Mazda B-Series (B2200/B2500)

[yowza01]

fyi lang po for the group:

November 18-21, 2010 Manila Auto Salon SMX Convention Center, Mall of Asia Pasay City.

Perhaps possible EB date and place din yun...

[zner2525]

*zner i know what you feel when your dad is using your car. Last night may addition nanaman sa mga tama yung truck. We switched cars the pag uwi naatrasan daw sya ng Jeep. Ang nasabi ko nalang is "dad, ikaw nagsasabi sakin na wag tumutok then ikaw din pla tumutok". Well we can't be angry naman kasi they bought the trucks for us in the first place. I think i saw ur truck sa village na mag kargang bakal. Di ko na kuha complete number. All i can remember is "WAY ---" yung plate number. Phase 2 ako. Sa may likod ng club house. If mapadaan ka ng Maple St. makikita mo truck ko kasi sa labas lang yung nakapark. (kawawa nga kaya lang di kaysa sa garahe) hehehe.

yes sir.. samin nga yung nakita mo.. hinanap ko din truck niyo sir.. nakita ko na.. dumaan nga po ako sa harap ng house niyo eh.. hehe.. kung makakapunta ako sa EB, baka pwedeng sabay na tayo sir.. para may kasama ako..

[duskylim]

Hi rna:

Don Jose Subdivision is located on the same side and just above the new PureGold Mall along Commonwealth Avenue.

The entrance is between the Flying V gas station and the Petron gas station - directly opposite that of our sister (and much smaller subdivision, Dona Carmen).

You guys in the Batasan housing complex are actually much closer to the Ever-Gotesco mall than to Fairview proper.

Actually we are not quite within Fairview itself - we are still classified as Barangay Commonwealth rather than Barangay Fairview.

If you've seen a steel-gray B2500 with a lowered front end (accidental, not deliberate) being driven madly down Commonwealth towards U.P. Diliman and Ateneo then its probably mine.

Hope to see you in the next EB.

Guys:

I vote for Pasig area near the old McDo where we 1st met....

I'm not in favor of Makati or other places like it as walang hiya talaga yung mga nang-huhuli duon.

Best Regards,

Dusky Lim

P.S. Ronn - malabo ka ba sa Nov 7? - paano yan?

[rivco]

*rna I know the place naman kasi i've been there before and i pass that area sometimes. The thing is baka mahirapan yung iba.

*zner Sige convoy nalang tyo siguro sa next na EB


*dusky Mcdo C5 Libis would be great. Mahirap nga talaga makati area kasi ang daming nanghuhuli..

[rna800]

Hi rna:

Don Jose Subdivision is located on the same side and just above the new PureGold Mall along Commonwealth Avenue.

The entrance is between the Flying V gas station and the Petron gas station - directly opposite that of our sister (and much smaller subdivision, Dona Carmen).

You guys in the Batasan housing complex are actually much closer to the Ever-Gotesco mall than to Fairview proper.

Actually we are not quite within Fairview itself - we are still classified as Barangay Commonwealth rather than Barangay Fairview.

If you've seen a steel-gray B2500 with a lowered front end (accidental, not deliberate) being driven madly down Commonwealth towards U.P. Diliman and Ateneo then its probably mine.

Hope to see you in the next EB.

Guys:

I vote for Pasig area near the old McDo where we 1st met....

I'm not in favor of Makati or other places like it as walang hiya talaga yung mga nang-huhuli duon.

Best Regards,

Dusky Lim

P.S. Ronn - malabo ka ba sa Nov 7? - paano yan?

I know Dona Carmen. I once brought a priest there. They have like a convent there.

I live in Filinvest, sir and our barangay belongs to Batasan Hills. I thought the teal green pick up that I often see here in our subdivision is yours.hehe

I would look out for that steel gray with a lowered front end and madly driven pickup of yours.hehe

See you on the road!

[pigface]

guys, okay yung sinabi ni yowza, malamang sa show na tayo magkkita or after. The problem naman with me is kung gawing nov 7 ang EB, baka di ako maka punta dahil malapit na mag show nun, and busy na dito sa shop. Pag on the show itself naman, mahirap naman iwan yung booth namin hehe. Although dadalin ko yung pickup ko nun. After the show naman, its gonna be tough truck challenge, and its our 10th year, so busy din ako until its over. Which is after the first week of december.

Kung mag EB tayo sa show okay yun, pero mabilis lng ako dun, but you could see my truck sa parking for the participants nga lang hehe.

[azzkkr2600]

fyi lang po for the group:

November 18-21, 2010 Manila Auto Salon SMX Convention Center, Mall of Asia Pasay City.

Perhaps possible EB date and place din yun...

ayos to sir!

[azzkkr2600]

guys, okay yung sinabi ni yowza, malamang sa show na tayo magkkita or after. The problem naman with me is kung gawing nov 7 ang EB, baka di ako maka punta dahil malapit na mag show nun, and busy na dito sa shop. Pag on the show itself naman, mahirap naman iwan yung booth namin hehe. Although dadalin ko yung pickup ko nun. After the show naman, its gonna be tough truck challenge, and its our 10th year, so busy din ako until its over. Which is after the first week of december.

Kung mag EB tayo sa show okay yun, pero mabilis lng ako dun, but you could see my truck sa parking for the participants nga lang hehe.

pwede din sa Nov21 mga sirs! sa MOA or sa McDo Macapagal. dating oras 8am. eto vote ko.

*sir pigface: new photos naman dyan ng finished project mazda B2500 ironman edition mo!

[azzkkr2600]

sir, ask ko lang i am planning to convert my manual steering to power steering since malaki yung clearance ng steering ko eh.. do u have any idea if there's a shop doing conversions particularly for our trucks? thanks po

not sure kung about the shop but i think you can get the OEM mazda power steering assembly from AutoRama banawe. they sell orig mazda truck parts.

[azzkkr2600]

Game ako sa Nov 7 but if wala si ronn pano kaya tyo? si ronn may kilala ng lahat and he is like the glue that sticks us all together. hehe.. okay lang sakin macapagal to give way to the others na malayo but let see kung san mas marami. Let us vote nalang for the next EB for the venue, date, and location nyo so every one can have an idea kung san kayo manggagaling. Mckinley hill is okay din but i dnt think madami na may alam nun..

Rivco votes Nov 7 or 21. Mcdo C5
I'm from pasig kasi. hehehe..

*zner i know what you feel when your dad is using your car. Last night may addition nanaman sa mga tama yung truck. We switched cars the pag uwi naatrasan daw sya ng Jeep. Ang nasabi ko nalang is "dad, ikaw nagsasabi sakin na wag tumutok then ikaw din pla tumutok". Well we can't be angry naman kasi they bought the trucks for us in the first place. I think i saw ur truck sa village na mag kargang bakal. Di ko na kuha complete number. All i can remember is "WAY ---" yung plate number. Phase 2 ako. Sa may likod ng club house. If mapadaan ka ng Maple St. makikita mo truck ko kasi sa labas lang yung nakapark. (kawawa nga kaya lang di kaysa sa garahe) hehehe.

*rna hassle tlga pag nasasabitan ng PUV! wala kang magawa tapos may mga Pulis or traffic enforcer pa na incompetent! Well atleast you kept your cool and di mo sinapak! hahaha! kasi wala ka din talaga mapapala sa mga PUV drivers.

*sir rivco: sorry nagbigay ako ng date kaso di ako makakapunta. late kasi nagsabi pinsan ko. ninong ako sa binyag di pwede i-proxy e. okay lang kahit wala ako kung matutuloy ng Nov 07. ikaw na lang ang contact person tutal tayo din naman namamara ng mga dumadaang mazda pickup dati sa McDo C5 nun first EB.

pwede din naman sa ibang date, i.e Nov21. tamang tama may car show sa MOA SMX.

*guys: ano ang the best date para sa inyo?

[yowza01]

not sure kung about the shop but i think you can get the OEM mazda power steering assembly from AutoRama banawe. they sell orig mazda truck parts.

copy sir, dun na rin ba gagawin or just the parts...thanks sir...

[azzkkr2600]

copy sir, dun na rin ba gagawin or just the parts...thanks sir...

*sir yowza01: parts lang alam ko. magparefer ka din kung kanino pwede ikabit.

*guys: meron kayong alam na mechanic na pwede gumawa ng manual to power steering conversion?

[zner2525]

mga sir.. may ask lang ako.. whenever I reach 3k rpm, i'm hearing a screeching sound under the hood.. yung mga belt kaya yun? palitin na?

[pigface]

*ronn - napa align ko na kanina yung truck ko, ill post pictures tomorrow, may exam ako mmya eh haha. Yung bumper ko, likod tubular lang, harap inaantay ko pa matapos sukatan yung brackets. Anyway, stock bumper muna nilagay sa harap, pinakulayan nlng ng black para magamit ko.

One thing I noticed, ang gumanda lalo yung takbo ng engine ko, parang hindi nahirapan. Kaya pa nia actually mag 35" na gulong, kaso tatama na sa fender wall kaya wag nlng. At mataas na din, bka di na maka akyat ang mga kamag anak haha. Next project AUDIO!

[Ebasreb]

ayos to sir!

Pwede na ang NOv. 21, sunday. Maluwag ako nun, ewan lang ang iba

[azzkkr2600]

mga sir.. may ask lang ako.. whenever I reach 3k rpm, i'm hearing a screeching sound under the hood.. yung mga belt kaya yun? palitin na?

matinis ba sound? malamang nga fan belts. maluwag and/or may mga punit na. have it checked/replaced. get dayco or bando only bro.

[azzkkr2600]

*ronn - napa align ko na kanina yung truck ko, ill post pictures tomorrow, may exam ako mmya eh haha. Yung bumper ko, likod tubular lang, harap inaantay ko pa matapos sukatan yung brackets. Anyway, stock bumper muna nilagay sa harap, pinakulayan nlng ng black para magamit ko.

One thing I noticed, ang gumanda lalo yung takbo ng engine ko, parang hindi nahirapan. Kaya pa nia actually mag 35" na gulong, kaso tatama na sa fender wall kaya wag nlng. At mataas na din, bka di na maka akyat ang mga kamag anak haha. Next project AUDIO!

wait namin photos bukas bro! ganda nyan for sure! kumusta ang ride nya ngayon with the ironman torsions?

san mo balak magpa-audio setup? recommend ko friend ko sa lipa.

[azzkkr2600]

Pwede na ang NOV. 21, sunday. Maluwag ako nun, ewan lang ang iba

NOV 21 din vote ko mga sirs! sorry di talaga pla ako pwede sa NOV7 e. may commitment sa family.

[duskylim]

mga sir.. may ask lang ako.. whenever I reach 3k rpm, i'm hearing a screeching sound under the hood.. yung mga belt kaya yun? palitin na?

Dear zner:

You're right, the most likely candidate for a screeching sound under the hood is a slipping fan belt.

Try replacing them with TOOTHED belts that are more efficient than standard v-belts.

Don't over-tighten your belts as this is the best way to ruin your bearings.

Best Regards,

Dusky Lim

[bors]

Let's see pics of your truck pigface. Im sure maganda yan, 199ORH eh. Baka pudeng magaya.