Detailing Thread [For Newbies][continued]

[rico_g]

hindi po ba kaya matatangal yung Step 6 nyo of mag step7 w/ NSC kayo? anf step5 din baka tangal din..

gurus ideas po?

Onga! Good point! I overlooked that one!!! Hmm... I just picked every product in my shelf and tried to fit them in... Overlooked compatibility..

Wonder how i'll complete this...

[Nik]

Onga! Good point! I overlooked that one!!! Hmm... I just picked every product in my shelf and tried to fit them in... Overlooked compatibility..

Wonder how i'll complete this...

sir same tayo ng iniisip.. kung anong process yung ok for complete detail..

eto po na iisip ko sa ngayon..

-paint correction-

1.wash
2.clay
3.swirlX (kaya naman siguro nito alisin mga clay residue and QD residue)
4.megs step2(need ko dito yung fine abrasive,hindi yung oils)

-protection-

5.Carlack68 NSC and LLS (tatangalin ni NSC yung oils ni megs step2 so kapit padin si LLS)
6.476s or fleetwax (dipende sa budget) *915 pag special occasion haha

-Looks/-

7. Spray WAX ( nag ii sip pa ko kung ano murang spray wax around 500, "darkening effect") suggest po kayo please...

-maintenance-

8. NAnoSliQ / OGE

**3months sealant-1month collinite-1week spray wax and QD

*guys suggestions/comment nyo po?

[Chikselog]

Some more pics taken kaninang umaga.

Eto cam ko na talaga to haha.

SwirlX + 476S + OGE

[Ginnova]

Some more pics taken kaninang umaga.

Eto cam ko na talaga to haha.

SwirlX + 476S + OGE

Idol, Very nice detail. kintab...

[rico_g]

saw this diagram from autogeek... i have some questions as to which product in my shelf would fit each stage...




I'm going through the moderate imperfections flow:

1. Wash
2. Clay
3. Wash
4. Swirl Remover - Swirl X
5. Finishing Polish - Nano Gloss??? ( i know not a polish, but a filler, or pwede ba to to use as glaze?)
6. Glaze - Moms Step 2???
7 Sealant - Carlack NSC and LLS
8. Wax (after 24 hours) Collinite 476s
9. Spray Wax - OCW
10. QD - Sliq or OGE


very doubtful about Steps 5 and 6... what are good products for these steps??? If ever NanoGloss does not fit any of these steps. when is the best time to apply it (in between which step?)

e2, mas tama to... i think...

1. Wash
2. Clay
3. Wash
4. Swirl Remover - Swirl X
5. Finishing Polish - Step 1 (has some light polish)
6. Glaze - Moms Step 2 or Nano Gloss (??? pa rin ako dito)
7 Sealant - Carlack NSC and LLS
8. Wax (after 24 hours) Collinite 476s
9. Spray Wax - OCW
10. QD - Sliq or OGE

Unclear pa talaga ako sa concept ng glaze.... Pwede na kaya ung step 6 ko?

[rico_g]

Some more pics taken kaninang umaga.

Eto cam ko na talaga to haha.

SwirlX + 476S + OGE

Nice detail idol!!! Super gloss na... 476s pa lang! pano pag nag 915!?

Ung parking nga lang... Construction Ongoing!!!

[PSI]

Master, thanks for the engine wash session.

Before photo (wiping with cloth)



After(degreaser, toothbrush, dressing)



* Matt, Scharnhorst: salamat sa siomiao! kinis ng kotse mo matt!
* Chickselog: salamat sa pagtest sa lower bumper! nawala na mga swirl ng kotse mo!

Mukhang alam ko ginamit dito....not sure pero ....ano ratio neto 1:8? if so eto yung 1:3 na ginagawa ko hehehe!!!

[Chikselog]

*sir Ginnova
Hehe, salamat sir!

*sir Rico
Epic fail talaga mga background ko, panira hahaha. Sa school kasi yan, yan yung ginagawang sports complex.

[PSI]

Nice detail idol!!! Super gloss na... 476s pa lang! pano pag nag 915!?

Ung parking nga lang... Construction Ongoing!!!

NICE!!! good job guys....

*Matt...mukhang ginagabi kyo ah...dapat sumabay na kayo sa aswang session namin hehe!!

OI OI OI!!! ano kinain ninyo? dun na lang tayo sa president....pero the best pigeon sa emerald.....yoko siopao....baka makasuhan ako..(joke joke joke)

[Nik]

e2, mas tama to... i think...

1. Wash
2. Clay
3. Wash
4. Swirl Remover - Swirl X
5. Finishing Polish - Step 1 (has some light polish)
6. Glaze - Moms Step 2 or Nano Gloss (??? pa rin ako dito)
7 Sealant - Carlack NSC and LLS
8. Wax (after 24 hours) Collinite 476s
9. Spray Wax - OCW
10. QD - Sliq or OGE

Unclear pa talaga ako sa concept ng glaze.... Pwede na kaya ung step 6 ko?

nagtanong na po ako nito if glaze then sealant..baka daw hindi kumapit yung LLS.. and if mag NSC naman ..tangal din kung ano man yung nasa ilalim nya like glaze or nanoGloss.. eto po sa pag kakaalam ko lang dahil natanong ko na po dati kala sir ed and mam madkatz.. antay din natin reply nila master and mam madkatz

[Starex_Gold]

Some more pics taken kaninang umaga.

Eto cam ko na talaga to haha.

SwirlX + 476S + OGE

Nang-iinggit?? hahaha

Kintab! Wala ako masabi!

[PSI]

POP QUIZ.....

what's on top of the paint (wag pilosopo syempre top coat)







kala ko uubra sa 476 sa beading....kinapos hehehe!! not bad though....

[Chikselog]

*SG
Ngek hahaha. Taob agad ako kapag nag OGE ka na sa Tucson mo. :naughty2:

Daan ka sa amin text mo muna ko para dalhin ko OGE ko. :naughty2:

Anyway, ang badtrip lang, isang araw pa lang may light hairline swirls agad na nagpaparamdam sa hood.

Grabe weather natin! Yung new plush pa pinamunas ko dun kagabi partida.

[kafph2000]

*madkatz,
Thanks ma'am for the reply. Quick question though. Does moms step 2 stick to paint? Or will it be just stripped off after washing?

[PSI]

Some more pics taken kaninang umaga.

Eto cam ko na talaga to haha.

SwirlX + 476S + OGE

eto yung dati

[Nik]

*SG
Ngek hahaha. Taob agad ako kapag nag OGE ka na sa Tucson mo. :naughty2:

Daan ka sa amin text mo muna ko para dalhin ko OGE ko. :naughty2:

Anyway, ang badtrip lang, isang araw pa lang may light hairline swirls agad na nagpaparamdam sa hood.

Grabe weather natin! Yung new plush pa pinamunas ko dun kagabi partida.

sealant na ang sagot dyan migz hehe time na para bumili hehe

[Chikselog]

Nakakaadik yung PC. Parang yun lang solb na eh. Light cutting pad yata ginamit namin tama po ba idol matt? Not familiar talaga sa mga pads and their respective colors.

*PSI
Haha. Di lang kasi naarawan yung kanina kaya malalim. Mga bandang 6:30 yun ng umaga eh.

*Nik
Sir wala pa budget. If meron lang talaga hehehe. Anyway di ko talaga alam, ang dami kong pinag-iipunan pero di ako makapag-ipon. Palaging gutom sa school e hehe.

[Nik]

if gusto mo mag seal,hanap hanap kana container mo migz hehe nakatambak lang dito LLS.. wala pa kasi ako NSC at swirlX.

[dotnetmatt]

Nakakaadik yung PC. Parang yun lang solb na eh. Light cutting pad yata ginamit namin tama po ba idol matt? Not familiar talaga sa mga pads and their respective colors.

*PSI
Haha. Di lang kasi naarawan yung kanina kaya malalim. Mga bandang 6:30 yun ng umaga eh.

*Nik
Sir wala pa budget. If meron lang talaga hehehe. Anyway di ko talaga alam, ang dami kong pinag-iipunan pero di ako makapag-ipon. Palaging gutom sa school e hehe.

idol migz sa gloss . idol orange cutting pad ginamit natin. Medium cutting pad. And maganda din talaga swirlx, sulit ka idol migz dyan.

*PSI Idol dko pa natitikam yung pigeon dun sa Emerald. Minsan dun tayo malapit sa office sa Shawarma Snack Center. hehehe

[PSI]

idol migz sa gloss . idol orange cutting pad ginamit natin. Medium cutting pad. And maganda din talaga swirlx, sulit ka idol migz dyan.

*PSI Idol dko pa natitikam yung pigeon dun sa Emerald. Minsan dun tayo malapit sa office sa Shawarma Snack Center. hehehe

The best pigeon dun pati fried frog(garlic).....talap talap......kumakain kaya si master neto??
baka magkalimutan.....dec aken yan PC mo ha.....tapos tinginan tayo ng pintura sa feb...tapat ko yung bulok na itim na oto dito