New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30
  1. Join Date
    Oct 2002
    Posts
    10,603
    #11
    hehehe! naku ewan ko :D hehehhe! Sabi ko sa friend ko blowby na rin makina nya kaya sabay kami mag-ooverhaul. Siya ata Late november :D Ako, hindi talaga marunong tumingin ng diesel dati thats why i got a lemon...... but a good looking lemon :D

  2. Join Date
    Oct 2002
    Posts
    170
    #12
    pajerokid,
    Magkano lahat ng gagastusin mo?

  3. Join Date
    Oct 2002
    Posts
    10,603
    #13
    yellow::: eto po ang running costs ko as of today

    TP Sleeves - 2350
    NPR Piston Rings - 1750
    MMC Overhauling Gasket - 4650

    medyo mahal kuha ko sa sleeves and rings but i was assured that 100% orig to. Yung overhaul kit costs 6600 sa kasa, got it from my contacts.

    My car's going under the knife on monday......


    +5000 for balancing of pulley, crank, etc.

    ayaw ako presyuhan ng labor coz kumpare ng pamangkin ko... bahala na raw ako :D

  4. Join Date
    Oct 2002
    Posts
    170
    #14
    pajerokid,
    wow 13750 na yan ah! kasama na sa 5000 ang labor ng machine shop? or balancing lang yan? more or less mga 20T pala... di pa kasama cost ng top overhaul mo nyan before right? so how much kung kasama yung top overhaul?

  5. Join Date
    Oct 2002
    Posts
    10,603
    #15
    yellow::: Ang pagkaka-explain sakin yung 5thou pang balancing lang. But if ever, doon ko na lang papa-balance kay Mang Mente. Baka mas mura. Close kami e :D (ang Galing po nyan mag port & polish, sikat sa old skool 'fast and the furious' crowd :D ) I'll update you on monday.

  6. Join Date
    Oct 2002
    Posts
    170
    #16
    pajerokid, thanks, I'm really interested malaman kung magkano talaga, thats the reason why I bought sir woodfires engine, mas nakamura ako in the long run tapos turbo intercooled pa. :mrgreen:

  7. Join Date
    Oct 2002
    Posts
    441
    #17
    pajerokid,
    san po ang shop ni mang mente?and ayos sa moonroof ah..hehehe..

    one more,stock ba yun hoodscoop mo?

    and what other mods have you done to your pajero?

  8. Join Date
    Oct 2002
    Posts
    10,603
    #18
    yellow::: pare di ko nakausap masyado this morning coz i had to rush to work.

    nikko m:::

    1. Mente picks up the heads at my place.
    2. My Hood is Stock............and for sale :D
    3. Dami e. Sound system, mga V46 stuff, but for offorad....
    - 32x11.5 AT tires
    - Old Man Emu Nitrocharger shocks
    - OME Rear springs.
    - Torsion bar adjustment
    - Removed Stepboard
    etc :D

    Engine.... port and polish and balancing :D

  9. Join Date
    Jul 2004
    Posts
    594
    #19
    Hello to Diesel Gurus,
    This is an old thread I picked as I search for pajero turbocharging.
    How do you know if the turbocharge is still functioning?
    What are the signs and manifestation?
    Is there a noticeable engine sound and loss of power?
    I'm the second owner of my ride and have not known
    the condition of my turbocharge as I bought it as I could
    not spell the difference, in the first place I do not know
    if the turbos still working.
    Another thing, Intercooler fan is working as I start the
    engine which means it bypassed the intercooler sensor,
    is this ok or is there an urgent need to replace the busted
    sensor and rewire the fan.

    Thanks in advance.

  10. Join Date
    Oct 2002
    Posts
    437
    #20
    I have in our website a turbo troubleshooting guide which may help....

    Pajerokid,
    you know what I think? di mo kailangan ng engine overhaul...yung oil might come from loose bearings and oil seals inside the turbo cartridge which is being fed by the engine for lubrication. what you need is turbo repair...

    engine overhaul should only be done if you loose compression already or what we call blowby.

    Doc Diesel

Page 2 of 3 FirstFirst 123 LastLast
Oil coming from Turbo...