Detailing Thread [For Newbies][continued 3]

[sofiah27]

Mga Sir magandang gabi po, questions lang po.

1. Malaki ba difference ng 12 hrs curing time sa KSG and collinite 915?
Yung mga pix sa taas po kasi 2 coats ng ksg then 1 hr lang pagitan, same with 915.
2. Need ko po ba ng paint correction? Polishing, rubbing?
May nakikita pa kasi akong water marks.
yan po muna.

Thank you po.

[sofiah27]

Thank you so much sir Monty.

[sofiah27]

Yes sir kitoy, naka kaio na din yan ok pala talaga yung kaio sa whole exterior, plastic, lights and glass..
Kasalanan ko din yan, 2 days ko kasi naiwan yung tubig ulan sa kaha. Haist.. Thank you sir Kitoy.

[bloowolf]

Advisable po ba playing pag brand new pa kotse?

[DarkMatter]

Advisable po ba playing pag brand new pa kotse?

Clay mo na sir para sure na walang contaminants sa paint. Then apply your choice of paint protection. Hindi natin alam kung saan naka-stock yung mga units natin habang nasa dealership pa.
Brother-in-law ko naglabas ng unit last two months nung ni-clay namin yung isang panel meron na agad minimal stains sa claybar.

[greatauror28]

Advisable po ba playing pag brand new pa kotse?

Kung masasabi nyo nga sa dealership na wag na nila i-details bago i-release ang kotse, mas maganda..Tipung lahat ng papel at plastick andun pa, para ikaw na lang mag clay for the first time.

This is what I did for my SUV when got I her.

Until now, shining shimmering pa rin sya kahit 1 year-old na

[simpsonseclaire]

mga sir,

ano ba first step to protect and maintain black car paglabas ng casa?

[romeocharlie]

mga sir,

ano ba first step to protect and maintain black car paglabas ng casa?

Paint protection at your suking detailing shop.

[LancerA174A]

Paint protection at your suking detailing shop.

Sir if may swirl marks na ba, pwede pa ba makuha sa detail then apply paint protection afterwards?

[sirkosero]

Sir if may swirl marks na ba, pwede pa ba makuha sa detail then apply paint protection afterwards?

if light swirls kaya ng polishing yan (part of detailing).

kung gasgas na sabit na ang kuko, di na.

[sofiah27]

* Paul Walker
Klasse aio po sa whole exterior ko ginamit 1 coat lang
Klasse SG and 915 2 coats, 1 hr lang pagitan.
*99moves, yes sir 2.0mt racing blue.
Thank you.

[sofiah27]

Guys share ko lang, dati pa to..
Pinnacle clay at mother's step 1 - 3

[StockEngine]

Guys share ko lang, dati pa to..
Pinnacle clay at mother's step 1 - 3

Papa buff mo headlights and foglights? Parang 6yo na hehehe. Nice plates

[RM Hobbyist]

Guys starting pa lang ako sa detailing. Sobrang daming back read hehehehe.

I have a silver 2014 vios. By hand lang ako at eto ang mga gamit ko for now. Microtex Car Shampoo, Formula 1 Premium Paste Wax, NanoSliq and Glass Science Glass Scrub.

Next project would be to have the car clay barred. I'm debating buying my own or just have the detailer do it. From my list any pros and cons and ano pwede ko idagdag para sa complete protection?

Follow up question. Pwede ko ba gamitin yung formula 1 premium paste wax as sealer sa windshield kahit sabi sa details niya na hindi daw pwede? Pwede kasi siya sa headlights eh so i figured baka pwede din sa windshield?

Pasensya na sa mga noobie na tanong Salamat

[Kitoy22]

If the cost of the clay bar kit is acceptable sayo sir, I think mas ok na bumili ka, since long term investment nman to.

[RM Hobbyist]

If the cost of the clay bar kit is acceptable sayo sir, I think mas ok na bumili ka, since long term investment nman to.

Thanks Kitoy22. I think mas may fear ako na baka maging mali ang application ko ng clay bar kaya hindi ko pa siya binibili. Dami ko na pinanood sa youtube pero parang gusto ko pa rin makitang gawin muna ng iba at saka ko gagayahin hehehehe.

[DarkMatter]

Thanks Kitoy22. I think mas may fear ako na baka maging mali ang application ko ng clay bar kaya hindi ko pa siya binibili. Dami ko na pinanood sa youtube pero parang gusto ko pa rin makitang gawin muna ng iba at saka ko gagayahin hehehehe.

Just did my first claying session the past few days sir, nakakapagod din pero sulit ang result. Like you, i was worried at first because i might do more harm than good. So i tried first a small panel (1/2' x 1/2') sprayed qd and clayed the surface. Medyo "maganit" yung pakiramdam habang rubbing ng clay nung una dahil sa contaminants, then sprayed qd again and rub until smooth na yung pasada ng clay sa surface while drying frequently with a waffle weave MF towel. Knead the clay once in a while if there are enough stains absorbed in the clay or knead when proceeding to the next panel. After an hour,finished almost half the car (surprisingly).
The technique was liberal spray of qd on the surface to be clayed.
More lubrication = safer claying.
Claying one panel at a time.
And as sir Stock Engine said: huwag mo ihuhulog haha

[RM Hobbyist]

Nakakalakas ng loob yan DarkMatter Thanks!

Mukhang mapapabili na nga ako hahahaha

[StockEngine]

Ayus yan glass science scrub. Use a wet sponge to utilize it properly. Use it lng if water spots cant be removed with regular wash. Otherwise dont use it. Im using bottled water as washer fluid now so ive stopped using glass science scrub.

You can try sa second row glass yan wax. If you can buff it to clear clarity then wax away your windshield. Buffing windshields will cause glass to collect dust much faster. After buffing use cold distilled water with mf to neutralize the static. Just wet and dry. Avoid buffing. Thats my rain prep.

[RM Hobbyist]

Ayus yan glass science scrub. Use a wet sponge to utilize it properly. Use it lng if water spots cant be removed with regular wash. Otherwise dont use it. Im using bottled water as washer fluid now so ive stopped using glass science scrub.

You can try sa second row glass yan wax. If you can buff it to clear clarity then wax away your windshield. Buffing windshields will cause glass to collect dust much faster. After buffing use cold distilled water with mf to neutralize the static. Just wet and dry. Avoid buffing. Thats my rain prep.

I will try that! Salamat