2012 Ford Ranger

**Djerms** · August 13th, 2013 04:08 PM

Originally Posted by GreenAndWhite

Not really sir, since I chose not to remove the cover of bulb itself. It only reflects inside the headlight chrome, kaya hindi ganun kataas.

Even if you dont remove the shroud medyo malakas ang hid on reflector lamps. Invest ka bro sa projector mas maappreciate mo din ang hid

Sent from my GT-I9082 using Tapatalk 2

**harvzz** · August 13th, 2013 04:28 PM

Mga Sir, ano pong car mat ang gamit nyo sa mga Ranger nyo ?

3M Nomad maganda po ba yun ? Saan makabili non ng mura ?

**timykoo** · August 13th, 2013 05:53 PM

Anyone with any idea?

http://tsikot.com/forums/auto-painti...0/#post2199655

**rwesley** · August 13th, 2013 07:04 PM

Originally Posted by Turbonitecs

Aray! Ganyan talaga sa parking minsan kaya ako tinatandaan ko plate ng katabi ko lalo na pag tight yong parking. Dalhin mo na lang sa casa free pa ang touch-up paint nyan.

Kung wala namang paint chips PDR mo nalang

**ebmosqueda** · August 13th, 2013 09:28 PM

Eto na daw po ang format ng future PHL plate

**srbogoy** · August 13th, 2013 10:09 PM

heads up lang guys !!!!!, paki-check nyo ang bedliner ng XLT nyo top side. (see pics below)
ang sa akin very poor fitting ang both left and right top side, nakaawang and very deformed.
pag nagpacarwash pumapasok ang tubig sa ilalim ng bedliner, delikado sa rust build up sa ilalim.
nagclaim na ako sa dealer pero 1 month plus na di pa napalitan, ang sabi lang ay ikunsulta pa nila sa maker ng bedliner.
wala pa daw iba nagkaganito at nagclaim kundi ako lang kaya wala silang action, sayang ang bayad tapos lemon bedliner...

**timykoo** · August 14th, 2013 01:30 AM

Originally Posted by srbogoy

heads up lang guys !!!!!, paki-check nyo ang bedliner ng XLT nyo top side. (see pics below)
ang sa akin very poor fitting ang both left and right top side, nakaawang and very deformed.
pag nagpacarwash pumapasok ang tubig sa ilalim ng bedliner, delikado sa rust build up sa ilalim.
nagclaim na ako sa dealer pero 1 month plus na di pa napalitan, ang sabi lang ay ikunsulta pa nila sa maker ng bedliner.
wala pa daw iba nagkaganito at nagclaim kundi ako lang kaya wala silang action, sayang ang bayad tapos lemon bedliner...

Yan din sinasabi ko dati dito. Kaso hindi ata napansin.

Saw some several rangers on the road din with these problems. We have the same problem sir. Pangit talaga fitting nung bedliner. Which casa are you complaining from? Sinabi na namin yun from the day na kukunin pa lang. Kaso NR yung SA. Tsk. I'll follow up these with the SA. Pati yung tint na v-kool na kinabit nila may bubbles.

**meirkahana** · August 14th, 2013 05:55 AM

Can I ask you where did you get your roller lid and what was the price? As when I read this thread, everyone have some reservations, once for Carryboy, once for Pace Edward or Raiton and so on. Is there any lid available, which is as heavy duty as the one on the youtube video? [ame=http://www.youtube.com/watch?v=nKKgpARdvRk]At www.accessories-4x4.com: Ford Ranger XLT aluminum roller lid with original Ford's roll bar+grille - YouTube[/ame] Thanks for any advice.

**srbogoy** · August 14th, 2013 08:14 AM

So guys bigyan natin ng pansin 'to para marami na tayong magcomplain para mapansin tayo.

*timykoo, Ford Cebu Lahug ang dealer ko, kinunan ng pics at paper works done sa dealer last 02 July'13 but sabi wala pa daw reply ang supplier ng bedliner, pwede ba yan????? Am pangit tignan, sayang lang ang tayo ng XLT masisira lang sa deformed / poor fitting na bedliner.

**nglu** · August 14th, 2013 08:43 AM

Originally Posted by ebmosqueda

Eto na daw po ang format ng future PHL plate

Di ko pa inabutan bagong plates.. luma pa din yung akin mga sir. - Pano ba nila malalaman kung may plates ka na? wala pa kasing sticker - my SA just gave me my plates without stickers so ayun tinanggal ko na lang pag coding. hahaha..