Nissan exalta club

[Langdetan]

Good day to all of you. I would really appreciate it if someone posts pics of the FUSE DIAGRAM of the FUSELINK BOXES in the engine bay of an EXALTA 2001. Mine were erased that's why I have no idea what the fuses are for. Again, thanks in advance.

[dr. d]

Good day to all of you. I would really appreciate it if someone posts pics of the FUSE DIAGRAM of the FUSELINK BOXES in the engine bay of an EXALTA 2001. Mine were erased that's why I have no idea what the fuses are for. Again, thanks in advance.

try googling it, sir.
i did just that a minute ago, and there were several that popped up... see if yours is somewhere in there.

[dr. d]

sorry. double.

[speed unlimited]

To all Nissan Exalta enthusiast :
Iyong mga may gusto ng tambay session . May place ako sa Aurora Bld. Near Chinese Gen. Hospital .We can discussed problem regarding your car .Lets arrange the day most of us available .Jiens Sizzler open everyday from 11:00 AM to 2:00 Pm near Mercury Drug store and Silver Drug store .Hope to see everyone .THANKS.

[Langdetan]

try googling it, sir.
i did just that a minute ago, and there were several that popped up... see if yours is somewhere in there.

I already did sir and the only fusebox diagram that showed up was the one under the steering wheel. I need a pic of the FUSELINK BOX in the ENGINE BAY po. Tnx

[pablogilberto]

mga sirs, question, tuwing idle ako, bumabagsak yung RPM ko until mamatayan ako ng makina. Piangawa ko, they checked/replaced the alternator, throttle body and installed some device pero ganun pa rin pero this time, everytime na bumabagsak yung RPM, yung device na linagay nila mag kick in then tataas yung RPM. Obviously, this shouldn't be the case, right? Dapat hindi bumabagsak yung RPM hanggang mag stall. Anyway, the question is, ano pa bang sira na pwedeng paayos dun? AIRCON is ok, malamig pa naman and i'm suspecting either grounded or something related sa init ng makina. Nagtanong ako sa isang shop sa banawe, sensor raw for the RPM, tama ba yun? Anyway, papa check ko uli sa ibang mekaniko although nag bank in pa rin ako sa mga opinion dito para at least alam ko na sasabihin ko sa makakausap kong mekaniko, salamat uli mga sirs!

to add pala, kapag nag on na ng aircon, dun na nagsisimula yung pagbagsak ng RPM, kahit na kaka start pa lang ng auto, pero biglang tataas ung RPM kapag naka PARK o pinatay mo yung aircon, basta kapag naka DRIVE o REVERSE, dun bumabagsak yung RPM...

[madduck]

^try cleaning the throttle body at MAF sensor.

If you're looking for a new mechanic, I've had good experience with Autocraft sa Kamuning.

[rosean]

Hi mga masters! Ask ko lang po.. Ano po kaya problema ng exalta ko. Pag start ko gumagalaw ang idle (up and down) then after about 30 seconds ok na sya.

Is this normal??

Thank you po in advance!

[dr. d]

mga sirs, question, tuwing idle ako, bumabagsak yung RPM ko until mamatayan ako ng makina. Piangawa ko, they checked/replaced the alternator, throttle body and installed some device pero ganun pa rin pero this time, everytime na bumabagsak yung RPM, yung device na linagay nila mag kick in then tataas yung RPM. Obviously, this shouldn't be the case, right? Dapat hindi bumabagsak yung RPM hanggang mag stall. Anyway, the question is, ano pa bang sira na pwedeng paayos dun? AIRCON is ok, malamig pa naman and i'm suspecting either grounded or something related sa init ng makina. Nagtanong ako sa isang shop sa banawe, sensor raw for the RPM, tama ba yun? Anyway, papa check ko uli sa ibang mekaniko although nag bank in pa rin ako sa mga opinion dito para at least alam ko na sasabihin ko sa makakausap kong mekaniko, salamat uli mga sirs!

to add pala, kapag nag on na ng aircon, dun na nagsisimula yung pagbagsak ng RPM, kahit na kaka start pa lang ng auto, pero biglang tataas ung RPM kapag naka PARK o pinatay mo yung aircon, basta kapag naka DRIVE o REVERSE, dun bumabagsak yung RPM...

my old eccs sentra was like that before.. the mechanic just turned the air bleed screw 1/2 to 3/4 turn out (counterclockwise). he said there was too little air in the mix.. solved it!
i don't know if yours has such air bleed screw..
i hope this helps.

[Buging_King]

Question po, Ilan po ba ang Fan belt ng Exalta STA natin? Kapag nagpalit ba nito, need na din palitin yung bearing sa Pulley ba yun. Pa-advise naman po ng tamang process at kung may part number kayo ng replacement belt pa reply naman po. Thanks

[dr. d]

Question po, Ilan po ba ang Fan belt ng Exalta STA natin? Kapag nagpalit ba nito, need na din palitin yung bearing sa Pulley ba yun. Pa-advise naman po ng tamang process at kung may part number kayo ng replacement belt pa reply naman po. Thanks

the auto parts store should be able to give you a good replacement belt. they usually have the measurements of the more popular models down to memory. bringing the old belt helps, too, as the size is printed on 'em. i use mitsuboshi brand..
i replace the pulley when the bearing starts making noises. it takes lotsa years for that to happen. the last i replaced was back in the early 90s..
btw, in some models, the bearing can't be replaced; the entire idler pulley is replaced. it ain't that expensive..
good luck.

[Woody_Exalta]

Sir Speed. Yan po ba yung malapit sa Maceda St. Papuntang Tambunting?

[speed unlimited]

Sir Speed. Yan po ba yung malapit sa Maceda St. Papuntang Tambunting?

.
Tol oo iyong nagiisang stop light sa Chinese Gen Hospital. .Makikita mo silver drug kahilera noon at katapat iyong mercury drug. Sa gabi maganda ng mag tambay mode solo natin iyong parking sa gilid ng resto . Thank you iyong ibang gustong pumunta drop by lang kayo para magkaroon tayo ng sariling tambayan session.

[nujbc11111]

good day to every one, im planning to get a 2002 granduer, can you give me pointers? thanks


Posted via Tsikot Mobile App

[Buging_King]

Thanks, Dr. D. I already replaced my fan belt (AC/ALT and PS). Pabalik balik yung problema kong flickering dashlight. Nag-big 3 at grounding system na ako. nandun pa din. Minsan OK minsan andun yung flickering. May naka-experience na ba sa inyo ng ganitong problema? TY

[jcesteban]

Replaced my car's brake pads and rotors earlier this morning. Got a set of Bendix General CT brake pads for 850. The PowerPlus rotos cost 900 per piece. So far so good.

[speed unlimited]

Replaced my car's brake pads and rotors earlier this morning. Got a set of Bendix General CT brake pads for 850. The PowerPlus rotos cost 900 per piece. So far so good.

That's nice . Bendix is a good brand have mine for 4 years now.

[rosean]

Hi masters! Good day po! Ano po ba ang normal RPM before my exalta 01 a/t shifts gear? na observe ko po minsan 3000rpm bago mag shift ng gear and may kadjot/jerking motion. Ano po kaya ang problema or normal po ba ito?

Thank you in advance po!

[strawhat]

Hi masters! Good day po! Ano po ba ang normal RPM before my exalta 01 a/t shifts gear? na observe ko po minsan 3000rpm bago mag shift ng gear and may kadjot/jerking motion. Ano po kaya ang problema or normal po ba ito?

Thank you in advance po!

AFAIK normal yun kadyot pag nag gear up. about sa shifting ng gear, depende yan sa tapak mo sa accelerator. try mo i-floor down, mas mataas pa 3k yan bago mag shift hehehe

[bong_1925]

Any Nissan exalta club. To those who own Nissan Exalta post your user name.
1. Speed unlimited . Nissan exalta sta / SR20DE .

bong_1925. Nissan Exalta STA 2000