Recommend a Knowledgeable Installer for a Vacuum Gauge?

**vegetablejoe** · January 29th, 2015 03:47 PM

Hi. I would like to have my Veglia Vacuum Gauge installed in my Suzuki Jimny, but I don't who/where to bring it to...

The casa doesn't know what I'm talking about; their part-time installers only do stereo, tint and alarms.

I don't know/have any suki shops on Banaue. So I don't normally go there as ayokong dinudumog ako ng shady characters pagka parada pa lang.

Can anyone recommend a shop or person who I can rely on to do this job correctly?

I already have the gauge but also need a proper bracket/cowling/cover to mount in on the dashboard.

Thanks in advance!

Jaime G.

**pdspd** · January 30th, 2015 09:04 AM

First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.

[SIZE=1]- - - Updated - - -[/SIZE]

First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.

**vegetablejoe** · January 30th, 2015 09:51 AM

Sorry, sir, I don't know how to do PM on this forum yet.

Yes the vacuum gauge includes the t-connector and a long length of hose.

[quote=pdspd;2474647]First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.

**miked** · January 30th, 2015 10:24 AM

[QUOTE=vegetablejoe;2474679]Sorry, sir, I don't know how to do PM on this forum yet.

Yes the vacuum gauge includes the t-connector and a long length of hose.

Originally Posted by pdspd

First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.

actually madali lang i-DIY iyan. google nyo hitsura ng intake manifold ng makina ng sasakyan nyo. G13 ba iyan?

kung alam nyo po hitsura ng intake manifold e maghanap kayo ng port na pwede isaksak yung hose.

or kung hindi e cutoff one vacuum hose at dun install nyo yung T-fitting.

vacuum hoses ay yung mga maliliit na rubber hose either connecting the carburetor to the intake manifold or distributor advance/retard diaphragm.

kelangan after the carburetor ang installation....

regarding sa mounting ng gauge e double sided tape na lang gamitin nyo.

**OTEP** · January 30th, 2015 11:27 PM

Jemson does it for the Patrol boys. He has a thread here and his FB fan page is: "Jemson's Electrical and Jorge's Radiator Shop".

**OTEP** · January 30th, 2015 11:29 PM

The pod was around Php350 from Jemson

**vegetablejoe** · February 6th, 2015 03:42 PM

Originally Posted by OTEP

Jemson does it for the Patrol boys. He has a thread here and his FB fan page is: "Jemson's Electrical and Jorge's Radiator Shop".

Thanks, Doc Otep. I was able to pass by Jemson's last Tuesday afternoon. Jemson was busy; ang dami nang suki naka double-park... I got to talk to a certain Richard and schedule with him for me to come back Saturday 9am for installation.

I hope they remember...

**OTEP** · February 6th, 2015 03:44 PM

Nakita ko po yata kayo sir. Black jimny? Birthday po kasi ng isa sa mga patrol boys nun. I was in the silver land cruiser po. Richard or jemson can do it sir. Just test the gauge out first in the engine compartment before fixing it in place