What did you do to your ISUZU today?

[aioshin]

^thanks sa input sir! ok na ba yung replacement na crankshaft pulley? tatagal naman kaya? balak ko kase orig na isuzu na bibilhin ko eh. nagcanvass ako sa jason 4.8k yung orig for my fuego's 4ja1.




btt:

nag-diy ako. i used a syringe to suck the dirty clutch fluid and i also cleaned the clutch reservoir before i filled it up again.

So far, more than a year na and no sign of issue dun sa replacement pulley.

[sevenstring]

So far, more than a year na and no sign of issue dun sa replacement pulley.

thanks sir.

BTT:

replaced the crankshaft pulley this afternoon. Bumili na lang ako ng replacement sa auto supply worth 2.2K. Yasui brand Made in Japan nakalagay sa box. Sana maganda quality at hopefully tumagal. Hindi naman yata kilala yung Yasui na brand kaya wala sigurong peke nito! LOL!

[sevenstring]

duplicate post! PFFT!

[anthon05]

Replaced brake shoe on my xto crosswind. 5 years na kaya palit na with bendix

brake shoe, yung luma less than 50% wear, puede pa naman pero pinalitan ko na.
itong bendix sa umpisa may noise pag matagal na gamit nawawala. next palitan ko
yung brake pad, might try bosch naman. matagal na rin kasi 5yrs na rin. last year pina check ko 50% wear pa lang.

[anthon05]

Replaced brake shoe on my xto crosswind. 5 years na kaya palit na with bendix

brake shoe, yung luma less than 50% wear, puede pa naman pero pinalitan ko na.
itong bendix sa umpisa may noise pag matagal na gamit nawawala. next palitan ko
yung brake pad, might try bosch naman. matagal na rin kasi 5yrs na rin. last year pina check ko 50% wear pa lang.
napansin ko itong bendix brake shoe iba material sa conventional shoe, color niya dark gray. yung conventional maroon brown na medyo pino ang texture. itong bendix may gaspang. try ko lang kasi usually ginagamit ko yung mga unknown

brands na nabibili sa auto supply.

[PJ Sinohin]

mu-x: removed GenCars sn pablo sticker and E.S.C. (electronic stability control) sticker from rear windshield

[PJ Sinohin]

MU-X: 10LED T10 projector map light replacement

[PJ Sinohin]

MU-X: 10LED T10 projector map light replacement

[miked]

So far, more than a year na and no sign of issue dun sa replacement pulley.

ano ba problema sa OEM nyang crank pulley bro? anong odometer reading mo nung nagkaproblema ito?

worn out na ba yung grooves? or nagwowobble dahil worn out na rin yung inner diameter?

[sevenstring]

sa case ko, kumalas na ung rubber damper sa gitna kaya minsan hindi na umiikot. 244k odo ko. not sure kung napalitan na ng previous owner.

[aioshin]

ano ba problema sa OEM nyang crank pulley bro? anong odometer reading mo nung nagkaproblema ito?

worn out na ba yung grooves? or nagwowobble dahil worn out na rin yung inner diameter?

worn out na yung rubber, welded na nga lang, sobrang likot na nito. 232K odo ko nung pinalitan ko yung pulley.

[aioshin]

ano ba problema sa OEM nyang crank pulley bro? anong odometer reading mo nung nagkaproblema ito?

worn out na ba yung grooves? or nagwowobble dahil worn out na rin yung inner diameter?

worn out na yung rubber, welded na nga lang, sobrang likot na nito. 232K odo ko nung pinalitan ko yung pulley.

[aioshin]

pullout starter motor, brought it to a shop for checking. Then put it back and bought a new Battery. Nahirapan ako dun sa pagtangal ng starter motor (as first timer).

[anthon05]

at Wheelers banawe replaced front shocks with kyb gas a just ,old shocks still OEM.

and replaced brake pads with bosch. my ride si isuzu crosswind 2001

- - - - - - - - - - - - - - - - - - - - - -

at Wheelers banawe replaced front shocks with kyb gas a just ,old shocks still OEM.

and replaced brake pads with bosch. my ride si isuzu crosswind 2001

[aioshin]

Replacing inline fuel filter before water separator with clear one, and I can really see the rust and dirt that comes with the fuel, kasi nag pupugak pugak na pag lampas 40kph and speed at naka 3gear. not able to clean the fuel tank yet

- - - - - - - - - - - - - - - - - - - - - -


Replacing inline fuel filter before water separator with clear one, and I can really see the rust and dirt that comes with the fuel, kasi nag pupugak pugak na pag lampas 40kph and speed at naka 3gear. not able to clean the fuel tank yet

[LancerA174A]

Replacing inline fuel filter before water separator with clear one, and I can really see the rust and dirt that comes with the fuel, kasi nag pupugak pugak na pag lampas 40kph and speed at naka 3gear. not able to clean the fuel tank yet

- - - - - - - - - - - - - - - - - - - - - -


Replacing inline fuel filter before water separator with clear one, and I can really see the rust and dirt that comes with the fuel, kasi nag pupugak pugak na pag lampas 40kph and speed at naka 3gear. not able to clean the fuel tank yet

Ganito din nangyayari sa amin sir, kumakadyot siya pag medyo mabagal sa 3rd gear, dati wala naman yun. Yan pala yung culprit. We replaced the injection pump already pero surplus akala ko yun dahilan.

[anthon05]

Replaced my 32month Enduro 2sm battery. Still good and no signs of dying out but i felt it has served its purposes and

ayaw ko masiraan I have travel plans this long holiday break. Also bought Seiken clutch operationg assembly , pa replace

ko na yung old one, kahit hindi pa sira upon inspection may moisture na sa seals.. Just preventive maintenance.

[Neil Fuentes]

Got my crosswind front bumpers painted as well as the mudguards. But sadly parang di na siya kasing kintab ng orig paint

[aar0nix]

Laser Rear Foglight

[aioshin]

replaced the ff:

rear crankshaft oil seal - 4ja1 - none collar seal ( specified by mechanic, dahil mahirap daw ibalik yung with collar.) isuzu parts - price: 1000
replaced clutch disk - 1600 pesos
replaced release bearing - 1200 pesos
labor - 1800 pesos