Bakit ka badtrip today?

[badkuk]

people who turn drinking fountains into their personal sinks, and people who don't properly clean sinks for that matter, should be made to lick it dry.


Kung pumorma akala mo kung sinong magaling...ambababoy naman ng ugali.

[RaGa]

Woke-up around 3:30 am with a very upset stomach and eventually leading to LBM
Wala naman ako kinain na unusual, alimuom siguro ito nung naglinis ako oto

[yebo]

fell asleep maybe 3am. then woke up from a half-sleep state maybe 20 times. finally fell asleep again as the sun was rising only to be waken up by my wife at 8am. i'm gonna be a zombie the whole day.

[_Cathy_]

I'm supposed to be working from home today, but because of a person who submitted crap reports, I had to go to work to fix his crap as I need 2 machines (PC+Laptop+extended monitor) for it!

Unfreakingbelievable when people don't give a sh1t about the quality of their work. He has no effort at all to fix it inspite of my VP sending an email to his boss about the quality of his reports

On the bright side, ang sarap mag drive today.

[BlancNoir]

I'm supposed to be working from home today, but because of a person who submitted crap reports, I had to go to work to fix his crap as I need 2 machines (PC+Laptop+extended monitor) for it!

Unfreakingbelievable when people don't give a sh1t about the quality of their work. He has no effort at all to fix it inspite of my VP sending an email to his boss about the quality of his reports

On the bright side, ang sarap mag drive today.

How did they even pass the eval period? Hahaha

Yes! Sabi nga daw mejo maluwag kalsada ngayon. I miss driving.

Sent from my SM-G930F using Tapatalk

[_Cathy_]

If it weren't for my German boss not wanting "gulo", hayaan ko pumutok report nito e I'm so mad at the lack of shame in the quality of work of this person. Also, he comes from a religion na known for being tamad!

[BlancNoir]

If it weren't for my German boss not wanting "gulo", hayaan ko pumutok report nito e I'm so mad at the lack of shame in the quality of this person. Also, he comes from a race na known for being tamad!

Kastila? Haha siesta? Lol

Sent from my SM-G930F using Tapatalk

[_Cathy_]

How did they even pass the eval period? Hahaha

Yes! Sabi nga daw mejo maluwag kalsada ngayon. I miss driving.

Sent from my SM-G930F using Tapatalk

Back up/reliever lang siya, yung totoo na gumagawa ng report naka maternity leave. He used to do the reports pero hindi ata sila nag turn over kasi assumption nila hindi na kailangan, e ang dami ng nagbago from years ago, pati system iba na. Boss ata siya ng totoong gumagawa ng report. Tinuro ko naman how the new system works pero parang ayaw na niya matutunan

[_Cathy_]

Kastila? Haha siesta? Lol

Sent from my SM-G930F using Tapatalk

Religion pala. Masipag mga Espanol compared dito. haha.

[BlancNoir]

Religion pala. Masipag mga Espanol compared dito. haha.

No idea na. Tamad na religion? Hahaha

Sent from my SM-G930F using Tapatalk

[BratPAQ]

Anybody know how to change fuse on fuse box like this. We have no lights on 1et floor but there is electricity on power outlets. We also have lights and power on outlets at 2nd floor.

I tried flipping each one but can't find the one for lights.

I don't know which fuse is busted or where the fuse are located. Bad trip [emoji17]

Sent from my SM-G955F using Tapatalk

[12vdc]

Anybody know how to change fuse on fuse box like this. We have no lights on 1et floor but there is electricity on power outlets. We also have lights and power on outlets at 2nd floor.

I tried flipping each one but can't find the one for lights.

I don't know which fuse is busted or where the fuse are located. Bad trip [emoji17]

Sent from my SM-G955F using Tapatalk

That fuse is designed to be "resettable" hence you call it circuit breaker. They seldom fail all you got to do is turn it off then back to on position to reset it.

There are "plug-in" and "bolt-on" type circuit breaker, you need to dismantle the front cover to identify the type.

I'm guessing the lower right breakers with 15A marks are for lightning, give it a try to reset since the 2-pole handles are missing could be just a tripped 1st pole.

[12vdc]

I Woke up to a text saying that my order from lazada has been cancelled because the seller ran out-of-stock of the product i salivated for. I guess their bday sale was too good to be true in my case [emoji22]

I was looking forward to playing w/ that dremel rotary tool pa naman

do what you gotta do so you can do what you wanna do

Try B&D RTX-B its the same thing but parts are more serviceable.

I don't like Dremel as the simple parts like collet and cutting discs are hard to find.

If you have broken power tools, you could swap them 40%off from selected Handyman/ True value.

[yebo]

Anybody know how to change fuse on fuse box like this. We have no lights on 1et floor but there is electricity on power outlets. We also have lights and power on outlets at 2nd floor.

I tried flipping each one but can't find the one for lights.

I don't know which fuse is busted or where the fuse are located. Bad trip [emoji17]

Sent from my SM-G955F using Tapatalk

nirereset lang yan bossing. flip the levers all the way to the off position (to outside) the flip then to pn position (to center). malalaman mo kung alin ang nag-trip be ause that will be the one whose lever springs back to middle position (between on and off position). minsan nasisira din yan, ayaw mag-reset, in which case need palitan.

[cast_no_shadow]

Ordered 4 cheese whopper, after they assembled the sandwich salpak sa microwave to heat.

I really miss Charlies.


Sent from my iPhone using Tapatalk

[BratPAQ]

nirereset lang yan bossing. flip the levers all the way to the off position (to outside) the flip then to pn position (to center). malalaman mo kung alin ang nag-trip be ause that will be the one whose lever springs back to middle position (between on and off position). minsan nasisira din yan, ayaw mag-reset, in which case need palitan.

That fuse is designed to be "resettable" hence you call it circuit breaker. They seldom fail all you got to do is turn it off then back to on position to reset it.

There are "plug-in" and "bolt-on" type circuit breaker, you need to dismantle the front cover to identify the type.

I'm guessing the lower right breakers with 15A marks are for lightning, give it a try to reset since the 2-pole handles are missing could be just a tripped 1st pole.

Thanks for the tips. ☺

Sent from my SM-G955F using Tapatalk

[brushless]

Don't forget to wear rubberized gloves when handling electricity.

[ninjababez]

Bad trip naiwan ko susi and cell sa loob ng bahay. "Sinira" ko weld ng padlock sa chain, and dapat tahimik dahil 3:30am nangyari. Buti nalang madami akong pwede idugtong para gawin panungkit [emoji44]
Napa welding pa tuloy ako ng wala sa oras LOL

Sent from my SM-C900F using Tapatalk

[sean-archer]

Bad trip naiwan ko susi and cell sa loob ng bahay. "Sinira" ko weld ng padlock sa chain, and dapat tahimik dahil 3:30am nangyari. Buti nalang madami akong pwede idugtong para gawin panungkit [emoji44]
Napa welding pa tuloy ako ng wala sa oras LOL

Sent from my SM-C900F using Tapatalk

Naku sir, easily nakapasok ka. Panu pa yung mga akyat bahay?

Sent from my SM-G935F using Tapatalk

[ninjababez]

Naku sir, easily nakapasok ka. Panu pa yung mga akyat bahay?

Sent from my SM-G935F using Tapatalk

Alam ko kasi weak point bro since ako din nag weld noon.
Tsaka kung may papasok doon, bolt cutter lang pasok kana eh (like most locks).

Sent from my SM-C900F using Tapatalk