civic ESi `94MdL engine problem.

**joey** · July 17th, 2007 02:44 PM

Originally Posted by kedrian

Just got back from HONDA Casa Quezon ave.

Bukas pa daw makukuha so iniwan ko na..6:30am andun na agad ako..inagahan ko na talaga.

Meron po ako nakausap na Customer ...He said that he have the same problem regarding my situation recently and fix it there na din in HONDA CASA.He said that its the SERVO that needs to be fix in able to smoothen the ride.Tama po ba sya??

Anu po ang SERVO??Saan po ito banda` makikita??

throttle position sensor siya ung nagbibigay ng angle ng valve sa ECU, nsa kabila siya ng linkage ng accelerator cable sa throttlebody. rough idling pagmay prblema nga yan sir

**kedrian** · July 17th, 2007 06:08 PM

update ..nakausap ko na po yung agent ng auto ko sa casa ng HONDA..

Servo is good pero......

Kailngan ko daw magpalit ng ECU dahil yung nakakabit sa akin eh ECU na pang VTEC matic.Hindi din daw nila madetect ang problema dahil hindi daw mabasa mabuti ng computer dahil nga hindi daw match ang makina at ang ECU.

Nakakapagod gumastos 12t yung nacanvass ko na worth ng ECU na surplus sa banaue.Parang gusto ko na yata ibenta at magferoza na lang for good

**joey** · July 17th, 2007 09:51 PM

sir try mo kay cinco sa aurora ave malapit sa psba papuntang katipunan, look for manny - 911-11-68 medyo mura kung may stock pwede rin kay baltak masmura dito jun - 7119736. over naman ung 12T

**joey** · July 17th, 2007 09:54 PM

malang more or less 7T may makita ka.
about feroza lakas sa gas nun pre

**kedrian** · July 18th, 2007 05:33 AM

sir joey saan po yung baltak??pareho din po ba sa katipunan??

**Galactus** · July 18th, 2007 06:34 AM

Parang makulit ang kasa at gusto talagang magbenta ng ECU ah.

I know your sparkplugs are relatively new, pero its worth a try to try and replace them with another set of sparkplugs, kahit used na. That's what they did at Speedyfix last week, at nawala yung pagpitik. As simple as that. And to think that I just installed them last Dec. 30, 2006!

**joey** · July 18th, 2007 07:21 AM

Originally Posted by kedrian

sir joey saan po yung baltak??pareho din po ba sa katipunan??

Kabignayan St. turn left sa last street if ur in banaue going to E.Rodriguez. kung Marikina area ka may importer jan sa Narra St., Conception okey din mabigay ng price. col 1st kung may stock cla para hindi kana mapagod sir

**kedrian** · July 18th, 2007 08:03 AM

* galactus

sir simula MAYO ng nabili ko po yung auto at hanggang ngayun ay nakakadalawang palit na ko ng brand new sets of spark plugs.Magiging 3rd sets of brandnew SPlugs na po kung papalitan ko pa.Ganun pa man susubukan ko na din.Thanks.

* Joey

sir,hindi ko na po tatawagan,ganun din po naman kailangan ko talaga magpalit ng ECU..kahit wala po sila stock I will try to find some shops that are selling.Thanks bossing you are a big help!

**kedrian** · July 18th, 2007 08:08 AM

Paalis na po ako.I will post some update and some news later regarding this headache im going through.

Buying ECU for Honda ESi manual `94MdL,Hope it works.

GoodLuck to me!

**kedrian** · July 18th, 2007 01:42 PM

Gud PM,Just got home w/ my Honda..I bought an Original stock ECU in Banaue and it cost me 10k Php.

Hindi ko na po binalik sa Honda Casa yung auto,maayus at maganda ang takbo ng auto.Sa tingin ko po ECU ang dapat palitan noon pa.

Mamayang konte i-start ko ulit ang auto pag medyo malamig na ang makina..pag nawala po ang erratic idling problem,I think its a good buy.