CRV SQ Setup

[robot.sonic]

Pahingi naman ng inputs. Mga 50K lang max budget.


Stage 1.
Component : Polk audio db6502 ~ 10K (may polk audio rti a3 kasi ako sa bahay. ok naman yung sound nya para sa akin kaya iniisip ko na polk audio din sa oto)
Head unit: Pioneer DEH-80prs ~ 15K
Deadening ~ 2K
Dash Kit ~ 1.5K
Install ~ 1K

Stage 2.
Amp (wala pang naiisip)
Install ~ 3K

Stage 3.
10 inch sealed sub ~ 8K.

Kung may mga gears dyan na pwede installment pwede na siguro sabay sabay sila lahat.

Yung HU is capable of 3 way active kaya gusto ko din sana gamitin sa future. Malaki ba difference ng 3 way active sa passive?

Ano suggestions nyo?

[monty_GTV]

Pahingi naman ng inputs. Mga 50K lang max budget.


Stage 1.
Component : Polk audio db6502 ~ 10K (may polk audio rti a3 kasi ako sa bahay. ok naman yung sound nya para sa akin kaya iniisip ko na polk audio din sa oto)
Head unit: Pioneer DEH-80prs ~ 15K
Deadening ~ 2K
Dash Kit ~ 1.5K
Install ~ 1K

Stage 2.
Amp (wala pang naiisip)
Install ~ 3K

Stage 3.
10 inch sealed sub ~ 8K.

Kung may mga gears dyan na pwede installment pwede na siguro sabay sabay sila lahat.

Yung HU is capable of 3 way active kaya gusto ko din sana gamitin sa future. Malaki ba difference ng 3 way active sa passive?

Ano suggestions nyo?

parang maliit budget mo sa amp kung 3k, mas mahal pa ang subwoofer mo. kung 3-way active prefer mo dapat 5ch Amp ang kunin mo para tig-iisa kada speakers mo saka 1 para sa subwoofer.

papalitan ko ang DEH-80PRS headunit ng kotse ko this Dec at papalitan ko ng touch screen. if gusto mo ng pre-owned pm ka lang...

[Egan101]

A full active 3-way setup would require 2 4-channel amps or a 6-channel amp plus a mono amp or a single 8-channel amp, and the active crossovers to segregate the frequency cutoff points. Not to mention you will need a 3-way component speaker set (tweeters, mids, and mid-bass).

A 2-way active setup is easier to build as you just need a decent 5-channel amp together with an active crossover. Two channels for the tweeters, two channels for the mids, and the mono channel for the subwoofer.


Sent from my iPhone using Tapatalk

[monty_GTV]

A full active 3-way setup would require 2 4-channel amps or a 6-channel amp plus a mono amp or a single 8-channel amp, and the active crossovers to segregate the frequency cutoff points. Not to mention you will need a 3-way component speaker set (tweeters, mids, and mid-bass).

A 2-way active setup is easier to build as you just need a decent 5-channel amp together with an active crossover. Two channels for the tweeters, two channels for the mids, and the mono channel for the subwoofer.

Sent from my iPhone using Tapatalk

i stand corrected, 6ch saka 1 mono amp na pala kapag 3-way full active.

[robot.sonic]

Ay mali. ~ 10k sa amp. 3k yung estimate ko sa install.

Edit ko post. :D

[robot.sonic]

How about yung separates sir? Ok na kaya yun? Gusto ko din sound signature ng grado headphones. So kung pwede sana na ganon ding sound.

[robot.sonic]

Di ba considered na 3 way active yung highs, mid, at sub?

[sientobente]

Pahingi naman ng inputs. Mga 50K lang max budget.


Stage 1.
Component : Polk audio db6502 ~ 10K (may polk audio rti a3 kasi ako sa bahay. ok naman yung sound nya para sa akin kaya iniisip ko na polk audio din sa oto)
Head unit: Pioneer DEH-80prs ~ 15K
Deadening ~ 2K
Dash Kit ~ 1.5K
Install ~ 1K

Stage 2.
Amp (wala pang naiisip)
Install ~ 3K

Stage 3.
10 inch sealed sub ~ 8K.

Kung may mga gears dyan na pwede installment pwede na siguro sabay sabay sila lahat.

Yung HU is capable of 3 way active kaya gusto ko din sana gamitin sa future. Malaki ba difference ng 3 way active sa passive?

Ano suggestions nyo?

question sir, why did you opt for a 1-DIN unit instead of a 2-DIN unit? Most mid level 2-DIN HUs ng Pioneer should be full-active capable na right? If you spend a bit more, it gets better tuning options that can make it like a mini-processor.

Anyway, the last car I fully setup was also a CRV(Gen 4). Stages I took were:

1st Stage:
Separates(Focal 165FX) and deadening(STP ata forgot, sorry old age na).

2nd Stage:
4-channel Audison SR4
Audison Bit Ten Processor

3rd Stage:
Audison SR1D Mono Amp
Focal 25a4 Subwoofer
Woodworks

4th Stage:
HU Replacement - Pioneer X8850BT

I like the step-by-step upgrade, kasi you get to appreciate each change. Yung last stage lang talaga was for CarPlay/Android Auto. Mine was installed by Simplesound.

[shiro]

Makiki ride na rin ako since i'm planning for a sound setup din on my CRV... i have some old but never installed gears lying around and probably its time to use them. i would need recommendations though

HU: Currently installed Pioneer AVH-275BT
Amp: JBL GTO 1004
Sub: Polk Audio DXI 104 Dual VC 4ohms (2ps)
Wiring Kit: Kicker PK4 4 AWG Wiring Kit

I am missing seps and sub enclosure and don't even know if the subs and amp would even match... or do i need to buy a mono amp to power the subs... or buy a new sub that can be powered by the existing amp...

budget considerations: i'm not planning to spend a lot probably another 10k for seps including install, sub enclosure and hopefully deadening of the front doors

i'm not going towards loud boom boom setup. just something clear and decent. The back of the CRV is often full due to frequent out of town trips so a small sub enclosure is preferred and I don't have to use both subs i can let go of the other one if needed. Thanks

[D3nb3r]

Makiki ride na rin ako since i'm planning for a sound setup din on my CRV... i have some old but never installed gears lying around and probably its time to use them. i would need recommendations though

HU: Currently installed Pioneer AVH-275BT
Amp: JBL GTO 1004
Sub: Polk Audio DXI 104 Dual VC 4ohms (2ps)
Wiring Kit: Kicker PK4 4 AWG Wiring Kit

I am missing seps and sub enclosure and don't even know if the subs and amp would even match... or do i need to buy a mono amp to power the subs... or buy a new sub that can be powered by the existing amp...

budget considerations: i'm not planning to spend a lot probably another 10k for seps including install, sub enclosure and hopefully deadening of the front doors

i'm not going towards loud boom boom setup. just something clear and decent. The back of the CRV is often full due to frequent out of town trips so a small sub enclosure is preferred and I don't have to use both subs i can let go of the other one if needed. Thanks

Since boom-boom is not your thing and looks like space is priority then 2 sub enclosure is out of the equation na. Probably a sealed enclosure?
Your amp is 100x4 rms and kahit bridge pa ang 2 channels kapos parin sa rating ng sub not to mention 4ohm lang and your sub is dual 4ohm so either 2 or 8ohm lang option dyan. Meaning need mo ng dedicated mono amp.
10k for seps, enclosure i think kasya if you get some jbl or infinity seps and ctk deadeners. But if isama ang labor baka mabitin ang 10k na budget mo but I might be wrong about sa cost of labor dahil puro lang ako DIY.

[shiro]

Since boom-boom is not your thing and looks like space is priority then 2 sub enclosure is out of the equation na. Probably a sealed enclosure?
Your amp is 100x4 rms and kahit bridge pa ang 2 channels kapos parin sa rating ng sub not to mention 4ohm lang and your sub is dual 4ohm so either 2 or 8ohm lang option dyan. Meaning need mo ng dedicated mono amp.
10k for seps, enclosure i think kasya if you get some jbl or infinity seps and ctk deadeners. But if isama ang labor baka mabitin ang 10k na budget mo but I might be wrong about sa cost of labor dahil puro lang ako DIY.

Thanks sa feedback sir, i bought these gears several years ago on impulse kasi naka sale hehe... i don't know much about car audio ... visit na lang ako sa installer and check what my options are ... based sa earlier posts some just invested on a good seps saka na subs anyway ill keep my options open lets see

[robot.sonic]

Since boom-boom is not your thing and looks like space is priority then 2 sub enclosure is out of the equation na. Probably a sealed enclosure?
Your amp is 100x4 rms and kahit bridge pa ang 2 channels kapos parin sa rating ng sub not to mention 4ohm lang and your sub is dual 4ohm so either 2 or 8ohm lang option dyan. Meaning need mo ng dedicated mono amp.
10k for seps, enclosure i think kasya if you get some jbl or infinity seps and ctk deadeners. But if isama ang labor baka mabitin ang 10k na budget mo but I might be wrong about sa cost of labor dahil puro lang ako DIY.

5 sheets ng ctk ang nagamit sa front door ko. Inner and outer. 750 per sheet including install. Total = 3750.

Sealed box price (jeff tan) = 2300.

Baka kulangin nga ang 10k sir.

[robot.sonic]

Update sa setup ko:

80prs and focal seps installed.

Deciding pa kung 5 channel amp or 4 channel ang kukunin ko.

May nakita ako na dls a7 selling for 15k. Original price ay 50k. Nakakatakot lang baka fake yung amp.

[robot.sonic]

question sir, why did you opt for a 1-DIN unit instead of a 2-DIN unit? Most mid level 2-DIN HUs ng Pioneer should be full-active capable na right? If you spend a bit more, it gets better tuning options that can make it like a mini-processor.

Budget consideration sir. Plus yung “audiophile” components daw ng 80prs.

[Egan101]

Ask Mickey if you can run full active with that amp without the need of a processor or external crossover. It would be bang for the buck if your amp has those features built-in.


Sent from my iPhone using Tapatalk

[robot.sonic]

Ask Mickey if you can run full active with that amp without the need of a processor or external crossover. It would be bang for the buck if your amp has those features built-in.


Sent from my iPhone using Tapatalk

tinanong ko na sir egan. sana mag reply kaagad. di pa ba enough yung capability ng 80prs HU sir? may mga crossover settings naman sya.


HPF sa tweeter
HPF and LPF sa woofer
LPH sa sub.

[robot.sonic]

Pwede daw pang full active yung amp kasi capable naman yung HU ko.