2010 Mitsubishi Strada [continued 2]

[bimmer23]

Mga Sir, Baka may interested? Im selling my 2014 Montero Mags and tires
Mags 2014 New look already
Tires- Yokohama geolandar 265/65/r17
Brand new condition. Nagpalit agad kami pagkalabas pa lang ng Casa
Kindly call 09179716275- kaye

[lucas1023]

request lang po, post nama po kayo dito ng strada nyo na pina-change color nyo ng matte black or carbon fiber. kahit part lng ng mga body di whole. balak ko kasi pa iba paint nung door sa likod. ok ba yun? TIA

[trup]

Na experience nyo na ba na mag blink yung gear indicator then sabay loss of power? Parang naka fixed sa 3rd gear.... Nangyayari ito sa 2011 glx-v ko during traffic, going uphill/downhill

[StarDammam]

Guys, meron ba dito na nakakuha unit from Union Motor sa C5 pasig?

Sabi ko sa SA ko na tapos na ko mag finance sa STRADA ko, i asked her kung saan Branch ng BDO ko pwd makuha yung release ng chattel, sabi ng SA di daw niya alam....samantala sila nagpa approve ng loan

TIA

[altec]

Mitsubishi Motors Philippines announces Safety Inspection Campaign for L2 and Strada airbag inflators - Mitsubishi Motors Philippines Corporation

airbag recall on 2007 to 2014 models

[KCboy]

Mitsubishi Motors Philippines announces Safety Inspection Campaign for L2�� and Strada airbag inflators - Mitsubishi Motors Philippines Corporation

airbag recall on 2007 to 2014 models

anyone here already had their airbags serviced at the casa for the recall???

[HenryBraxton]

The Mitsubishi Pajero Mini has become my favorite kei car
So I started playing Gran Turismo 2 recently. My first race was between kei cars, and I saw a 2 door Mitsubishi Pajero. My first thought was "wtf is this doing in a kei car race". At the end of the race, I noticed that it wasn't a Pajero, no it's a Pajero mini.

[HenryBraxton]

Noob question lang -- nearing the 1,000 km mark and I am decided not to have my truck serviced at the place of purchase, Citimotors-Makati.

My plan is to go to any Diamond Shop -- free pa rin ang labor, right? I am slowly checking my Sevice Book, may nakalagay pala doon na free stubs --- free labor for the 1000km and 5000km PMs kaso may stamp pad siya na "Citimotors, Inc" --- None issue naman ito, diba? Just making it sure para I know what to expect of my decision not to go to Makati.

TIA.

The Mitsubishi Pajero Mini has become my favorite kei car
So I started playing Gran Turismo 2 recently. My first race was between kei cars, and I saw a 2 door Mitsubishi Pajero. My first thought was "wtf is this doing in a kei car race". At the end of the race, I noticed that it wasn't a Pajero, no it's a Pajero mini.

[HenryBraxton]

The Mitsubishi Pajero Mini has become my favorite kei carUC browser SHAREit Appvn So I started playing Gran Turismo 2 recently. My first race was between kei cars, and I saw a 2 door Mitsubishi Pajero. My first thought was "wtf is this doing in a kei car race". At the end of the race, I noticed that it wasn't a Pajero, no it's a Pajero mini.

guys any light on this issue??

[nieljuuuhn]

Saan po ang USB port ng Strada 2013? At yung saksakan ng SD Card.

[Neogie]

Hi mga bossing. Need some expert advise po sana. Yesterday ni replace yung remote locking system ng strada 2011 ko cause ngkaka issues na yung orig na remote at frequency. However, na notice ko after installation, nka on na always yung door open symbol sa dash? Nka off nmn yung dome light nya kpag nka close lahat ng doors at ng wowork nmn yung sensors for each door. Internal lighting issues po ba to? Thanks po in advance

[xldon2lx]

Hello mga boss! Baka po pwede patulong. Yung touchscreen kasi nang unit ko di na calibrated. Problema eh hindi ko na maaccess yung menu for calibration? May way ba para mareset or mainitiate yung recalibration option? Or something like factory reset gaya sa phone?

Hindi rin solution yung winterpine dahil nasa iloilo po ako. May nakita din ako dito file for OS update sa previous posts pero dead link na. Baka po may makatulong or may makasuggest. Techy naman po ako and magaling mangulikot so ok lang kahit advance na instructions.

Thank you po in advance!! 😊

[Avaris008]

the store is close to sogo hotel in banawe, same side as sogo. you can't miss it. also close to ling nam and teriyaki boy.

regarding paj ralliart mags. got to drop by this shop last week. meron nga sila! kaya lang used na. 18k for the set. thanks parin for the tip.

mukhang makakakuha na ako sa evangelista. sa wheelers. rota daw may gawa. meron sila on display black saka dark brown. pero makakapag padeliver daw sila next week ng original color, gray (na may pagka bronze). 23k wala pang tawad. ano sa tingin nyo dito? mag post ako ng pic pag nakita ko na.

tapos binalak ko nang tumingin ng pireli scorpion ATRs. kaya lang out of stock lahat sa evangelista. malakas daw benta, dahil magaling nga siguro. kelangan pa mag hanap ng ibang options para sa goma kung hindi magkakaroon in the near future.

[dBoss]

Ngayon ko lang na review ang mga threads for Strada. Sa SCV and the dirty fuel lang kasi ako nakatutok.

I would like to ask the ff since I am due na for a 1000km PMS:

a) How do you know if you have uneven stance? I will use a measuring tape? in case I saw an error, what is the acceptable error?? Initially "dangkal" lang a basis ko, I obeserved na mas mababa ang nasa driver side... this can easily be corrected naman sa casa, diba?

b) "ingay sa leaf spring" -- may narinig akong mahina, I asked my kid to go on top of the bed and yugyugin up and down may narinig ako sa driver's side, pag lagyan ko na rin sya ng silencer...

------ pag correct ng stance and pag lagay ng silencer is easy to correct di ba? this can be done in less than an hour??

c) Step board ko, saw pitting corrossion (tuldok na rust), it seems aluminum coated lang pala siya part kaya ito sa warranty? or may work-around through DIY?

TIA

[shakatak70]

Ngayon ko lang na review ang mga threads for Strada. Sa SCV and the dirty fuel lang kasi ako nakatutok.

I would like to ask the ff since I am due na for a 1000km PMS:

a) How do you know if you have uneven stance? I will use a measuring tape? in case I saw an error, what is the acceptable error?? Initially "dangkal" lang a basis ko, I obeserved na mas mababa ang nasa driver side... this can easily be corrected naman sa casa, diba?

Casa will measure it by tape (with OEM mags installed) this can be done in a very short time, just ask the SA to include the chewking of uneven stance. Acceptable error...I read it somewhere in this thread around 10-20 mm. Correcting the issue may depend on the gravity and availability of the defective parts. In my case, until now I'm still waiting for the parts to be replace. Leaf and coil spring have to be replace, dumating na yung isang parts and still waiting for the other to arrive.

b) "ingay sa leaf spring" -- may narinig akong mahina, I asked my kid to go on top of the bed and yugyugin up and down may narinig ako sa driver's side, pag lagyan ko na rin sya ng silencer...

------ pag correct ng stance and pag lagay ng silencer is easy to correct di ba? this can be done in less than an hour??

Regarding naman sa ingay ng leaf spring (the ek-ek sound) madali lang nilang remedyuhan yun. Repositioning lang (niluluwagan lang) ginagawa ng casa dun sa bolt na nasa leaf spring (aminado sila na di maganda yung quality ng plastic na nakakabit dun kaya umi-ingay). Mine also have some ek-ek sound before at noong nagpa-PMS ako ginawan ng paraan yun hanggang ngayon wala naman ingay.

c) Step board ko, saw pitting corrossion (tuldok na rust), it seems aluminum coated lang pala siya part kaya ito sa warranty? or may work-around through DIY??

TIA

di kaya may speck of metal na naiwan sa step board habang basa yung part na yun (contact of dissimilar material will cause corrosion)? Anyway, since I haven't experience this, baka pwede mo ipasok sa warranty kung maliit lang naman siya pwede mo na ipa- paki sa casa. Pero ang pagkakaalam ko yung step board natin ay aluminum.

[dBoss]

Casa will measure it by tape (with OEM mags installed) this can be done in a very short time, just ask the SA to include the chewking of uneven stance. Acceptable error...I read it somewhere in this thread around 10-20 mm. Correcting the issue may depend on the gravity and availability of the defective parts. In my case, until now I'm still waiting for the parts to be replace. Leaf and coil spring have to be replace, dumating na yung isang parts and still waiting for the other to arrive.



Regarding naman sa ingay ng leaf spring (the ek-ek sound) madali lang nilang remedyuhan yun. Repositioning lang (niluluwagan lang) ginagawa ng casa dun sa bolt na nasa leaf spring (aminado sila na di maganda yung quality ng plastic na nakakabit dun kaya umi-ingay). Mine also have some ek-ek sound before at noong nagpa-PMS ako ginawan ng paraan yun hanggang ngayon wala naman ingay.



di kaya may speck of metal na naiwan sa step board habang basa yung part na yun (contact of dissimilar material will cause corrosion)? Anyway, since I haven't experience this, baka pwede mo ipasok sa warranty kung maliit lang naman siya pwede mo na ipa- paki sa casa. Pero ang pagkakaalam ko yung step board natin ay aluminum.

Thanks answering my queries !!

On the uneven stance, the issue is on the rear part of the truck and not in the front?

On the stepboard - will check it again and take some pictures to have a better look..

[jim]

Hi everyone! I will be getting my GLX next month. I know there are a lot of quirks with regards to the vehicle but I realy love it and it is bang for the buck. I opted for the GLX as I do not need a 4x4 and wanted a manual tranny. No ABS/EBD I can live as my first vehicle was a Toyota Mini Cruiser. I only found ABS useful when I got my third car.

One question. Any feedback from Jabez in Dasmarinas Cavite? They have been quite welcoming and kind. You guys may have experiences with them. I just want to know.

Thanks!

[Bertobol]

Casa will measure it by tape (with OEM mags installed) this can be done in a very short time, just ask the SA to include the chewking of uneven stance. Acceptable error...I read it somewhere in this thread around 10-20 mm. Correcting the issue may depend on the gravity and availability of the defective parts. In my case, until now I'm still waiting for the parts to be replace. Leaf and coil spring have to be replace, dumating na yung isang parts and still waiting for the other to arrive.

bai shak, can you tell if uneven ang stance by plainly looking at your strada from a distance? can you also tell while youre riding on it?
just wondrin if mapansin ba ang uneven stance without having casa to check on it the proper way. kasi I for one might be driving around with uneven stance without knowing it.

plus:
will the uneven stance greatly affect our safety and the performance?
TIA

[dadz]

aba eh bago na pala ito nag start na ulit sa one and now nasa 3 na bravo.....................

[shakatak70]

bai shak, can you tell if uneven ang stance by plainly looking at your strada from a distance? can you also tell while youre riding on it?
just wondrin if mapansin ba ang uneven stance without having casa to check on it the proper way. kasi I for one might be driving around with uneven stance without knowing it.

plus:
will the uneven stance greatly affect our safety and the performance?
TIA

Yup bai Bert pansin na pansin... it's like this no..

Noong nakakabit yung Mamba pag nakaparada ako halatang-halta na naka-kiling siya sa side (driver side mas lower).

then noong pumunta ako ng Casa para ipacheck yung stance kasama ang ibang ipapacheck ko pa, ang sabi sa akin ng SA sir kasi nasa bottom ng driver side yung fuel tank. Baka puno or half yan...Kako 1/4 na nga lang laman niyan. Then iniwan ko pero after mga 10 minutes tinawagan ako at ipinakakabit yung OEM na mags.. In short naikabit ko at na check nila at confirm na may deperensya yung leaf at coil spring. Kako bakit ganun wala namna akong kinarga na mabibigat.

So samakatuwid nagka-igihan na papalitan pero antay lang kung kailan dadating yung parts.

Hanggang ngayon di ko ibinabalik pa yung mags bale OEM pa ang nakakabit at pag nakasakay ka ramdam mo na mas mababa yung sa driver side which pati si Mrs napansin din kasi minsan siya ang may dala ng unit. Lalo na kung tumatakbo ang unit natin at turning right yung curve parang babaliktad mas grabe yung tilt ng unit sa left. kaya kahit hindi sharp curve alalay lang ako (mas naramdaman ko ito noong hindi yung bagong mags ang nakakabit, siguro compensated yun ng lapad ng gulong siguro lang ha).