Results 1 to 8 of 8
-
July 18th, 2006 04:46 PM #1
Good day to all!
Guys, I just wanna ask your suggestions. I bought a lowered 97 civic, and i find the front end too low. Now, I wanna lift a little, say 1.5 inches. How shall i do it without changing the springs. Thanks in advance.
-
July 18th, 2006 04:54 PM #2
depends on what was done to lower the car.
example:
-front springs were cut while the rear springs are stock & untouched. simply replace the fereront springs with stock springs will solve the problem.
-
July 18th, 2006 05:08 PM #3
Cut or lowerings ba ang ginamit?Kung cut lagyan mo ng lifter.Sa una hindi matagtag pero pagtumagal matagtag na or replace the springs to avoid the tagtag ride..
-
July 18th, 2006 05:21 PM #4
if you want to bring it back to stock.. look for stock springs surplus... it will resolve the issue
-
July 18th, 2006 05:25 PM #5
thanks for the response guys. i appreciate it.... i'll try to deteremine whether the springs were cut or replaced. if the springs were replaced, approximately, how much does a stock spring cost?
-
-
July 18th, 2006 06:31 PM #7
actually less than 1K. sa banawe 600 petot each ang springs. palit stock na lang yan solve na problem mo.
-
July 18th, 2006 06:45 PM #8
Swerte mo if the springs that are installed now are not cut, and is a real lowering springs... tago mo nalang pag gusto mo na ibalik tsk tsk
Aurelio Automobiles | Facebook
Aurelio - First Filipino Super Car