New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 88 of 145 FirstFirst ... 387884858687888990919298138 ... LastLast
Results 1,741 to 1,760 of 2898
  1. Join Date
    Jun 2007
    Posts
    146
    #1741
    I will PM you the contact number of ryan lee

  2. Join Date
    Jan 2008
    Posts
    830
    #1742
    guys, where i can find oem cross joint for the front propeller shaft?

    mine is deffective as per nissan's mechanic. i was complaining for a slight vibration when the speed hits 100 kph and the frequency is getting stronger as the speed goes more than i've mentioned.

    what they're offering is one whole assembly of front propeller shaft which costs more than 30K.

    thanks in advance.

  3. Join Date
    Jun 2012
    Posts
    85
    #1743
    does anybody know anong size ng bfgoodrich allterrain yung para sa navara?

    and where can you obtain those? kasi i asked from a local store here in davao, sabi nila closed na daw yung nagmamanufacture ng bf goodrich tires dito sa philippines.

  4. Join Date
    Dec 2011
    Posts
    6
    #1744
    Ask ko lang sana kasi meron akong roller lid then na stuck sya d na siya nabubuksan ng malaki ang sabi sa mismong carryboy 1500 daw service nila super mahal. May nakakaalam ba sa inoy kung saan ok pagawa nto?or pwede nyo sana ako truan para dto Please po help help po girl po ako so medyo la pa kong learning about pick ups thanks

  5. Join Date
    Nov 2009
    Posts
    3,522
    #1745
    Quote Originally Posted by ghost recon View Post
    guys, where i can find oem cross joint for the front propeller shaft?

    mine is deffective as per nissan's mechanic. i was complaining for a slight vibration when the speed hits 100 kph and the frequency is getting stronger as the speed goes more than i've mentioned.

    what they're offering is one whole assembly of front propeller shaft which costs more than 30K.

    thanks in advance.
    Alin dito ang sira daw?

    4 crossjoint, i think kung madadala mo ang sample part sa suking auto shop may equivalent part yan.
    Pero safe side syempre ang casa gusto palit buo para less ang i-iisolate nila. Sa manual merong runout values to determine w/c part to replace.

  6. Join Date
    Nov 2009
    Posts
    3,522
    #1746
    Quote Originally Posted by isaa07 View Post
    Ask ko lang sana kasi meron akong roller lid then na stuck sya d na siya nabubuksan ng malaki ang sabi sa mismong carryboy 1500 daw service nila super mahal. May nakakaalam ba sa inoy kung saan ok pagawa nto?or pwede nyo sana ako truan para dto Please po help help po girl po ako so medyo la pa kong learning about pick ups thanks
    Baka kulang lang po sa lubricant yan.

  7. Join Date
    Jun 2007
    Posts
    146
    #1747
    I have seen alot of pick up trucks with defective roller lids, i have also seen the repair procedures of the personnel of carryboy. This has nothing to do with lubrications but rather a busted spiral spring. They normally cut the busted protion of the spring and bend whatever the remaining part like a hook and attach it back to a catcher of another lateral spring. Hehe! Malabo ba yun description ko?

  8. Join Date
    Nov 2009
    Posts
    3,522
    #1748
    ^ in short, tabas ang spring sa busted part then kabit ulit.. Quick fix untill theres nomore spring left..hehe
    Kaya ayoko nyan rollers

  9. Join Date
    Jun 2007
    Posts
    146
    #1749
    Korek! Kaya for me its neither soft lids or canopy

  10. Join Date
    Nov 2009
    Posts
    3,522
    #1750
    For me its either open or open bed, lolz.

    Seriously either bullbar or ladder rack..

    I admire pickups loaded with big cargo on the bed or anyting on tow bar, it reminds me that its a utility truck.

  11. Join Date
    Jun 2007
    Posts
    146
    #1751
    In my case, been more than 2 years without sny covering sa bed ko kasi i wanted it that way. I can carry 20 sacks of soiled linens without any problem but i witnessed some jumper boys at araneta ave corner del monte. Nakuha lahat yun laman sa isang hilux eventhough naka net pa siya plus the fact during rainy days i cant use my truck to help with the deliveries kaya opted na rin to install a canopy. Pero with a canopy limited nalang kaya load up, before kaya ng 20 sacks lampas bubong, ngayon kaya nalang ng 16 sacks

  12. Join Date
    Aug 2009
    Posts
    411
    #1752
    ALL NCP members, please take note : Nissan Patrol Club of the Philippines are asking if we could meet with them on July 21, pref after diner , details to be posted soon, please post if you can join this joint EB.

    participating:
    1.oj
    2.
    3.

  13. Join Date
    Jan 2008
    Posts
    830
    #1753
    Quote Originally Posted by 12vdc View Post
    Alin dito ang sira daw?

    4 crossjoint, i think kung madadala mo ang sample part sa suking auto shop may equivalent part yan.
    Pero safe side syempre ang casa gusto palit buo para less ang i-iisolate nila. Sa manual merong runout values to determine w/c part to replace.
    yong 37125k

    thanks man!

    they want me to replace the whole 37200 assembly...

  14. Join Date
    Dec 2011
    Posts
    6
    #1754
    Tahnks po sa ga reply so meaning po wala po akong papalitan na spring? Kasi baka mamaya bgla akong singilin ng malaki eh tahnks po

  15. Join Date
    Jun 2007
    Posts
    146
    #1755
    Before mo pagawa, make sure na ok na usapan ninyo na repair lang gagawin to avoid any over charging

  16. Join Date
    Jul 2009
    Posts
    2,628
    #1756
    Mga NAvara owners ask ko lang saan po kayo nag hahanap ng after market mags? Medyo weird kasi yung bolt pattern na 114.3x6 natin. Mas preferred ko po sana yun mga volk racing look 18s o 19s at the most. mga nakikita ko kasi usually nakakabit sa street mga chrome type 20s. Thanks in advance

  17. Join Date
    Dec 2011
    Posts
    6
    #1757
    Thanks again for the reply. Ask ko din pla is there anyone here have an experience kapg tumtakbo siya tpos my chain noise sa may left side of the pick up? Ano kayang cause nun? Kasi medyo dinig mo na may parang chain steel noise... Possible ba na bumper un? Kasi nabangga ung bmper ko last tym thank again fron right side ung binangga sa akin thanks po

  18. Join Date
    Dec 2007
    Posts
    1,961
    #1758
    Is anyone interested in a club day at Berrima diesel? I posted it on your facebook page but no replies.

    Good day Navara club, Just checking if your interested in a Club day at Berrima diesel, as you know I, aka dvldoc (devilsown alcohol injection) sell through them. We are looking to do a club day with you guys for some dyno's, dchips, give aways, some tuning and diesel workshops, discounted prices on items such as Baldwin and Fleetguard filters for you vehicle oh and of course some car show models . Club pres or reps give me a buzz so we can set up a day.
    Let us know if your interested to set up a day. I will also be there.

  19. Join Date
    Aug 2009
    Posts
    411
    #1759
    Navaraclubphil and Nissan Patrol Club of the Phil. joint EB

    UMC CRVI (Showroom) grounds Pasong Tamo Makati , 430 pm (saturday) July 21

    for Navara and Patrol owners who wish to be part of this event are welcome to join

  20. Join Date
    Sep 2009
    Posts
    93
    #1760
    mga sirs...

    is there a shop that can take a look at my 2008 navs engine belts & pulleys etc.? may maingay pag bagong andar na hindi

    ko ginamit ng mga 2 days, i will just let it idle for about a minute or two then mawawala. i had the two belts replaced at

    nissan gallery ( my request because they wanted me to leave the nav for 2 days then they will start it and hear the noise for

    themselves) but noise is still there but for a shorter period.


    thanks in advance

Tags for this Thread

Nissan Frontier Navara [continued]