Remote bypass oil filtration

[12vdc]

^ Realistic yang 15GPH for small displacement, pero the larger the better around 40GPH ok pa.

*Jay, this is the secondary filter with rolled media & standpipe compared to pleated media of fleetguard.
See those black, they are actually organic contaminants called asphaltines, very deadly to the injectors and pump.

Rolled media design is superb versus pleated media due to larger surface area of filter element.

Standpipe makes sure the fuel pump sucks only fuel from the buttom thereby avoiding air (if ever there are trapped air in the filter head). Also it makes sure all fuel passes completely to the filter media from top to buttom, fuel has no shortcuts unlike most replacement w/c has holes in the center tube.




The one on the left is the primary filter. Ordinary pleated media, WiF sensor, deep container for effective water coalescing.



We could actually extend up to 20k use(depends how trusty the pumps where u get fuel), see how the asphaltines go up, at 12k use its almost near the top.

What we are avoiding is plugging the filter with asphaltines causing restrictions,another is the primary filter collects wax during extended use that adds to plugging.

Plugged filter could pass water since coalescing does not happen and the water enters the fuel line in imulsified form.

When the water is in your injector, during combustion water molecules collapse causing "flashing" that dents/ destroys the injector tips.



Its still best to replace filters on regular interval, AKA proper service interval.

[jay185]

^ Realistic yang 15GPH for small displacement, pero the larger the better around 40GPH ok pa.

*Jay, this is the secondary filter with rolled media & standpipe compared to pleated media of fleetguard.
See those black, they are actually organic contaminants called asphaltines, very deadly to the injectors and pump.

Rolled media design is superb versus pleated media due to larger surface area of filter element.

Standpipe makes sure the fuel pump sucks only fuel from the buttom thereby avoiding air (if ever there are trapped air in the filter head). Also it makes sure all fuel passes completely to the filter media from top to buttom, fuel has no shortcuts unlike most replacement w/c has holes in the center tube.




The one on the left is the primary filter. Ordinary pleated media, WiF sensor, deep container for effective water coalescing.



We could actually extend up to 20k use(depends how trusty the pumps where u get fuel), see how the asphaltines go up, at 12k use its almost near the top.

What we are avoiding is plugging the filter with asphaltines causing restrictions,another is the primary filter collects wax during extended use that adds to plugging.

Plugged filter could pass water since coalescing does not happen and the water enters the fuel line in imulsified form.

When the water is in your injector, during combustion water molecules collapse causing "flashing" that dents/ destroys the injector tips.



Its still best to replace filters on regular interval, AKA proper service interval.

Wow. Thanks for the detailed explanation. Mine was just replaced yesterday. 60k pms. They replace fuel filters every 10k. Also I inquired about the fuel filter with glass. It will cost 12.5k +1k fitting. Since ok naman pala yung oem fuel filters then stick na lang ako dito. Total fuel filter replacement I think costs less than 3.5k with casa

Sent from my GT-N7000 using Tapatalk 2

[MrQ5]

oo nga ang mahal nag-inquire ako muntik na kong ma-pipi at di makapsalita sa presyo:aray:, my expected price is less than 4k but they quoted>10k
.

[12vdc]

Parkers goes around 7-8k without fittings.

[KCboy]

Sir,

Would any of you be able to suggest a baldwin equivalent oil filter amd uel filter for a 1.3liter suzuki jimny??

[Ry_Tower]

Sir,

Would any of you be able to suggest a baldwin equivalent oil filter amd uel filter for a 1.3liter suzuki jimny??

Kung ito description;

Outer Diameter : 75 mm
Thread Size : 3/4-16UNF
Height : 65.2 mm

Then Baldwin B33 ang bagay dyan!

[crazy_boy]

Sir,

Would any of you be able to suggest a baldwin equivalent oil filter amd uel filter for a 1.3liter suzuki jimny??

KCboy, may jimny ka na din sir? Hehe alam ko bt223 ang filter ng vit and jimny.

Sent from my GT-I9300 using Tapatalk 2

[Ry_Tower]

KCboy, may jimny ka na din sir? Hehe alam ko bt223 ang filter ng vit and jimny.

Sent from my GT-I9300 using Tapatalk 2

Congrats sa new ride! Napa-PMS mo na din yan at baldwin na ginamit mo?

Sent using Lenovo via Tapatalk

[crazy_boy]

Congrats sa new ride! Napa-PMS mo na din yan at baldwin na ginamit mo?

Sent using Lenovo via Tapatalk

RT, hindi ko pa napa PMS hehe baka next week. Ang sarap gamitin sa traffic, ang liit kasi. Ang bilis makasingit


Btt: kcboy, nasa fuel tank yata fuel filter ng jimny. Nabasa ko sa jimny thread. Post ka din doon para mabuhay yung thread hehe

Sent from my GT-I9300 using Tapatalk 2

[Battlestar]

Sir haba ng thread eh, saang shop pwede bumili ng baldwin filter? Thanks!

[KCboy]

RT, hindi ko pa napa PMS hehe baka next week. Ang sarap gamitin sa traffic, ang liit kasi. Ang bilis makasingit


Btt: kcboy, nasa fuel tank yata fuel filter ng jimny. Nabasa ko sa jimny thread. Post ka din doon para mabuhay yung thread hehe

Sent from my GT-I9300 using Tapatalk 2

Will get a used 2011 jimny this week, ito na po pagllaruan and isesetup ko til the end of 2013. If bt223, mura lang yun......

[crazy_boy]

Ang alam ko bt223. But double check also to be sure.

Sent from my GT-I9300 using Tapatalk 2

[number001]

Sir haba ng thread eh, saang shop pwede bumili ng baldwin filter? Thanks!

Volmax 244-83-75

[Battlestar]

Volmax 244-83-75

Thanks sir!

[crazy_boy]

KCboy, may jimny ka na din sir? Hehe alam ko bt223 ang filter ng vit and jimny.

Sent from my GT-I9300 using Tapatalk 2

Will get a used 2011 jimny this week, ito na po pagllaruan and isesetup ko til the end of 2013. If bt223, mura lang yun......

upon checking with the post of doc Otep, C-415 yung filter ng Jimny. if thats the case, baldwin equivalent should be B1402.

[JohnM]

C415 ang ginagamit ng Mitsu 4g engines and IIRC kasya sa '97 Subaru Legacy. Di kasya ang BT223 sa Legacy so I guess it follows na di sya pwede sa Jimny. Layo ng ikot ah

[Ry_Tower]

^ Oo nga, akala ko nga B33 eh.

[crazy_boy]

KCboy, may jimny ka na din sir? Hehe alam ko bt223 ang filter ng vit and jimny.

Sent from my GT-I9300 using Tapatalk 2

Will get a used 2011 jimny this week, ito na po pagllaruan and isesetup ko til the end of 2013. If bt223, mura lang yun......

C415 ang ginagamit ng Mitsu 4g engines and IIRC kasya sa '97 Subaru Legacy. Di kasya ang BT223 sa Legacy so I guess it follows na di sya pwede sa Jimny. Layo ng ikot ah

same sa mga lumang honda engines. B1402 hehe

[jj10910]

Good pm mga sir. Same po ba ang filter ng monter sport vgt and non vgt? Kung baldwin po BF7535 po ba?

[crazy_boy]

Dvldoc, im thinking of installing a remote bypass filtration on my jimny. It uses B1402 filter. Where can i find the cheapest kit?

Thanks

Sent from my GT-I9300 using Tapatalk 2