2015 Mazda 2

[tyr0]

Sir, ive seen your car dito sa thread with aftermarket wheels and lowering springs na, may i know ano specs ng tires mo and wheels mo? Including offset.

I’ve already bought myself lowering springs for my car, hindi ko palang pa napapakabit, and aim ko din no rubbing issues just like yours and trajavante.

Thou travajante has coilovers, sigurado no rub.

My m2 has 17x7.5, 45 offset wheels, and 205 45 tires.

will post pictures after springs installation.

Rota blitz
17* 7.5
Et 45
With 5mm spacer

Tires
Aeolus Au04
205/50/17

Cambered at -1.2° (with spc camber bolts)

i have minimal rubbing on front when doing full(sagad) turn.

Sent from my ONEPLUS A5010 using Tapatalk

[travajante]

Sir, ive seen your car dito sa thread with aftermarket wheels and lowering springs na, may i know ano specs ng tires mo and wheels mo? Including offset.

I’ve already bought myself lowering springs for my car, hindi ko palang pa napapakabit, and aim ko din no rubbing issues just like yours and trajavante.

Thou travajante has coilovers, sigurado no rub.

My m2 has 17x7.5, 45 offset wheels, and 205 45 tires.

will post pictures after springs installation.

Grats!!! Your wheel & tire specs will be fine. Add some 5mm/54.1mm hubcentric spacers. What springs have you? Please share pics!!!

Btw, BrownMouse & WhiteMouse share same model Tanabes.

Sent from my SM-G950F using Tapatalk

[7138]

Rota blitz
17* 7.5
Et 45
With 5mm spacer

Tires
Aeolus Au04
205/50/17

Cambered at -1.2° (with spc camber bolts)

i have minimal rubbing on front when doing full(sagad) turn.

Sent from my ONEPLUS A5010 using Tapatalk

Grats!!! Your wheel & tire specs will be fine. Add some 5mm/54.1mm hubcentric spacers. What springs have you? Please share pics!!!

Btw, BrownMouse & WhiteMouse share same model Tanabes.

Sent from my SM-G950F using Tapatalk

Thank you for your reply guys. Its a relief knowing that my spring/wheel combo will be ok.
I have tein s-techs, will also buy o-sulees nadin para hindi dapang dapa on full load, especially at the back.

will post pics after installation.

[travajante]

Thank you for your reply guys. Its a relief knowing that my spring/wheel combo will be ok.
I have tein s-techs, will also buy o-sulees nadin para hindi dapang dapa on full load, especially at the back.

will post pics after installation.

S-Techs not H-Techs? Tein only lists HTech SKMC2-G1B00 for the M2 DJ, sir. Please verify.

Sent from my SM-G950F using Tapatalk

[7138]

S-Techs not H-Techs? Tein only lists HTech SKMC2-G1B00 for the M2 DJ, sir. Please verify.

Sent from my SM-G950F using Tapatalk

After getting the item from the shop, the box is labeled that it is for the previous gen (DE),
and i talked directly to the owner of the shop and told me that it is still the same stechs that they installed
on other m2s DJ, saw a couple of install DE videos on youtube and it looks like the mounts are the same.
Searched the shop's fb page and saw an m2 sedan installed with the same springs.

Sa kanila ko padin naman ipapakabit, gusto ko lang matapos muna yung pms sched ko this June
(or earlier if the casa allow me), and ill be bringing it back sa shop na pinagbilhan ko and they will install it,
ibabalik ko sa kanila yun kapag hindi fit.

Am not that in doubt pa sa kanila as of now, because sikat yung shop na pinagkuhanan ko,
and the owner/manager assured me that it is for the same car. lets see after ng installation,
will update soon.

[tyr0]

After getting the item from the shop, the box is labeled that it is for the previous gen (DE),
and i talked directly to the owner of the shop and told me that it is still the same stechs that they installed
on other m2s DJ, saw a couple of install DE videos on youtube and it looks like the mounts are the same.
Searched the shop's fb page and saw an m2 sedan installed with the same springs.

Sa kanila ko padin naman ipapakabit, gusto ko lang matapos muna yung pms sched ko this June
(or earlier if the casa allow me), and ill be bringing it back sa shop na pinagbilhan ko and they will install it,
ibabalik ko sa kanila yun kapag hindi fit.

Am not that in doubt pa sa kanila as of now, because sikat yung shop na pinagkuhanan ko,
and the owner/manager assured me that it is for the same car. lets see after ng installation,
will update soon.

Based sa experience of a friend. Yes itll fit. But compression rate is diff. Drop and comfort are totally compromised. Confirm with the shop. Friend sold his and waited for DJ specific ones. Actually i know 2 of em already who sold their DE springs and waited for DJ specific ones.

Sent from my ONEPLUS A5010 using Tapatalk

[7138]

Based sa experience of a friend. Yes itll fit. But compression rate is diff. Drop and comfort are totally compromised. Confirm with the shop. Friend sold his and waited for DJ specific ones. Actually i know 2 of em already who sold their DE springs and waited for DJ specific ones.

Sent from my ONEPLUS A5010 using Tapatalk

How does it differ? sobrang sagad ba drop, or parang walang drop? too soft/stiff?

[travajante]

How does it differ? sobrang sagad ba drop, or parang walang drop? too soft/stiff?

DE & DJ differ in design spring rates. I would repeat what tyr0 advised. Go for DJ specific ones. Others have guinea'd the DE springs on DJ with regrets. Something to learn from....just my 2cents, sir.

Sent from my SM-G950F using Tapatalk

[tyr0]

How does it differ? sobrang sagad ba drop, or parang walang drop? too soft/stiff?

Drop is not consistent and from what ive heard, very stiff.

Sent from my ONEPLUS A5010 using Tapatalk

[travajante]

Vendors are supposed to provide proper guidance....
For those searching for the correct DJ mod options, from performance to aesthetics, just contact OVTph +639174726847. It's your help hotline.[emoji4]

Sent from my SM-G950F using Tapatalk