Hyundai Sta. Fe Club Logo

[allanctan]

Sir Allan, last na last na po... (hehehehe) Pwede kaya natin try yung clear na lang na background kase po diba most of our SF have dark tints na rin diba? Saka po yung numbering pwede na rin po sanang tanggalin. As suggested by Sir Jailanjz, sa mas maliit na lang na sticker natin ilagay yung memebership number.

Yung malaking sticker for the back of the car and "shield" na may membership number for the front po.

Kung clear ang background, ganyan din naman ang effect pag nakadikit na sa mga kotse natin di po ba? Eka nga parang naka float yung logo natin!

Thank you thank you talaga... I feel so helpless na hindi ako makatulong sa paggawa ng sticker with you. Wala kase akong technical expertise.

No problem po. The changes are minor anyway, I think we can do the changes when we are ready to get it printed. The background is really intended to be transparent... black lang sya since ganun yung effect pag nasa tint.

As for the small logo in front, since yung windshield is generally not BLACK, rather neutral or transparent, I think di maganda yung design... we need something that will stand out against lighter background. Alternative is to include the black background, kaya lang magiging square yung sticker. If you feel like doing the front and back sticker, we'll need to rethink the color scheme, especially yung nasa windshield. Any thoughts?

Maam LR, sabay na lang po tau punta dun sa sticker shop para kung may changes or anything needed, we can do it right away. Kung pwede weekdays para sama ko ung designer.

[LadyRider]

No problem po. The changes are minor anyway, I think we can do the changes when we are ready to get it printed. The background is really intended to be transparent... black lang sya since ganun yung effect pag nasa tint.

As for the small logo in front, since yung windshield is generally not BLACK, rather neutral or transparent, I think di maganda yung design... we need something that will stand out against lighter background. Alternative is to include the black background, kaya lang magiging square yung sticker. If you feel like doing the front and back sticker, we'll need to rethink the color scheme, especially yung nasa windshield. Any thoughts?

Maam LR, sabay na lang po tau punta dun sa sticker shop para kung may changes or anything needed, we can do it right away. Kung pwede weekdays para sama ko ung designer.

Thanks so much ulit Sir! Kung matapos ang design by this week, maybe we can go there next week kung pwede kayo? Pasama tayo kay Vincent sa anak ni Sir Benjie kase sya may kakilala sa Sticker Shop.

Swerte nga natin kase ang kagandahan dun sa friend ni Vincent, hindi tayo pinipilit magpagawa ng marami. Kahit nga daw 10 piraso lang gagawa sila pero sabi ko naman hindi naman ganun ka konti pagagawa namin. Siguro mga 50 pcs. pataas ang sabi ko sa kanya.

With regards to the front sticker, siguro maganda kung yellow ang background, then black na may outline na white ang shield and letterings? Ano kaya Sir?

[doc vince]

Ok na mga Sirs lahat ng suggestions nyo, agree na ako sa mga revisions, pag dating sa EB we should vote for officers to legitimize our club.

[doc vince]

How much would we be charging for the stickers?

[allanctan]

Thanks so much ulit Sir! Kung matapos ang design by this week, maybe we can go there next week kung pwede kayo? Pasama tayo kay Vincent sa anak ni Sir Benjie kase sya may kakilala sa Sticker Shop.

Swerte nga natin kase ang kagandahan dun sa friend ni Vincent, hindi tayo pinipilit magpagawa ng marami. Kahit nga daw 10 piraso lang gagawa sila pero sabi ko naman hindi naman ganun ka konti pagagawa namin. Siguro mga 50 pcs. pataas ang sabi ko sa kanya.

With regards to the front sticker, siguro maganda kung yellow ang background, then black na may outline na white ang shield and letterings? Ano kaya Sir?

I'll post the revisions in a while after its ready. Pasakay ako sa SF nyo para macompare ko yung rides natin. Feeling ko kasi malambot at mababaw yung suspension ng SF ko... but then again, maybe I'm being overly critical.

[LadyRider]

How much would we be charging for the stickers?

Hello Sir! wala pa pong price for the stickers! We will announce it as soon as the stickers are in the process of printing! Bale lalabas na dalawa ang stickers natin. Isang medyo maliit for the front and the larger one for the back! Sir Allan will post the revised sticker soon! So hang in there friends! Excited na rin ako eh! hehehehe

[allanctan]

Eto na po suggestion ni Kervi The Designer...
All stickers will be printed on transparent background.

REAR in tint:


WINDSHIELD:

[trackers888]

Eto na po suggestion ni Kervi The Designer...
All stickers will be printed on transparent background.

REAR in tint:


WINDSHIELD:

Lufet nyo Sir!

[jailanjz]

Eto na po suggestion ni Kervi The Designer...
All stickers will be printed on transparent background.

REAR in tint:


WINDSHIELD:

perfect! ang ganda na sir.

sir ano pala size ng mga stickers natin?

[allanctan]

perfect! ang ganda na sir.

sir ano pala size ng mga stickers natin?

Approx. Suggested Size:

Front: 2.5" x 3"
Rear: 12" x 3"

We can ask the sticker printer for their recommendations... they should know better.