Tips Naman On RC cars

**kupaloids** · January 1st, 2003 12:28 PM

Originally Posted by pajerokid

kupaloids::: bibili na ako ng bulitas mamaya hehehe! ang dami pala nito! 22pcs na size 1150 tapos 6pcs na size 850 :D Anyway, alam kong sulit naman. My car ran for about 35 minutes last night! pare hindi stir ito! ewan ko, hindi kaya baka senglots lang ako hehehe :D[

Nyahaha! Baka naman sa iba mo ipakabit yung bulitas! Nyahaha! Pero daig ka ni Glennster bearing yung kanya! Nyahaha! NiMh ba ang gamit mong batts? Tagal nun a 35 mins.? Kung ganyan nga katagal ang inaabot bibili din ako ng ganyan kaya lang palit din ako ng charger :? But what the heck! Sulit naman diba!?

**mbt** · January 1st, 2003 02:07 PM

Originally Posted by pajerokid

oks talaga tong hobby na to ser boybi!!!! Nung bumili ako ng batt and charger kahapon, kasama ko dad ko. sabi ay "Ang mahal naman nyang laruan na yan" to which i responded "Hindi naman po laruan yan, pang matanda yan"........ later that day, i was testing the rc in the garage......... ang sabi "Pa-subok nga" .... hayun, more that 5 minutes naglaro. Kelangan ko pang agawin yung transmitter! gusto pang sumama sakin sa fort hehehe :D

[size=24]hahahahahahaaaaa! :lol: :lol: [/size]

aliw naman ng dad mo hahahaa :lol:

mukhang ok din yung e-maxx pero mas bagay sa boulder-crawling yung TXT-1. mas bagay sa baja 1000-style off-road racing yung e-maxx... kaso mas ok din kung hindi pre-assembled yung kit... bonding yung assembly nung R/C e hehehe :D

**splerdu** · January 1st, 2003 02:31 PM

some r/c videos

http://www.rccaraction.com/rz/cars/video.asp

**splerdu** · January 1st, 2003 02:33 PM

tamiya wild commando

http://www.tamiya.com/english/products/43503wild/wild.mpg

**chase** · January 1st, 2003 06:06 PM

PK...how much bili mo dun sa batt and charger?
tsaka magkano ba ang isang 540 na motor?
salamat! =)

**pajerokid** · January 1st, 2003 08:21 PM

kupaloids::: nag bonding session kami ni dad kanina sa fort (the best on road/ offroad rc place!!!! its free!!!! ). Aliw! Yung 3000mAh batt ko lasted exactly 28minutes. Mixed course, on road and offroad. Yung 30+ minutes sa garahe lang. Ang dami ngang nag stop na auto e! Pinanonood ako hehehe :D Syempre, pa-cute naman ako.... may chikas e :D By the way.... ang liit nung bearing hindi kasya sa ano ko ahehehehe :mrgreen::mrgreen::mrgreen::mrgreen: pang rc lang talaga!

mbt::: comedy talaga dad ko kahit nuon pa! :D BTW, I put a carbon fiber touring spoiler on the truck! heheheh muka na syang ricey honda! But seriously ang ganda ng effect! I'll put the ball bearings later hehehe! :D

chase::: the batt and charger were kinda expensive. pero sulit coz ang tagal ng runtime! 25+ minutes! :D 3000mAh NiMh Batt P2600. Yung charger P1600 (supposed to be connected to a car battery. luckily, i have an AC to 12V transformer).
Yung 540 motor anywhere from 700 to sky's the limit. Ang daming racing motor 30k+ rpm mga P2000 ata :D

Still, this is a cheaper hobby than offroading so ok na rin hehe :D

**mbt** · January 1st, 2003 08:37 PM

pajerokid,

28 minutes?? :shock: tagal a! yan ang ok na ok na run time... di ka bitin :D ok talaga pag iba-iba yung track/terrain na pinatatakbuhan mo... di ka magsasawa nun :D

problema lang sa R/C off-roading ang hiiiiiiirap linisin nung truck afterward... hehe o diba para talagang tunay na off-roading? :lol:

pics naman nung R/C in action hehehe :D

**pajerokid** · January 2nd, 2003 09:01 AM

mbt::: Yup! Solb na ako on a single batt! Its a good thing too coz mas hindi sasawaan :D Im almost done with the ball bearings kaya lang the lady from lils gave me a wrong sized one

Pareho external diameter but iba yung size nung butas.... gonna have it replaced in a few hours.

Cleaning isnt really a chore. My trick is to use an air compressor to blow off dust and grass :D Oh, and i sealed up the motor too :D

............haaaaaaaaaay, ang hirap maging adik! :wink:mbt::: Yup! Solb na ako on a single batt! Its a good thing too coz mas hindi sasawaan :D Im almost done with the ball bearings kaya lang the lady from lils gave me a wrong sized one

Pareho external diameter but iba yung size nung butas.... gonna have it replaced in a few hours.

Cleaning isnt really a chore. My trick is to use an air compressor to blow off dust and grass :D Oh, and i sealed up the motor too :D

............haaaaaaaaaay, ang hirap maging adik! :wink:

**kupaloids** · January 3rd, 2003 12:29 PM

Originally Posted by pajerokid

kupaloids::: nag bonding session kami ni dad kanina sa fort (the best on road/ offroad rc place!!!! its free!!!! ). Aliw! Yung 3000mAh batt ko lasted exactly 28minutes. Mixed course, on road and offroad. Yung 30+ minutes sa garahe lang. Ang dami ngang nag stop na auto e! Pinanonood ako hehehe :D Syempre, pa-cute naman ako.... may chikas e :D By the way.... ang liit nung bearing hindi kasya sa ano ko ahehehehe :mrgreen::mrgreen::mrgreen::mrgreen: pang rc lang talaga!

Hahaha! Mukang uubra nga yung sinasabi ni Glennster na bearing ang ilalagay nya at di bulitas!!! :lol: Yan na nga ba sinasabi ko e dpat tlga bli din ako ng offroad car/truck prolly by June dting na E-Stampede ko Yoohoo! More offraod capabilities!!! Hehehe! wag k muna magsasawa at karera tayo!!

Reminder lang, ALWAYS let the battery to completely cool down before recharging to avoid damaging the cells. :wink:

mbt: Bili kn din ng TXT-1!!!

**pajerokid** · January 3rd, 2003 01:48 PM

kupaloids::: Bulitas, ahehehe! Pare ok talaga sa FORT mag practice! Sobrang luwang! Tama pare, get an offroad truck! Mas masaya ito IMHO kesa sa on-road car. Besides, slick tire lang katapat nyan, pwede na rin sa on road :D Kahapon, gelpren ko naman kasama ko! PUCHA! sampung beses yata itinaob yung truck! :D Nalilito sya kasi sa controller lalo na pag nakaharap yung rc sa iyo (opposite diba?).

Sabi ko hindi ako mag ho-hop up. pero naka full bearings na ako, rear stabilizer bar, carbon fiber spoiler, motor heat sink, carbon fiber damper stay AT Universal joints (pucha mahal!) :D

Pare, mag balik-bayan ka na ng maaga! walang kalaro si PK :D

mbt::: pare i have a video of the rc in action kaya lang mga 3MB

if you like, you can pm me you email, send ko sayo. The action pics are somewhat disappointing kasi.

**kupaloids** · January 3rd, 2003 02:35 PM

pajerokid, Ayos a! Di pala mag hohop-up ha! Tingnan natin in the near future pa. Ganyan din dialouge ko dati pero ngayon ang laki na din ng nagastos ko sa RC ko. Magkano bili mo sa Heat Sink? I'm assuming yung Tamiya Blue heat sink nabili mo. Wala pa kasi ako nun e. Pre baka pwedemo din send video mo sa email ko?... naku baka di kumasya. I'll PM you my other email add. ok!?

**pajerokid** · January 3rd, 2003 04:40 PM

heto mga updated pics. mainit pa galing sa kamera :D

The tamiya heat sink costs 275. anodized aluminum. effective :D i think kasya sa lahat ng 540 engine :D By the way, ginamit ko ay TL01 universal joints. SUlit talaga tong joint! tahimik! Pareng kupaloids, ok ba yung spoiler ko? :D

**kimpOy** · January 3rd, 2003 04:46 PM

galing naman PK!
dalhin mo dito kapag nag lahar trail tayo ulit!

**chase** · January 3rd, 2003 07:50 PM

guys,
help naman...what does this mean:

6 AMP REGULATED POWER SUPPLY

thanx!

**splerdu** · January 3rd, 2003 08:35 PM

super sulit yung txt-1 na yun! sobrang mura, tapos upgraded na yung motors at esc.

ako hindi maka-upgrade ng motor kasi ipon pa para sa esc. hindi kasi pwedeng basta-basta dahil dalawang motor yung gamit ng txt-1, the lower end esc's can't take the load.

may nagbebenta din ng anodized aluminum skidplates + gearbox cover para sa txt-1. based sila from the states, but can ship overseas. quite expensive, but the pictures of the merchandise speaks volumes. the screwholes are countersunk and the plate itself is formed from a plant that normally does aviation parts.

**pajerokid** · January 3rd, 2003 08:48 PM

splerdu::: yung anodized aluminum parts cost around 20+ USD per component set diba? nakita ko nga yon sa net (forgot the company who manufactures them) ganda! and definitely matibay. expensive tho.

chase::: yun siguro yung magbibigay ng power sa charger. Any 220v-12v Step Down transformer (adaptor) should do. Yung charger ko was supposed to be getting its power from a 12v car battery, good thing nga meron akong power supply. My charger is an LRP unit. From what i read in the rc forum, medyo ok tong brand na ito, although low end charger lang meron ako :D

kimps::: mas ok sa lahar yung de-nitro na rc! yung sakin baka bumaon lang sa sand :D liit ng gulong e. Kakabitan ko nga ng grandtrek at2 hehehe :D Nakita mo ba pre yung gulong ng rc ko ngayon? BF Goodrich MTs!

**mbt** · January 3rd, 2003 09:16 PM

pajerokid,

oks lang yun... upload mo nalang sa pbase yung pics mo hehehe :D

kupaloids,

ipon-ipon muna hehe :wink:

**pajerokid** · January 4th, 2003 01:12 AM

djerms:::

taken from rctech.net

TAO4 Pro (all hop-ups included, with 2 xtra used body) w/ Futaba Megatech Jr. also includes one receiver with crystal & 1 servo. All in mint condition - P9.8K

*PRICES ARE NEGOTIABLE*

***PLEASE PM OR TEXT ME***

--------------------------------------------------------------------------------
My Cell no. 0917-8342905

**kupaloids** · January 4th, 2003 12:24 PM

pajerokid, Ok yung rear spoiler mo a! San ang byahe nyan, direct flight ba yan? Nyahaha! Dapat magaganda stewardess nyan! Pero ok yung shocks mo a! Oil filled pa! Yung sakin nga friction type parin. Mura lang pala ng heat sink sa pinas, buti nalang di pa ako bumibili sa ebay. Naka stabilized ka pa pala! Although IMO I wouldn't suggest installing a stabilized for offroad truck kasi it will restrict articulation, pero ok yan pag nasa tarmac. Sana may offroad trail ulit sa Pampanga tapos ddlin ko yung E-Stampede ko :D yun nga lang makiki hitch ako papuntang dun, :mrgreen:

**splerdu** · January 4th, 2003 02:51 PM

depende sa design ata. sa txt-1 maganda na nakakabit yung stabilizers, pero yung TL01 medyo maliit yung suspension stroke. mukha namang pang raid-rally tung truck ni pajerokid so ayos na siguro yun.

The Largest Car Forum in the Philippines

Tips Naman On RC cars

Thread Tools

Search Thread

Display