Help in tuning my system

**zanch** · February 27th, 2005 09:24 AM

Guys i have this problem here. My system was tuned by my installer according to my preference. Then yesterday my batt went dead and nareset yung settings.

Di ko ginagalaw yung settings na yun kasi satisfied na ako pati yung amp. Any suggestions how to tune a 7450 and a Fenton 41000 amp? Like if you can give setting examples and how to tweak my amp. SQ na may konti bayo sana. Thanks tsikoteers!

**ssaloon** · February 27th, 2005 01:51 PM

di naman ata mag-iiba settings sa amp mo pag naubusan ka ng batt. HU settings lang ang mabubura. badtrip yan bro, same thing happened to me when i had my timing belt replaced, tinanggal nila yung connection sa battery terminals to be safe. kapain mo nalang ulit, and if it sounds good, save those settings! yan yung ginawa ko :D

**zanch** · February 27th, 2005 01:57 PM

bad trip nga bro sobra!

Kinapa ko lang pero parang may kulang.. haaayy. tagal pa bago ako makadaan kina rocky kasi. Uwi ko muna auto ko Tarlac baka sa march ko pa madadala.

**ILuvDetailing** · February 27th, 2005 05:16 PM

di ba nakaset na yung gain, HPF, LPF settings sa amp?

**notEworthy27** · February 27th, 2005 06:33 PM

When I tune, I usually do it in the evening and in a dark place. Then I close my eyes and "feel" what is missing in my favorite tunes.

**SixPackABZ** · February 27th, 2005 07:13 PM

Bro yung loud settings mo baka di naka set sa high and yung Equalizer setting mo di mo na set sa gusto mo baka naka set yan sa powerful before or super bass. Ang settings ng dalawang yan ang try mo laruin. Yung am naman di nag bagbago ang settings niyan.

**pepengtom** · February 27th, 2005 07:58 PM

mahirap nga yan. nagpapatono din ako, pero pag dating sa iba't ibang music, hindi maganda ang tunog ng seps ko. so, pinapalit palitan ko ung settings.
den, ayun, nawawala ko den.
pero ngayon, mejo kabisado ko na HU ko.