Cheap and Good Quality Grass Cutters

[Athrunzala]

Can you recommend what are the good in quality and cheap grass cutters in the market now?

[12vdc]

Can you recommend what are the good in quality and cheap grass cutters in the market now?

Kawasaki TD40.

I have 2 in the farm, plenty of parts

[monty_GTV]

i have the kawasaki, keyang and honda brands sa farm. pinaka-durable yung kawasaki though hindi ko kabisado mga modelo nila. presyo nasa range 7k-14k

Sent from my SM-G960F using Tapatalk

[_Cathy_]

Kawasaki TD40.

I have 2 in the farm, plenty of parts

Samin ang bilis masira ng string.Though mabato kasi garden namin.

Sent from my SM-N960F using Tapatalk

[yebo]

I have a kawasaki td40 also. Matibay naman pero syempre need din ng ingat ng gumagamit. I had to replace the shaft and gear when my farm hand accidentally struck the blade on a tree.

Wait. Grass or brush? Pang garden lang ba?

[Lew_Alcindor]

real Kawazaki TD40 (sometime under the KAAZ name), Hondas and Stihl will set you back at least 14K.

imitations, generic chinese, and non-popular brands (etc Hoyoma) is priced from 5K to 7K.

I'm cheap so I'm planning to get the cheaper ones. I'll probably use it once every 2 months lang for a 500 sq. meter lawn.

FB marketplace is a good start in looking for brush cutters.

[Athrunzala]

Wait. Grass or brush? Pang garden lang ba?

Pareho lang naman iyon di ba, depende lang yata kung aling country ang ginagamit na namecall for the "weed eater or trim rimmer" like in US

[Athrunzala]

Kawasaki TD40.

I have 2 in the farm, plenty of parts

maganda kasi sa TD40 dami spare parts available, pero yung CG411 mas mura sa TD40 pero di pa yata gaano karami ang spare parts

[Athrunzala]

imitations, generic chinese, and non-popular brands (etc Hoyoma) is priced from 5K to 7K.

I'm cheap so I'm planning to get the cheaper ones. I'll probably use it once every 2 months lang for a 500 sq. meter lawn.

FB marketplace is a good start in looking for brush cutters.

pahingi naman ng url or weblink ng FB marketplace for brush cutters. Thanks!

[yebo]

Pareho lang naman iyon di ba, depende lang yata kung aling country ang ginagamit na namecall for the "weed eater or trim rimmer" like in US

No, not same. Brush cutters use a metal blade. Grass cutters use a nylon or synthetic sling, like what maam cathy mentioned in her post. Some use a small chain but modified na.

[12vdc]

pahingi naman ng url or weblink ng FB marketplace for brush cutters. Thanks!

Brush and Grass cutters are the same. They have the standard spindle that fits steel blades of different size nd shapes. The string or nylon have a steel plate adapter, also sometime called Black Cutter. You may even buy replacement nylon strings from fishing supply.

Lubrication comes directly to the 2T oil(2-stroke engine) on the gaso tank so make sure to use the proper ratio. I have overhauled it, replaced the centrifugal clutch, replaced broken Kaaz handle, throttle body, recoil starter. At one time engine caught fire because the operator forgot to replace the gas cap and it leaked into the spark plug. I just replaced the burnt parts and its back to operation. Parang ito yata ang indestructible version sa brush cutters and mine is over 10yo maintaning the haus, the farms.

If you are near Manila, visit the hardware shops at T.Alonzo. my reco shop is Best Achiever's 733-0783, 0787, 0974, 5313. They give discounts.

[Athrunzala]

No, not same. Brush cutters use a metal blade. Grass cutters use a nylon or synthetic sling, like what maam cathy mentioned in her post. Some use a small chain but modified na.

oic, brush cutter talaga what I mean, nasanay na kasi sa term na grass cutter ang mga pinoy eh

[Athrunzala]

Brush and Grass cutters are the same. They have the standard spindle that fits steel blades of different size nd shapes. The string or nylon have a steel plate adapter, also sometime called Black Cutter. You may even buy replacement nylon strings from fishing supply.

Lubrication comes directly to the 2T oil(2-stroke engine) on the gaso tank so make sure to use the proper ratio. I have overhauled it, replaced the centrifugal clutch, replaced broken Kaaz handle, throttle body, recoil starter. At one time engine caught fire because the operator forgot to replace the gas cap and it leaked into the spark plug. I just replaced the burnt parts and its back to operation. Parang ito yata ang indestructible version sa brush cutters and mine is over 10yo maintaning the haus, the farms.

If you are near Manila, visit the hardware shops at T.Alonzo. my reco shop is Best Achiever's 733-0783, 0787, 0974, 5313. They give discounts.

Gusto ko sana yung mga below 6,000 pesos na good quality naman , Salamat Boss 12vdc.
Papapaano po kayo natututong magfix ng grass cutter bossing? Through self-taught lang po o may nagturo sa inyo?

[12vdc]

Gusto ko sana yung mga below 6,000 pesos na good quality naman , Salamat Boss 12vdc.
Papapaano po kayo natututong magfix ng grass cutter bossing? Through self-taught lang po o may nagturo sa inyo?

Jas col me pareng dose for short.

I'm an engineer by profession, a farmer by practice,a corporate slave in the morning, a Mr know-it-all, jack of all trades master of none

Seriously, since grade school tinkering things is my hobby, i create my Toys(i dont buy), i learned how to repair machines by destroying them. Since i grew in the farm, farm machines were everywhere and i get used to helping our mechanics. At HS i changed the bore of a Honda motor, changed the clutch, and all sorties. I'm the repairman of the family and my garage is full of junk for salvaging.

Try mo call si BestAchievers may China brands din sila.

[monty_GTV]

Brush and Grass cutters are the same. They have the standard spindle that fits steel blades of different size nd shapes. The string or nylon have a steel plate adapter, also sometime called Black Cutter. You may even buy replacement nylon strings from fishing supply.

Lubrication comes directly to the 2T oil(2-stroke engine) on the gaso tank so make sure to use the proper ratio....

yeah, pareho lang din sa akin. you can fit blades or strings depende sa application. the strings meron na mga pre-cut sa diy o sa ace or you can buy yung naka-roll.

i have both 2-stroke and the 4-stroke types. you mix oil sa 2-stroke fuel tanks, whilst the 4-stroke may separate oil port.

Sent from my SM-G960F using Tapatalk

[Athrunzala]

Jas col me pareng dose for short.

I'm an engineer by profession, a farmer by practice,a corporate slave in the morning, a Mr know-it-all, jack of all trades master of none

Seriously, since grade school tinkering things is my hobby, i create my Toys(i dont buy), i learned how to repair machines by destroying them. Since i grew in the farm, farm machines were everywhere and i get used to helping our mechanics. At HS i changed the bore of a Honda motor, changed the clutch, and all sorties. I'm the repairman of the family and my garage is full of junk for salvaging.

Try mo call si BestAchievers may China brands din sila.

Galing mo pareng dose!

- - - - - - - - - - - - - - - - - - - - - -

Okay ba ang Hoyoma Grass cutter TD40? Matibay ba ito kasi mura lang siya eh

[12vdc]

^Lol

Narinig konarin yan brand parang may partner na pressure washer yan. Ask mo din si BestA, magaling sila mag payo at experienced sila kung ano maganda at matibay na recommend. Kung light duty baka oks na.

I use metal blades sa hard overgrowth grass like yun sa beach farm-weeds are like shrubs(we call it marambong o masukal), the ordinary nylon simply won't do the job. Also cogon grass, ubos kaagad ang nylon. Delikado lang sa metal blades yun rocks that becomes projectiles, malas ng tatamaan.

[12vdc]

Ano kaya say ni pareng Kags dito sa 2stroke motors, mas mabantot sa diesel at nakaka irita ang tunog like a dying animal.

2-strokes being said has more torque than 4-strokers but thyre noisier and emits smoke because of oil burned.

DENR may limit the use of sorts for small farm machinery but sa province you could still see lots of tricy using this engines.

[joaquim]

I have stihl grass cutter, wala usok, hindi maingay at sabi ng gumagamit mas magaan at wala masyado vibration compare sa kawasaki td40.
Ginamitan ko ng 2t ng stihl yung kawasaki hindi na rin mausok at nabawasan yung ingay nya.


Sent from my SM-G965F using Tapatalk

[12vdc]

^May kamahalan naman pyesa ng stihl. Iba nga 2Toil kulay orange.

Kung chainsaw ang topic yan reco ko against husky.