2011 Mitsubishi Montero Sport [continued]

[jaejae]

another project that i did,
this is one is almost perfect offset,
30mm, with 295 35 24 which is a bigger overall dia than your 285 50 20, but this one is bolt on, no modifications or no rubbing issues/ splashing whatsoever







why do i say "almost" perfect? look if your tires are perfectly centered on your mudguards.

i could not agree more sir.. perfect nga sa fender yung second post niyo sir...
maraming salamat sa info sir, tingan ko pag uwi kung ano pwede magawa, sundin ko na rin yung ginawa niyo... i hope it's not that hard as my offset is a bit less as well as the tire width... sabi ko na lang kay misis avoid na muna full turns if possible..

thanks sa feedback sir!

[ricciboy]

Sir zix, how to reduce offset ba?do i need to replace the tires or just need some modification? My splash din sa kin abot hanggang door knob reklamo nga c misis at panay linis nya, Id like to post some pictures but i dont know how

[zix888]

Sir zix, how to reduce offset ba?do i need to replace the tires or just need some modification? My splash din sa kin abot hanggang door knob reklamo nga c misis at panay linis nya, Id like to post some pictures but i dont know how

unfortunately wala na magagawa if kulang ang offset, delikado magshave ng mounting surface kasi ninipis yung kakapitan ng nuts. mas maayos pa yung sobra sa offset dahil ang dami na mga magaganda at matibsy spacers na available ngayon. pwede magkikitid ka ng tires, pero mawawala naman yung proteksyon sa lip nung wheels

[ricciboy]

So ill just leave it the way it is kelangan sipag lng sa pglinis, kunsabagay wala namang talsik kung walang ulan hehe.......

[zix888]

So ill just leave it the way it is kelangan sipag lng sa pglinis, kunsabagay wala namang talsik kung walang ulan hehe.......

medyo naghanap na ako ng remedy diyan before kasi may nagustuhan ako wheels pero low offset, syempre check muna kung may magagawa, may nakita ako oem extended flares, pero abroad, yung ginagamit sa rally, bolt on lang din siya, mas malapad ng 2", kaya sakto even sa low offset wheels. second option naman is extended flares na ididikit sa flares natin, i saw one na sobrang simple, although sa audi q7 ko nakita, pero i think pwede sa atin. third option is extended mudguard, sa ATOY, they can do that, dalhin mo yung oem mudguard tapos i-modify nila. buti na lang din hindi ko pinilit yung low offset wheels, at least wala ako problem ngayon sa splashing.

[butchyboy]

here is the cause of rattling sound there in the steering wheel area

monty clockspring - YouTube


after a diyÂ*


monty steering wheel rattling fix - YouTube

Sir Zix complicated ba pag disassemble and paglagay nung rubber sa clock spring? May naririnig na panu ko na parang plastic hitting a metal part sa may steering wheel, just like dun sa video mo, whenever medyo di patag yung road. BTW it started after I switched to 20" rims mga after 1 month, connected kaya yun?

[zix888]

Sir Zix complicated ba pag disassemble and paglagay nung rubber sa clock spring? May naririnig na panu ko na parang plastic hitting a metal part sa may steering wheel, just like dun sa video mo, whenever medyo di patag yung road. BTW it started after I switched to 20" rims mga after 1 month, connected kaya yun?

simple lang sir pagdisassemble, just make sure battery disconnected first, tapos pagcoconnect naman make sure airbag is connected, if not mag srs warning ka. anything na magcause ng vibration will contibute sa parts para magrattle, one of those is putting a bigger wheels

[butchyboy]

[U]

simple lang sir pagdisassemble, just make sure battery disconnected first, tapos pagcoconnect naman make sure airbag is connected, if not mag srs warning ka. anything na magcause ng vibration will contibute sa parts para magrattle, one of those is putting a bigger wheels

Tnx hopefully makaya ng powers ko pagbaklas nung steering wheel

[Seeyah14]

Sir zix anong number po ng thread yung DIY nyo na LED sa Steering wheel control? thanks

[zix888]

Sir zix anong number po ng thread yung DIY nyo na LED sa Steering wheel control? thanks

mas malakas nga intensity nung nilagay ko leds, hehe

[the_mechanic]

mas malakas nga intensity nung nilagay ko leds, hehe

nice yan sir zix, ordinary LED lang po ba ginagamit nyo dyan sa my window control panel (left side)...

[zix888]

nice yan sir zix, ordinary LED lang po ba ginagamit nyo dyan sa my window control panel (left side)...

yup, the cheapepay led lang, 16mos and still counting. ang buhay naman ng led eh nasa supply, basta hindi siya over supply, walang problema

[leinahtan]

yup, the cheapepay led lang, 16mos and still counting. ang buhay naman ng led eh nasa supply, basta hindi siya over supply, walang problema

is he referring to the window control panel or the audio control panel on the steering? Di ba audio controls yan zix?

[zix888]

is he referring to the window control panel or the audio control panel on the steering? Di ba audio controls yan zix?

yup it's my audio control.

window panel , also used same led

[leinahtan]

yup it's my audio control.

window panel , also used same led

aah ok. Nice zix.

[glenn_duke]

yup it's my audio control.

window panel , also used same led

Sir Zix, pwede kayang i convert yung window lock into a door lock. Para isang push lang ng button, lock na agad yung mga pinto?

[zix888]

Sir Zix, pwede kayang i convert yung window lock into a door lock. Para isang push lang ng button, lock na agad yung mga pinto?

yes sir pwedeng pwede, kaso sayang naman yung window lock. lagay na lang separate switch for that function

[glenn_duke]

yes sir pwedeng pwede, kaso sayang naman yung window lock. lagay na lang separate switch for that function

Sir saan pwedeng ilagay? okay kayang butasan yung tabi ng window lock at duon ilagay yung switch ng door lock?

[zix888]

Sir saan pwedeng ilagay? okay kayang butasan yung tabi ng window lock at duon ilagay yung switch ng door lock?

if i am going to do it, sa center console ko na lang ilalagay, at least madami pang blank spots, medyo crowded na sa window panel eh

[the_mechanic]

nice talaga sir zix yun mga diy mo. madali lang bang tanggalin yun window control panel kung sakaling maglagay din ako ng LED and do you provide any electronics part/or any circuit (ex. resistor ) para ma control yun supply ng voltage sa LED, which normally 12V output supply ng monty natin? TIA