Results 3,011 to 3,020 of 3883
-
January 24th, 2009 08:22 PM #3011
-
January 24th, 2009 08:39 PM #3012
-
January 26th, 2009 06:38 PM #3013
-
January 27th, 2009 08:24 AM #3014
thanks sir Val, I again tried this (speed up on a curve then apply the brakes) along Pugo, La Union on my way back to Baguio. Daming curves din kasi dito. Nawala na yung vibration pero ang naririnig ko na lang eh parang nagkikiskisan na bakal..mahina lang naman so I think hindi naman major concern ito at the moment..i hope.
-
Verified Tsikot Member
- Join Date
- Jan 2008
- Posts
- 130
January 27th, 2009 10:15 AM #3015
-
January 27th, 2009 12:01 PM #3016
brought my carens today sa service center, found out that air filter is very dirty and clog up and had to replace it with new one.
-
January 31st, 2009 09:52 AM #3017
Greetings to all the happy Carens owners out there. Bought my M/T Carens Oct,08 and am having a great ride with it. I would like to ask if the rear wheels, specifically the right one is really splayed like that. It seems too off vertical to me. Does anyone have experience with this matter? Thanks.
-
January 31st, 2009 01:55 PM #3018
-
January 31st, 2009 06:12 PM #3019
-
Tsikot Member Rank 2
- Join Date
- Jan 2008
- Posts
- 4,726
January 31st, 2009 07:43 PM #3020in technical term positive or negative camber... in tagalog bisaklat.. in our case negative camber when the rear is fully loaded
use in sentence.. " Pare, bakit ganun yung carens parang naka bisaklat yung gulong lalo na pag puno ng sakay..."
this is common problem with multi-link suspension..
OT: I observe this also to most Honda CRV especially on the rear.. you can see the tire thread pattern is not even and worn out on the inner side.,, this can be solved by adjusting the camber of the rear wheels, or raising the suspension to compensate the negative camber
repair kit lang. car care nut says, for toyotas, he recommends entire assembly replacement for...
rack and pinion repair