New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 20 of 22

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Apr 2007
    Posts
    5
    #1
    Hi sirs... need your help and expertise on my car audio. Im not even sure if its the setup thats the problem or the HU itself.

    Basically my HU is a pioneer DEH 2950... entry level HU with aux and mp3 in-dash. My main source of music is my creative vision m player which I plug via a 3.5 to 3.5 jack connector to the HU. my jack connector is already gold tipped so its a high end jack.

    Anyway, sound is really good (together with mu subs, amp, and custom EQ in my player) however I noticed that in some songs (or probably most of the songs which I fail to notice since it's too negligible already), some instruments can't be heard. Even in some songs, the voice can't be heard.

    When I half unplug the jack from the head unit, the missing instrument would be heard, however compromising the stereo sound turning it into mono.... but again the missing instrument sound or voice will be heard.

    Just to give you some examples, when the jack is fully plugged to the HU, I won't be able to hear the guitar solo in my sharona, or the harmonica intro in crazy (by aerosmith).... I half unplug the jack, then I will be able to hear the solo and the harmonica (but the rest of the song will sound like mono)

    I hope I was able to explain the problem clearly and hopefully you could suggest solutions to this problem.

    Thanks!

  2. Join Date
    Sep 2005
    Posts
    1,218
    #2
    It seems that you have the wrong kind of plug. Although you may have the right size (3.5mm), you must have the correct number of poles for each plug.

    An ordinary stereo ear/headphone plug has 3 poles ... one each for the left channel, right channel and ground. Some devices need a fourth pole, ex: a control line for the device.

    If your HU needs a 3-pole plug, use a 3-pole plug at that end. Consult your HU manual for the required plug.




    If your MP3 player needs a 4-pole plug, use a 4-pole plug for that end. TIP: The supplied headphones should tell you how many poles it requires.



    HTH

  3. Join Date
    Dec 2007
    Posts
    142
    #3
    Quote Originally Posted by StraightSix View Post
    It seems that you have the wrong kind of plug. Although you may have the right size (3.5mm), you must have the correct number of poles for each plug.

    An ordinary stereo ear/headphone plug has 3 poles ... one each for the left channel, right channel and ground. Some devices need a fourth pole, ex: a control line for the device.

    If your HU needs a 3-pole plug, use a 3-pole plug at that end. Consult your HU manual for the required plug.




    If your MP3 player needs a 4-pole plug, use a 4-pole plug for that end. TIP: The supplied headphones should tell you how many poles it requires.



    HTH
    Whoa! I didn't know this! Very informative. Thanks! I have the very same problem but I'm experiencing it with my PC

  4. Join Date
    Sep 2005
    Posts
    1,218
    #4
    You're welcome siacojin.

    It's the way the contacts inside the socket are laid out ... that when you have a plug and socket mismatch, a line will either be shorted or left unconnected. Hence, the problem happymeal18 is experiencing.

    ---

    I've browsed the Zen Vision M website and indeed, the device uses a 4-pole 35mm connector.

    You may have difficulties finding a 3-to-4 pole plug adaptor and vice versa, and a harder time for a pre-wired cable. So I've drawn up a simple diagram. You can use an existing stereo patch cable (3 poles) or one with a 4-pole plug on each end ... it doesn't matter because you don't need the 4th wire, and you only need to replace one plug.



    The 3-pole plug goes to your Pioneer HU, and the 4-pole plug goes to the Zen Vision M player.

  5. Join Date
    Apr 2007
    Posts
    5
    #5
    Thanks sir, i'll look into this!

  6. Join Date
    Jan 2008
    Posts
    4,725
    #6
    there are many possible causes for your problem...

    here is what you should do to verify...

    try burning a CD MP3 that contains the same music where you experience missing sounds... then check if it will recur to what you have described..

    if it has possible that you have a problem on either left or right channel of your system... try controlling the balance from left to right and check if they have equal sound output...

    if it has not recur possible cause of the problem is the jack you are using.. use another jack and compare... also check your player sound output via earphone and check if the sound you are referring as missing will be heard..

  7. Join Date
    Apr 2007
    Posts
    5
    #7
    thanks for this. Anyway, when i use earphones on my vision m, its just an ordinary 3 pole jack, and the sound is complete. Does this mean the HU really has a bearing on the completeness of the sound?

  8. Join Date
    Sep 2005
    Posts
    1,218
    #8
    In that case, you better check the integrity of the cable with an ohmmeter, testing for continuity from tip to tip, and for any shorts.

    You can also try turning off any sound enhancement feature of the HU and see what happens.

  9. Join Date
    Nov 2007
    Posts
    329
    #9
    i experience this a lot. its usually loose lang. i just got a new cable then ok na. but ang galing nga nyan minsan eh. klarong klaro yung backup vocals.

  10. Join Date
    Dec 2007
    Posts
    727
    #10
    Probably polarity issues. Maaring may cancellation.

  11. Join Date
    Nov 2008
    Posts
    65
    #11
    revive ko lang tong thread na to...i just recently purchased a pioneer 2950 myself, 2nd hand of course. just noticed that the music played through my mp3 player(aux-in), samsung k3, is not as loud as compared to a cd. the player uses the 3-pole jack, i checked...i've yet to notice missing instruments though. is it really like that ba...? music is not as loud played through the aux-in...TIA

  12. Join Date
    Sep 2009
    Posts
    1,136
    #12
    Meron nabibili sa ace na magandang aux cable but the price is around Php500+. Been using it for almost a year and maganda naman yung output tapos wala ako na experience na issue. Yung wire nya mas makapal pa yata sa mga wire ng extension cords. Basta maganda.


    Posted via Tsikot Mobile App

  13. Join Date
    Nov 2013
    Posts
    2,077
    #13
    Quote Originally Posted by Yuki13 View Post
    reviving this thread. stock HU for vios 3rd gen.

    i've been using my Creative Zen Mosaic mp3 player via the Aux port for a while now. bigla na lang di na ma detect nang HU two days ago yung mp3 player.

    I'm sure that my mp3 player and cable are in good condition, it still works in our van's HU. any ideas on what the problem is?
    Casa tested my cable & player in other stock vios 3rd gen HUs, defective nga daw. Pinaiwan saken, papaayos nila sa supplier. Pinahiram ako ng brand new HU, buti me stock sila sa bodega

Tags for this Thread

Help... missing sounds while playing mp3 through aux