Mazda B-Series (B2200/B2500)

[bsdguy]

*duskylim Thank you for welcoming me mga sirs. will try to hunt for surplus this weekend. need to add a little speed on it though adding turbo can also help pero baka mabilis akong ma OH, tama ba sir? or adding turbo can keep my engine cool? Kasi napansin ko na if my speed is around 100-110 kmh with A/C is on tumataas ang temperature ko! i used petron coolant also and have additional aux fan installed.

*azzkkr2600 Nice engine you have sir! in 2.6L what is the ratio?

[bsdguy]

*duskylim Thank you for welcoming me mga sirs. will try to hunt for surplus this weekend. need to add a little speed on it though adding turbo can also help pero baka mabilis akong ma OH, tama ba sir? or adding turbo can keep my engine cool? Kasi napansin ko na if my speed is around 100-110 kmh with A/C is on tumataas ang temperature ko! i used petron coolant also and have additional aux fan installed.

*azzkkr2600 Nice engine you have sir! in 2.6L what is the ratio?

[azzkkr2600]

*duskylim Thank you for welcoming me mga sirs. will try to hunt for surplus this weekend. need to add a little speed on it though adding turbo can also help pero baka mabilis akong ma OH, tama ba sir? or adding turbo can keep my engine cool? Kasi napansin ko na if my speed is around 100-110 kmh with A/C is on tumataas ang temperature ko! i used petron coolant also and have additional aux fan installed.

*azzkkr2600 Nice engine you have sir! in 2.6L what is the ratio?

*bsdguy: sir, it's better to replace your engine with an orig turboed engine [rather than putting turbo on your current one].

adding a turbo may make your engine hotter. it's forced induction..

higher temp on 100kph? check your radiator. it may already need servicing [overhaul]. replace fluids with distilled water + your fave coolant.

2.6L? it's a 12-valve gas engine i.e. 3 valves per cylinder.. US version po.

[bsdguy]

*bsdguy: sir, it's better to replace your engine with an orig turboed engine [rather than putting turbo on your current one].

adding a turbo may make your engine hotter. it's forced induction..

higher temp on 100kph? check your radiator. it may already need servicing [overhaul]. replace fluids with distilled water + your fave coolant.

2.6L? it's a 12-valve gas engine i.e. 3 valves per cylinder.. US version po.

What i mean on high temp is 50% nang gauge ko :D medyo paranoid na ako kasi sa temp eh kasi last year(Q1) na OH ako kasi ung sabi sa gauge is 50% lg, pero tumirik ung sasakyan ko un pala wala nang tubig my sira pala radiator ko, pinalitan lg nang cylinder head gasket and re-phased ang cylinder head then pinalitan ko rin ang temperature sender.. So far ok na man sya pero un lg old lady driving lg muna :D

[azzkkr2600]

What i mean on high temp is 50% nang gauge ko :D medyo paranoid na ako kasi sa temp eh kasi last year(Q1) na OH ako kasi ung sabi sa gauge is 50% lang, pero tumirik ung sasakyan ko un pala wala nang tubig my sira pala radiator ko, pinalitan lang ng cylinder head gasket and refaced ang cylinder head then pinalitan ko rin ang temperature sender.. So far ok na man sya pero un old lady driving lang muna :D

most of the time the culprit is the radiator and/or worn out cylinder head gasket. gawin mo e every 6months ka magpalit ng fluid i.e. distilled water + coolant. fill it with 1-2L of distilled water first, then pour a bottle of coolant, then distilled water uli.

[jawozabala]

hello po mga sir! bago lang po ako dito, meron po kami mazda B2200. gusto ko po sanang i restore. ask ko lng po sana kung saan meron bilihan ng mga parts and accessories like yung pang ilalalim mo mga bushing, tie rod, etc. saka po taillights, parklight, side mirror etc. taga bataan po kasi ako para po pagluwas jan sa manila alam na po kung saan pupunta. thank you po mga sir.

[life2enjoi]

tol 6500 singil sakin sa timing belt change 6500. ang mahal pala


tapos list ko sa mga ginawa mamaya..

[life2enjoi]

jawozabala - welcome sa forum sir dme ntn matutunan sa mga guru dto!

ako kelangan ko pala ng caliber clip at ng center console at mga siding ng pinto san kaya pwede makakuha

[bsdguy]

Thank you mga sir especially azzkkr2600! suggestions are greatly appreciated and very helpful lalo na sa luma kung engine :D

[duskylim]

Dear jawozabala:

Welcome to our humble thread!

Always nice to get to know new Mazda fans!

Please feel free to ask about your pickup's issues and problems.

life2enjoi -

Php 6500 at timing belt lang ang ginawa - that's highway robbery!

I will be interested in the bill you post - sobra talaga!

bsdguy -

If you want to try an inexpensive and slow method of flushing your radiator, try draining it of 2-3 liters every weekend and refilling with Absolute distilled water.

That will clean out your engine in about 1/2 years time.

Best Regards,

Dusky Lim

P.S.

Ronn: Kelan ang next EB?

[life2enjoi]

Mga sir,

Shell station: almanza laspinas

Repair fee:

change oil - 250
change gear oil - 200
repair fuel filter - 150
repair brake pads - 250
repair fan belt - 300
clean rear brakes - 200
-----------------------------------TOTAL 1350

Parts:
bendex brakpad - 1150
4 liters castrol CRB green 15w 40 - 720
2 liters castrol CRB green 15w 40 - 370
oil filter - 550
fuel filter - 780
fan belt - 350
ac belt - 300
gear oil - 1000
mufflet support - 200
-----------------------------------TOTAL 5450


ang sa timing belt nmn nde ko pinagawa kse nga eto singil sakin.

quotation:
labor - 1500
tming belt - 3250
brng -1020 -------------> nde ko maintindihan sulat nya kse. ano kaya to?
oil seal - 250
NDE KO ALAM - 350
gas - 100
-----------------------------------TOTAL 6470

sa aircon nmn.
cleaninf freon - 1500
exp. valve - 1600
f. drier - 750
flushing chemicals - 350
surplus blower - 2300
-----------------------------------TOTAL 6500

[life2enjoi]

Sir center console nalang at mga original na door panel a caliber clip yan ang mga hinahanap ko ngyn san kaya meron

[azzkkr2600]

Dear jawozabala:

Welcome to our humble thread!

Always nice to get to know new Mazda fans!

Please feel free to ask about your pickup's issues and problems.

life2enjoi -

Php 6500 at timing belt lang ang ginawa - that's highway robbery!

I will be interested in the bill you post - sobra talaga!

bsdguy -

If you want to try an inexpensive and slow method of flushing your radiator, try draining it of 2-3 liters every weekend and refilling with Absolute distilled water.

That will clean out your engine in about 1/2 years time.

Best Regards,

Dusky Lim

P.S.

Ronn: Kelan ang next EB?

kelan nga ba EB mga sirs? vote na kayo!

[azzkkr2600]

hello po mga sir! bago lang po ako dito, meron po kami mazda B2200. gusto ko po sanang i restore. ask ko lng po sana kung saan meron bilihan ng mga parts and accessories like yung pang ilalalim mo mga bushing, tie rod, etc. saka po taillights, parklight, side mirror etc. taga bataan po kasi ako para po pagluwas jan sa manila alam na po kung saan pupunta. thank you po mga sir.

good day sir jawozabala! dami mazda parts sa banawe, qc.. orig/OEM parts ba kukunin mo? prep ka mga P10T up for the parts you need.

we're also planning for another EB sama ka sir.

please post photos of your ride!

[binder_clips]

to life2enjoi, bsdguy,jawosabala : welcome to our humble thread hope to see you at the EB

to all mini truckers: when is your preferred date of EB

a) April 30, sat
b) May 1, Sun
c) other dates

also suggest the location..

pls take note that the Pacquiao v Lostley (Mosley) fight is on May 8, sunday

keep on trukin'

[azzkkr2600]

Mga sir,

Shell station: almanza laspinas

Repair fee:

change oil - 250
change gear oil - 200
repair fuel filter - 150
repair brake pads - 250
repair fan belt - 300
clean rear brakes - 200
-----------------------------------TOTAL 1350

Parts:
bendix brakepads - 1150
4 liters castrol CRB green 15w 40 - 720
2 liters castrol CRB green 15w 40 - 370
oil filter - 550
fuel filter - 780
fan belt - 350
ac belt - 300
gear oil - 1000
muffler support - 200
-----------------------------------TOTAL 5450


ang sa timing belt naman hinde ko pinagawa kase nga eto singil sakin.

quotation:
labor - 1500
tming belt - 3250
brng -1020 -------------> nde ko maintindihan sulat nya kse. ano kaya to?
oil seal - 250
DI KO ALAM - 350
gas - 100
-----------------------------------TOTAL 6470

sa aircon naman..
cleaning/freon - 1500
expansion valve - 1600
drier - 750
flushing chemicals - 350
surplus blower - 2300
-----------------------------------TOTAL 6500

sir mahal yun sa timing belt ah. buy ka ng OEM timing belt at tensioner sa autorama sa banawe. mahal masyado ang quote sayo pati na ang labor. may friend tayo jan sa las pinas area.. paging csi28...

follow regular maintenance sched ng mazda mo sir. usually, ang oil change is every 5000km or 5months whichever comes first. pero, old engine na mga mazda natin so recommended ko is around 3000km or 3months whichever comes first..

yun transmission oil at rear axle/gear oil palit ka naman every year or every 2 years. depende na kung nailusong mo sa baha ~ palit agad yan.

[jawozabala]

good day sir jawozabala! dami mazda parts sa banawe, qc.. orig/OEM parts ba kukunin mo? prep ka mga P10T up for the parts you need.

we're also planning for another EB sama ka sir.

please post photos of your ride!

Thank you po sir.. kung ano po mas maganda at matibay yung kukunin, halos lahat po ng pang ilalim suspension sa harapan po kelangan palitan.. matagal po kasi hindi nagamit yung b2200 mga 3 years. pero nag estimate pa po ako kung magkano aabutin kung papagandahin, kasi po lahat gagawin.. body work, paint work, detailing, suspension.. ska po interior (door sidings, carpet, upuan) yung makina po mi tagas langis pero hindi blowby kaya papaayos lang po gasket kaso palit na po ng makina, 4d55 po naka lagay pang L300 po yata. so nag iisip pa po ako mabuti kung itutuloy ko, kasi po estimate pa lng po sa Body work, paint work saka detailing kasama na po yung pa gasket nasa 60k na po. wala pa po yung suspension mga ilaw, tail light saka aircon pa po, paparehistro pa.. kung aabutin po siguro ng 100k mahigit, baka po kasi sumakit ulo ko.. baka mahirap mag hanap ng parts and accessories tulad po ng mga goma sa pinto window weather strip po ba tawag doon? kaya iniisip ko pa po ng mabuti, baka po mapasubo sa gastos tapos hndi din po ako masayahan sa huli e baka benta ko na lng po ng as in.. hindi pa din po kasi ako ganun ka desidido.. ano po suggest niyo mga sir? salamat po..

[azzkkr2600]

Thank you po sir.. kung ano po mas maganda at matibay yung kukunin, halos lahat po ng pang ilalim suspension sa harapan po kelangan palitan.. matagal po kasi hindi nagamit yung b2200 mga 3 years. pero nag estimate pa po ako kung magkano aabutin kung papagandahin, kasi po lahat gagawin.. body work, paint work, detailing, suspension.. ska po interior (door sidings, carpet, upuan) yung makina po mi tagas langis pero hindi blowby kaya papaayos lang po gasket kaso palit na po ng makina, 4d55 po naka lagay pang L300 po yata. so nag iisip pa po ako mabuti kung itutuloy ko, kasi po estimate pa lng po sa Body work, paint work saka detailing kasama na po yung pa gasket nasa 60k na po. wala pa po yung suspension mga ilaw, tail light saka aircon pa po, paparehistro pa.. kung aabutin po siguro ng 100k mahigit, baka po kasi sumakit ulo ko.. baka mahirap mag hanap ng parts and accessories tulad po ng mga goma sa pinto window weather strip po ba tawag doon? kaya iniisip ko pa po ng mabuti, baka po mapasubo sa gastos tapos hndi din po ako masayahan sa huli e baka benta ko na lng po ng as in.. hindi pa din po kasi ako ganun ka desidido.. ano po suggest niyo mga sir? salamat po..

4D56 engine? post some exterior, interior, engine photos sir so we can tell if the budget will be over a hundred thousand.

[life2enjoi]

azzkkr2600 - salamat sir. ako rin kelangan ko ng mga goma sa pinto at mga sidings ng pinto at un mga goma sa window san kaya makakabili nun? tsaka caliber clip sa brakepad san kaya?

sir willing ko namn dalhin kung san meron murang magpagawa at magaling at kabisado mazda!

[azzkkr2600]

azzkkr2600 - salamat sir. ako rin kelangan ko ng mga goma sa pinto at mga sidings ng pinto at un mga goma sa window san kaya makakabili nun? tsaka caliper clip sa brakepad san kaya?

sir willing ko naman dalhin kung san meron murang magpagawa at magaling at kabisado mazda!

meron available door weatherstripping and glass run channel sir. avail yan sa autorama, mazford, fordland sa banawe.

caliper clip / shims? palagay ko kasama to sa caliper repair kit. *sir dusky meron ba nabibili nito separately??