Results 1 to 10 of 11
-
Verified Tsikot Member
- Join Date
- May 2012
- Posts
- 137
January 29th, 2015 03:47 PM #1Hi. I would like to have my Veglia Vacuum Gauge installed in my Suzuki Jimny, but I don't who/where to bring it to...
The casa doesn't know what I'm talking about; their part-time installers only do stereo, tint and alarms.
I don't know/have any suki shops on Banaue. So I don't normally go there as ayokong dinudumog ako ng shady characters pagka parada pa lang.
Can anyone recommend a shop or person who I can rely on to do this job correctly?
I already have the gauge but also need a proper bracket/cowling/cover to mount in on the dashboard.
Thanks in advance!
Jaime G.
-
Verified Tsikot Member
- Join Date
- Jun 2011
- Posts
- 134
January 30th, 2015 09:04 AM #2First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.
[SIZE=1]- - - Updated - - -[/SIZE]
First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.
-
Verified Tsikot Member
- Join Date
- May 2012
- Posts
- 137
January 30th, 2015 09:51 AM #3Sorry, sir, I don't know how to do PM on this forum yet.
Yes the vacuum gauge includes the t-connector and a long length of hose.
[quote=pdspd;2474647]First,what is included in the vacuum gauge that you have right now?
You need the ff:
Vacuum hose 2 meters(same as the hose on windshield washers under the hood)
T-connector
If you have it,PM me.
-
January 30th, 2015 10:24 AM #4
[QUOTE=vegetablejoe;2474679]Sorry, sir, I don't know how to do PM on this forum yet.
Yes the vacuum gauge includes the t-connector and a long length of hose.
actually madali lang i-DIY iyan. google nyo hitsura ng intake manifold ng makina ng sasakyan nyo. G13 ba iyan?
kung alam nyo po hitsura ng intake manifold e maghanap kayo ng port na pwede isaksak yung hose.
or kung hindi e cutoff one vacuum hose at dun install nyo yung T-fitting.
vacuum hoses ay yung mga maliliit na rubber hose either connecting the carburetor to the intake manifold or distributor advance/retard diaphragm.
kelangan after the carburetor ang installation....
regarding sa mounting ng gauge e double sided tape na lang gamitin nyo.
-
January 30th, 2015 11:27 PM #5
Jemson does it for the Patrol boys. He has a thread here and his FB fan page is: "Jemson's Electrical and Jorge's Radiator Shop".
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
January 30th, 2015 11:29 PM #6
The pod was around Php350 from Jemson
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Verified Tsikot Member
- Join Date
- May 2012
- Posts
- 137
February 6th, 2015 03:42 PM #7
-
February 6th, 2015 03:44 PM #8
Nakita ko po yata kayo sir. Black jimny? Birthday po kasi ng isa sa mga patrol boys nun. I was in the silver land cruiser po. Richard or jemson can do it sir. Just test the gauge out first in the engine compartment before fixing it in place
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
Verified Tsikot Member
- Join Date
- May 2012
- Posts
- 137
February 6th, 2015 03:47 PM #9Yes sir! Anak ko nag-da-drive... Sayang, I would have wanted to meet you and shake your hand!
-
February 6th, 2015 03:52 PM #10
Haha. Hope to meet you sir. And I hope they can find the gauge pod to hold the gauge po.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
It looks like solid state batteries are the next big thing. Will manufacturers allow retrofits to...
All New Toyota Corolla Cross