STEG vs ROCKFORD

**psych_on** · July 2nd, 2005 06:10 PM

Guys im planning on upgrading (changing) the amp i use for my seps (Focal 165 K2P), im currently using an old model Kicker ZX460 (120 X 2 RMS). What would give me better SOUND QUALITY, and be a better match for the Focal K2 Power, a Rockford - Power T8002 or a STEG - QM 120.2x ? If i upgrade, will there be a noticeable, audible difference in my system (GAGANDA BA TUNOG) even if im just changing brands and not necessarily getting a higher watt amp? By the way, another concern of mine is compatibility with my HU which is a Pioneer 8650 (6.5 volts). If you have other suggestions or reccomendations pls do tell, Thanks!

**baurtwellXUV** · July 3rd, 2005 12:55 PM

ano po specs ng RF na amp?!

**psych_on** · July 3rd, 2005 04:17 PM

ROCKFORD T8002

125 W x 2 * 4 Ohms RMS
250 W x 2 * 2 Ohms RMS
400 W x 2 * 1 Ohms RMS
500 W x 1 * 4 Ohms Bridged RMS
800 W x 1 * 2 Ohms Bridged RMS

STEG

Potenza 4 ohm stereo Watt RMS - 11 to 14,4 Volt 120 x 2
Potenza 2 ohm stereo Watt RMS - 11 to 14,4 Volt 200 x 2
Potenza 4 ohm mono Watt RMS - 11 to 14,4 Volt 400

**27th_Faktory** · July 3rd, 2005 06:27 PM

Rockford for me

**pepengtom** · July 4th, 2005 12:09 PM

rf den for me. ganda ng circuitry ng new model ng rf. lalo na ang power series. parang their back on track na ata.
check the site na lang.
t8002 basta nasa 30k+ na yang ganyan, 42k na kasi ung 4ch version niya.

check mo din ung p5002.