New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 41
  1. Join Date
    Aug 2008
    Posts
    405
    #21
    Quote Originally Posted by mokong22 View Post
    Yan ba yung hino china na p11 engine sir?

    Sent from my vivo 1606 using Tapatalk
    Yes, with p11c engine.

  2. Join Date
    Aug 2008
    Posts
    405
    #22
    Quote Originally Posted by lennon0131 View Post
    Salamat sa mga reply, yung unit na kukunin sana is dump truck.
    10 wheeler dump, as far as i know is ok. Except as mentioned earlier, some electrical problems. Yung mmga mas maliit, can't say...

  3. Join Date
    Jul 2016
    Posts
    1,178
    #23
    Quote Originally Posted by rac98 View Post
    Yes, with p11c engine.
    Balita ko matipid daw yang p11 sir. Yung kinuha namin e13 engine single differential. Medyo malakas sa krudo. Pero lakas humila kaya naka 4th gear sa bundok. 42tons combine mass. May ka kilala ako nag labas ng isuzu china yung hi roof matipid daw sya.

    Sent from my vivo 1606 using Tapatalk

  4. Join Date
    Aug 2008
    Posts
    405
    #24
    Quote Originally Posted by mokong22 View Post
    Balita ko matipid daw yang p11 sir. Yung kinuha namin e13 engine single differential. Medyo malakas sa krudo. Pero lakas humila kaya naka 4th gear sa bundok. 42tons combine mass. May ka kilala ako nag labas ng isuzu china yung hi roof matipid daw sya.

    Sent from my vivo 1606 using Tapatalk
    I am not too sure sa consumption but mas malakas nga humatak yung made in japan (e13 engine). For one thing, e13 has a higher displacement than the p11.

    But compared to fuso 8dc9, 8dc10, 8dc11 and f17e p11 nga pinakamatipid. This is based on a transit mixer truck.

  5. Join Date
    May 2006
    Posts
    4,342
    #25
    the best experienced i had with truck's engine was the isuzu 6WA1. matipid sya at malakas ang hatak. parang naglalaro lamang pag umaakyat ng baguio.
    all along ang akala ko most china trucks' engine ay gawang cummins?

  6. Join Date
    Jul 2016
    Posts
    1,178
    #26
    Quote Originally Posted by Gumusut_Amige View Post
    the best experienced i had with truck's engine was the isuzu 6WA1. matipid sya at malakas ang hatak. parang naglalaro lamang pag umaakyat ng baguio.
    all along ang akala ko most china trucks' engine ay gawang cummins?
    Karamihan sir weichai engine ang mga china trucks. Yung mga howo weichai engine nila pero original design ng steyr germany ata. May cummins din sila gaya ng faw at shacman tracks. Mas mahal lang ng konti mga cummins.

    Sent from my vivo 1606 using Tapatalk

  7. Join Date
    Jul 2010
    Posts
    49
    #27
    [QUOTE=GTi;2950471]My previous post here last 2012 mentioned the QC government issue Foton Tornados with the 4JB1 engine. Its now 2018 and they're still there... Must be pretty good then. I once talked to a barangay personnel who was driving the Tornado a couple of years back. Only had good things to say about it.

    I own a China made JMC Compadre 6 wheeler 14FT aluminum van with Isuzu-Jiangling 2.8L 4JB1 turbo engine, travelling an average 220kms/day with 3 tons of logistics goods overloaded sumasayad na rear tire halos sa body flooring. Until now it's running fine.

    My other logistic truck is a Foton 4W 11FT aluminum van with Cummins 2.8L ISF engine for with-in city deliveries with tight parking space and against truck ban. No problem encountered. Mas tahimik at pino ang tunog ng makina ng cummins 2.8 ISF engine compared sa MUX ko.


    Hindi naman ako nagproblema sa mga pyesa nila. If have a problem on your china trucks spare parts, you my find it at Alibaba. Nan doon alahat na pyesa na kailangan you can also buy the whole engine itself.


  8. Join Date
    Nov 2017
    Posts
    1,748
    #28
    [QUOTE=jaguartiu;2952197]
    Quote Originally Posted by GTi View Post
    My previous post here last 2012 mentioned the QC government issue Foton Tornados with the 4JB1 engine. Its now 2018 and they're still there... Must be pretty good then. I once talked to a barangay personnel who was driving the Tornado a couple of years back. Only had good things to say about it.

    I own a China made JMC Compadre 6 wheeler 14FT aluminum van with Isuzu-Jiangling 2.8L 4JB1 turbo engine, travelling an average 220kms/day with 3 tons of logistics goods overloaded sumasayad na rear tire halos sa body flooring. Until now it's running fine.

    My other logistic truck is a Foton 4W 11FT aluminum van with Cummins 2.8L ISF engine for with-in city deliveries with tight parking space and against truck ban. No problem encountered. Mas tahimik at pino ang tunog ng makina ng cummins 2.8 ISF engine compared sa MUX ko.


    Hindi naman ako nagproblema sa mga pyesa nila. If have a problem on your china trucks spare parts, you my find it at Alibaba. Nan doon alahat na pyesa na kailangan you can also buy the whole engine itself.

    Yung truck nung kapitbahay ko isuzu 4BA1 hanggang ngayon buhay pa makina sira na kaha natakbo pa. Wala din problema sa piyesa meron dun sa auto supply malapit samin yung me ari mahaba baba.. [emoji23]Joke[emoji23]

    Sent from my SM-G955F using Tapatalk

  9. Join Date
    Jul 2016
    Posts
    1,178
    #29
    Helping a friend. Baka may nag hahanap. Newly arrived from china. Faw tractor head double differential. 420hp weichai engine. Unit is in isabela. Pm me na lang. Mas mura sa iba
    [emoji16]

    Sent from my vivo 1606 using Tapatalk

  10. Join Date
    Mar 2014
    Posts
    2,592
    #30
    ^Nung tingin ko sa photo, akala ko mga UD pero hindi pala. 😂

  11. Join Date
    Nov 2018
    Posts
    1
    #31
    I recommend foton. I have 3 year old foton minidump truck (na warranty ang transmission and ang turbo was replaced worth P32k at 3 years). Bawi na and still running with 94k km reading. Have a 2 yr old foton long bed. Napakababilis patakbuhin upto 120kph without load (turbo was replaced under warranty). And not recommended ang Jinbie (17,000 km palang 1year old) medium dump masakit sa bulsa.

    Hope this helps

    Planning to buy forland truck, any body who have use or experience this truck or other brand not mentioned above?
    Thanks

  12. Join Date
    Nov 2010
    Posts
    25,276
    #32
    Quote Originally Posted by beerzero2003 View Post
    I recommend foton. I have 3 year old foton minidump truck (na warranty ang transmission and ang turbo was replaced worth P32k at 3 years). Bawi na and still running with 94k km reading. Have a 2 yr old foton long bed. Napakababilis patakbuhin upto 120kph without load (turbo was replaced under warranty). And not recommended ang Jinbie (17,000 km palang 1year old) medium dump masakit sa bulsa.

    Hope this helps

    Planning to buy forland truck, any body who have use or experience this truck or other brand not mentioned above?
    Thanks
    Kung ganyan kaaga bumigay turbo hindi na lang. Turbo ng jap car ko 21 years na buhay pa. Walang rebuild rebuild. Layo ng quality.

    Kahit mitsu fuso turbo sa delivery mag-17 years na buhay pa din. Wala problema. Yun ang sulit.

    Sent from my SM-G965F using Tapatalk
    Fasten your seatbelt! Or else... Driven To Thrill!

  13. Join Date
    Nov 2017
    Posts
    1,748
    #33
    Isuzu at fuso talaga maasahan mo mga china truck madali masira. Hindi kailangan matulin takbo ng truck delikado yan dami na aksidente dyan lalo lang maging agresibo driver mo.

    Sent from my SM-G955F using Tapatalk

  14. Join Date
    Jul 2016
    Posts
    1,178
    #34
    Quote Originally Posted by maxpedition View Post
    Isuzu at fuso talaga maasahan mo mga china truck madali masira. Hindi kailangan matulin takbo ng truck delikado yan dami na aksidente dyan lalo lang maging agresibo driver mo.

    Sent from my SM-G955F using Tapatalk
    may mga isuzu at hino na gawa china din sir, yung bagong isuzu na hi roof tractor head gawa china yun, balita ko sakit daw sa ulo computer nya.

    Sent from my vivo 1606 using Tapatalk

  15. Join Date
    May 2018
    Posts
    611
    #35
    Newly signed up, one single post, all praises pa on the brand...

    Hmmm... ewan.

  16. Join Date
    Nov 2017
    Posts
    1,748
    #36
    Quote Originally Posted by mokong22 View Post
    may mga isuzu at hino na gawa china din sir, yung bagong isuzu na hi roof tractor head gawa china yun, balita ko sakit daw sa ulo computer nya.

    Sent from my vivo 1606 using Tapatalk
    Basta truck computerized sakit talaga sa ulo lalo na malayo ka sa dealer mo. Mga truck ko ngyn mga dati model pa.

    Sent from my SM-G955F using Tapatalk

  17. Join Date
    Apr 2008
    Posts
    6,235
    #37
    Quote Originally Posted by Ry_Tower View Post
    Kung ganyan kaaga bumigay turbo hindi na lang. Turbo ng jap car ko 21 years na buhay pa. Walang rebuild rebuild. Layo ng quality.

    Kahit mitsu fuso turbo sa delivery mag-17 years na buhay pa din. Wala problema. Yun ang sulit.

    Sent from my SM-G965F using Tapatalk
    21 years old narin ang Granvia. 1KZ engine still has the same turbo at 179k mileage. Seems like it can go on like this forever...

    Agree na hindi kailangang matulin ang trucks. Naalala ko tuloy ang video ng bagong Canter delivery truck na nag road rage, hinabol ang isa pang truck at tumaob.

    Siguro in the next ten years or so pwede na pag isipan ang Chinese trucks as reliable transpo pero sa ngayon, wag muna tayo ang maging guinea pig especially at mabagu bago palang sa kanila ang mga Euro 4 compliant CRDi engines. Its one thing to repair a substandard quality 4JB1 clone which you can get cheap original Isuzu parts for, and another thing entirely to repair a fallen Cummins ISF!

    Sent from my SM-G900I using Tapatalk

  18. Join Date
    Nov 2010
    Posts
    25,276
    #38
    Quote Originally Posted by GTi View Post
    21 years old narin ang Granvia. 1KZ engine still has the same turbo at 179k mileage. Seems like it can go on like this forever...

    Agree na hindi kailangang matulin ang trucks. Naalala ko tuloy ang video ng bagong Canter delivery truck na nag road rage, hinabol ang isa pang truck at tumaob.

    Siguro in the next ten years or so pwede na pag isipan ang Chinese trucks as reliable transpo pero sa ngayon, wag muna tayo ang maging guinea pig especially at mabagu bago palang sa kanila ang mga Euro 4 compliant CRDi engines. Its one thing to repair a substandard quality 4JB1 clone which you can get cheap original Isuzu parts for, and another thing entirely to repair a fallen Cummins ISF!

    Sent from my SM-G900I using Tapatalk

    Yup, lalo na for business purpose. Kelangan surely reliable. Downtime is the worst enemy of sales.

  19. Join Date
    Dec 2006
    Posts
    17,314
    #39
    Quote Originally Posted by Ry_Tower View Post
    Yup, lalo na for business purpose. Kelangan surely reliable. Downtime is the worst enemy of sales.
    Yup. Yung isang Tata namin na truck ilang buwan ang waiting time para sa radiator. 2 months and counting na, nawawalan kami benta.

    Kung yung mga Elf namin yun kahit mekaniko sa tabi tabi kayang remedyohan tapos madali pa humanap ng surplus piyesa.

    Sent from my SM-G950F using Tapatalk

  20. Join Date
    Aug 2012
    Posts
    455
    #40
    Quote Originally Posted by jut703 View Post
    Yup. Yung isang Tata namin na truck ilang buwan ang waiting time para sa radiator. 2 months and counting na, nawawalan kami benta.

    Kung yung mga Elf namin yun kahit mekaniko sa tabi tabi kayang remedyohan tapos madali pa humanap ng surplus piyesa.

    Sent from my SM-G950F using Tapatalk
    diba Tata trucks are like the isuzu sa india? super reliable kahit pambundok?

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

China trucks