Another DIY HID projector headlight. Caution-modem burner

[rmpmla]

ang ganda ng project niyo sir may angel eyes pa

* n5110, thanks

[batang_raon14]

good project. If you need replacement round CCFL you can purchase a piece for just half the price (200) at TipidPC. Look for pcmasterservices or visit http://www.pcmasterservices.tk

Same lang siya ng binebenta ng sa Sulit na taga-Laguna at sa Banawe kukunin, pero kalahati difference sa price. =)

Edit: Add: nice work on the alignment - I'm planning to do that L-type brackets pag ganahan akong ayusin yung niretrofit ko saken. hehe Do you experience the beam getting higher as the beam goes farther away from the vehicle?

[LeOxe]

wow! nice project sir! congrats! :cool:

[rmpmla]

good project. If you need replacement round CCFL you can purchase a piece for just half the price (200) at TipidPC. Look for pcmasterservices or visit http://www.pcmasterservices.tk

Same lang siya ng binebenta ng sa Sulit na taga-Laguna at sa Banawe kukunin, pero kalahati difference sa price. =)

Edit: Add: nice work on the alignment - I'm planning to do that L-type brackets pag ganahan akong ayusin yung niretrofit ko saken. hehe Do you experience the beam getting higher as the beam goes farther away from the vehicle?

Thanks b_r14. i would certainly consider it, especially if its white. I got the blue one for P400 a pair. Mukhang pareho lang price.

At first test, yes tumatataas at yung cutoff ay pumapaling pa kaliwa pag lumalayo sa wall. But this is taken care of by the L-brackets plus the original MPV HL adjustment.

Right now, the beam/cutoff is dead center. yun nga lang kitang-kita mo yung pagbabago ng up/down throw nung beam kahit konting alon lang sa kalsada

[rmpmla]

wow! nice project sir! congrats! :cool:

Thanks LeOxe

[marg]

Hard work paid off!

[xenonoptics]

my purpose for the Hi beam was just for flashing. but this I have removed and used a bull bar mounted fog lamp as my hi beam.

sayang kung makagawa po sana kayo ng pang hi beam grabe lupit na ng nagawa niyo parang OEM hehehe. galing saludo ako

[rmpmla]

Hard work paid off!

* marg Thanks. lots of hours spent before the final result but it's worth it.

[rmpmla]

sayang kung makagawa po sana kayo ng pang hi beam grabe lupit na ng nagawa niyo parang OEM hehehe. galing saludo ako

xenonoptics, Thanks . pag sir nakahanap ako na kakasya na hi beam i will do another retrofit.

[joseph20]

sir, pwede kaya apply ng angel eyes ang sentra B13(LEC body)??