Results 1 to 10 of 15
Hybrid View
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 23
February 1st, 2013 11:47 AM #1Last week pinapaint ko ang coche ko. Sabi nila 3 to 4 weeks daw bago matapos.
Ano ba ang stages ng repainting at ilang araw kada stage? Gusto ko lang malamang kung bakit ganun katagal.
Salamat!
-
February 1st, 2013 12:06 PM #2
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 23
February 1st, 2013 02:34 PM #3Change color ito. Nagsanding sila hanggang primer. Mga ilang araw lang tapos na.
Ano bang stages ng painting? at ilang araw bawat isang stage.
-
Verified Tsikot Member
- Join Date
- Aug 2012
- Posts
- 31
February 2nd, 2013 12:42 PM #4Mam Yves, ok po yong matagal dahil they adhere to the right procedure ng auto painting....the right procedure po ay tamang pag kaka dry ng paint whatever paint that is. YUn pong madaling magpatuyo ay madali ring kumupas o matanggal ang paint o magbulutong..yung pong may bula o kaya ay mga pinholes kapag natuyo dahl nagkaroon ng trapped moisture. Kung may tanong pa po kayo ay maaari kayong magsadya dito sa amin sa FRankline dent repair sa 31 examiner st. west triangle sa qc.
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 23
February 4th, 2013 12:49 PM #5
-
Tsikoteer
- Join Date
- Aug 2012
- Posts
- 2,767
February 4th, 2013 03:33 PM #6Change color ito. Nagsanding sila hanggang primer. Mga ilang araw lang tapos na.
eto ang mga stages based on the article. how long does each stage last? depend sa condition ng sasakyan mo.
1. Repair Stage
- Rust removal
- Metal works
- Welding
2. Body Straightening Stage
- Block sanding
- Filling
- Block sanding
- Applying guide coat
- Block sanding
3. Painting stage
- Masking
- Wash, Clean, Wipe
- Priming
- Drying
- Base coat
- Drying
- Top coat
- Drying
4. Finishing stage
- Wet sanding
- Polishing
- Buffing
Straightening the panels is likely the most time-consuming part of performing automotive bodywork. While some panels may be straightened with a hammer and dolly, most require filler to be perfect. It takes many hours of spreading body filler, sanding, and repeating the process to ensure a panel's straightness, and, again, some specialty products and tools are required.
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 23
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 23
-
Tsikoteer
- Join Date
- Nov 2009
- Posts
- 1,756
February 14th, 2013 10:03 AM #9
yung local Toyota version na 2.8li diesel ay parang Prado nga lang. same with the Fortuner engine? ...
Land Cruiser 250