i think wala naman delica ku nun...kasi pareho naman ang braking power parin,e...
gud luck nalang din!
-
July 4th, 2005 06:01 PM #17
May LSPV ang Delica. It's the thingie with the springie coming from the rear axle. Unless hindi na kinabit ulit ng nag-convert. LSPV's are pretty much a standard thing on trucks and commercial vehicles.
Engr,
Tawag ka na lang sa kanila. Tapos na kasi ang project ko with them kaya hindi ako nakakadalaw. hehehe.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
-
July 7th, 2005 10:00 PM #19Originally Posted by Engr
Pero yung LSPV kelangan adjust 70-80% of your total settled height. Kung di ito adjusted, rear brakes will apply normal braking pressure even if the vehicle is loaded since the spring which should adjust the sensor doesn't have that much yank than it used to.
-
The backup charger finally arrived. Here are my findings and conclusion at the end:
My Dongfeng Nanobox - a case study of an electric...