audio set-up for beginners (ARCHIVED)

[userfriendly]

Sa mga nagpakabit kay Jefftan ng sound setup nila, pano pagkakatono for SQ sa V12? Kinalikot kasi ng kaibigan ko at di ko na makuha ngaun ung dating tono. Oks ung tono ni Jeff eh, mahina nga lang ung bayo.

Anyways, kung sino man makafill-up, TIA!

CH. 1-2 (assuming dito ung sa seps):
XOVER: (HPF, LPF, or ALL?)
TREBLE: (0, 6, or 12db?)
BASS: (0, 6, or 12db?)
GAIN: (from min to max, ilang percent lang dapat?)
LPF: (from min to max, ilang percent lang dapat?)
HPF: (from min to max, ilang percent lang dapat?)

Then, sa Ch.3 and 4 naman, assuming na sa sub un, ano dapat setting?

Eto nga po pala setup ko:
Aura 12" 12000rpm
V12 805 (ata?)
DLS Xover
ABC Box
Targa x652c

Since you have a DLS Xover, I will use it instead of your V12's built in cross over. If possible, turn off your V12's cross ver. If you can't, set it to all.

For the fronts, set your DLS cross over to high pass (HP). This will allow only high frequency sounds to enter your seperates. As to the rest, use your ears. The goal is to get the best possible sound without pushing your equipment to clipping.

For the sub set your cross over to low pass (LP). This way, your sub will only play bass.

BTW, adjust in small increments and be carefull with the gain. Its usually not a good idea to push all the way up.