Hid Faq

[MRC23]

ang pinaka ewan ko ba tawag dun na kasabay ko e fortuner na naka yellow hid foglights na bukas na 3pm pa lang at malakas ang sikat ng araw!

Baka super dark tint ung windshield nya kaya kala nya gabi na.

[funkngruvn]

DAMI NGA NAKA HID NA PAPANSIN LANG ANG HABOL KAHIT MAAGA PA E NAKAILAW NA.. MERON NGA KO KILALA NAKA HID SYA E PAGDATING NAMAN NG 6PM GARAHE NA KOTSE NYA..

[aLVin]

sayang naman hid nya hehe di nagagamit

[rion]

This one could work. Just use projector lenses. Gawa ito ng Garage Custom Libis:

sirs, anyone has any idea today how much does it cost? how about just a pair in bumper?

at ano po yung pinakamaganda peru mura na Maliit na projector at HID sa Pajero bumpers?

[C24]

saan po sa libis yung garage custom?

thanks!

[Ventoy]

sa HID replacement tama ba na ang dating bulb conector sa Low beam yun na mag supply punta sa Ballast then from Ballast to HID bulbs yun Bulbs naman to the low beam Housing

[papabong]

buti na lang nabasa ko na to bago ako nakapag-pakabit ng HID, ngayon HIDont na lang ako hehehe

[ruelsdcz]

guys...dagdag kaalaman...www.hidbulbsource.com

[baurtwellXUV]

mas maganda pa rin ang mag oem hid fitted cars. they use 4300 kelvin rating. i don't understand why some people buy hid and choose the higher kelvin rating... porma lang ata habol. buy your moneys worth just my 2 cents... go for 6000k or lower... without removing the difuser and syempre right and correct adjustment for the headlight para hindi nakakasilaw...

[emghie]

sir

eto po kaya, pwede lagyan ng hid? h3 & h7 ang socket.

[meledson]

sir

eto po kaya, pwede lagyan ng hid? h3 & h7 ang socket.

Kung tama ang pagkakaintindi ko sa mga pervious posts. Puwede sa Puwede kaso sabog ang magiging bato ng ilaw. nakakasilaw sa kasalubong.

[emghie]

ah. ok. rephrase ko lang po tanung ko, pagnilagyan ko po kaya ng hid, di kaya sabog ilaw nito?

medyo mahirap kasi mag-invest agad tapos di naman maganda ang epekto, sayang lang, wala naman kasi for testing na hid.. paxenxa na po medyo limited lang knowledge ko tungkol sa hid

[[r]ichkri3g]

is it ok to use HID's on OEM foglamp housings?

[IMm29]

sir

eto po kaya, pwede lagyan ng hid? h3 & h7 ang socket.

Pwede yan lagyan ng HID. HID kits nowadays come with bulbs for every size.

Kung tama ang pagkakaintindi ko sa mga pervious posts. Puwede sa Puwede kaso sabog ang magiging bato ng ilaw. nakakasilaw sa kasalubong.

Correct. Di mo lang masusulit yung liwanag ng HID with a stock headlamp assembly as compared to a projector type assembly. Kung gaano kasabog yung halogen mong ilaw, halos ganon din yung HID, pero dahil mas malakas yung buga ng HID, mas halatang sabog at mas nakakasilaw sa kasalubong. So, if you were to install an HID, do a post installation alignment para mabawasan yung silaw sa kasalubong.

ah. ok. rephrase ko lang po tanung ko, pagnilagyan ko po kaya ng hid, di kaya sabog ilaw nito?

medyo mahirap kasi mag-invest agad tapos di naman maganda ang epekto, sayang lang, wala naman kasi for testing na hid.. paxenxa na po medyo limited lang knowledge ko tungkol sa hid

di sing sabog yung buga if your lens is clear (multireflector type), vs yung mga lens na may linya (diffused). may pumapayag naman magtest ng installation. pero baka against the wall lang ang reference or baka di pa masyadong madilim. what brand were you planning to buy?

is it ok to use HID's on OEM foglamp housings?

yes. but same as with headlamp housings, you don't maximize the HID's efficiency. pero it will be brighter than stock halogen, assuming you don't get the HIDs with larger Kelvin ratings.

[emghie]

di sing sabog yung buga if your lens is clear (multireflector type), vs yung mga lens na may linya (diffused). may pumapayag naman magtest ng installation. pero baka against the wall lang ang reference or baka di pa masyadong madilim. what brand were you planning to buy?

any suggestion sa brand na mura na reliable pa... at nang mapag-ipunan..
planning stage pa lang po kasi ko...

[don tan]

sad to say sabog talaga hid when retrofitted to a reflector lamp
initially I thought the excess glare was only a problem with the h4's
Wrong!!! i retrofitted my headlight (H1 kit 4300k) with just the same result
I think the main problem is the lamps specifically designed for halogen bulbs just can not handle excessive amounts of light that HID's emit kaya ayun! glare ang labas.
Although you will surely have better vision at night time there is just too much glare to oncoming traffic and even worse you will get flashed at most of the times so ung lakas ng ilaw mo wala rin kasi silaw ka rin
Lahat ng light cut off ng headlight mawawala or mabublur rin dahil yun nga d talaga intended for HID ang lamp
I'm just finding time to have mine removed as courtesy to all fellow motorists.
As for me though you may find it very tempting and affordable ang HID's (8t as compared to 60t when it first came out in the 90's) just save it and but a good Osram or Phillips brand.

[mazdamazda]

sad to say sabog talaga hid when retrofitted to a reflector lamp
initially I thought the excess glare was only a problem with the h4's
Wrong!!! i retrofitted my headlight (H1 kit 4300k) with just the same result
I think the main problem is the lamps specifically designed for halogen bulbs just can not handle excessive amounts of light that HID's emit kaya ayun! glare ang labas.
Although you will surely have better vision at night time there is just too much glare to oncoming traffic and even worse you will get flashed at most of the times so ung lakas ng ilaw mo wala rin kasi silaw ka rin
Lahat ng light cut off ng headlight mawawala or mabublur rin dahil yun nga d talaga intended for HID ang lamp
I'm just finding time to have mine removed as courtesy to all fellow motorists.
As for me though you may find it very tempting and affordable ang HID's (8t as compared to 60t when it first came out in the 90's) just save it and but a good Osram or Phillips brand.

:2thumbsup:

Hope that we have more motorists like you on the road sir!

[switi]

sir i installed a 4300k HID and yes I must admit malakas ang glare, stray light abounds. Am planning to smoke my headlight glass with only the central core free of smoke, sort of having the sides tinted to avoid stray lights.

[lm723]

Eto naman ung Delica projectors



ganto sya sa loob..



iba pa ung cut-off nya kse right hand drive, so we put in a sheet of metal para pumantay sya.

eto ung final.. 6000K H.I.D. on a delica projector housing, installed on a mazda familia.


medyo maliwanag lang maigi ung pic kse naka 200 or 400 na ISO ako, para nde blurry.

and, nde pa sya pantay. hehehe. need to adjust again.

* but lately, para din nde maging hassle kahit naka projector housing na ako. i removed the HID and installed a 50/60 Watts Hella H3 Bulb. Sayang ung HID, antayin ko muna proper guidelines nang MMDA. And kung may certification man sila or something.



[SIZE="1"]small credits lang po.
delica projector housing, concept of caloyski
[/SIZE]

[GmZ]

Eto naman ung Delica projectors



ganto sya sa loob..



iba pa ung cut-off nya kse right hand drive, so we put in a sheet of metal para pumantay sya.

eto ung final.. 6000K H.I.D. on a delica projector housing, installed on a mazda familia.


medyo maliwanag lang maigi ung pic kse naka 200 or 400 na ISO ako, para nde blurry.

and, nde pa sya pantay. hehehe. need to adjust again.

* but lately, para din nde maging hassle kahit naka projector housing na ako. i removed the HID and installed a 50/60 Watts Hella H3 Bulb. Sayang ung HID, antayin ko muna proper guidelines nang MMDA. And kung may certification man sila or something.



[SIZE=1]small credits lang po.
delica projector housing, concept of caloyski
[/SIZE]

ok ah. pwede rin kaya retrofit ang headlight ng honda crv 06 model. yung hiwalay na ang bright at dim?