Detailing Thread [For Newbies][continued 3]

[StockEngine]

Haha actually we can start na. Although limited lang ung mga products ngayon. Will dive into paint coatings pag dumating na ung shipment. Of course guinea pig ung daily driver ko. Hehe

Yeah buff and grime ok din pero liit ng garage nya

did you get the thickness gauge?

Sent from my SM-N960F using Tapatalk

[3GEMS]

Haha actually we can start na. Although limited lang ung mga products ngayon. Will dive into paint coatings pag dumating na ung shipment. Of course guinea pig ung daily driver ko. Hehe

Yeah buff and grime ok din pero liit ng garage nya

Wow. Congrats boss!!! San location shop? Maliit nga garahe though gusto ko process nila.

Sent from my SM-G930F using Tapatalk

[zechs]

Mahal thickness gauge eh. Dont know if i can afford it. Haha

[Flipo]

I used to do my own detailing, I've learned here.
Recently I have my car repainted from a neighbor shop for minor scratches in four different places.

After the paint has dried, as I was told to give the paint a chance to dry, I discovered to my dismay during the car was the feel of top coat paint blown over the car body, near the spot of the repainted area.

I've tried to clay it and polished it with meguiars ultimate polish, but the car body pain still feels rough.

Any suggestions from our resident OC's?

[zechs]

*Flipo,
Orange peel?

[Flipo]

No, top coat spray blown by air

Sent from my ASUS_Z017DA using Tapatalk

[StockEngine]

I used to do my own detailing, I've learned here.
Recently I have my car repainted from a neighbor shop for minor scratches in four different places.

After the paint has dried, as I was told to give the paint a chance to dry, I discovered to my dismay during the car was the feel of top coat paint blown over the car body, near the spot of the repainted area.

I've tried to clay it and polished it with meguiars ultimate polish, but the car body pain still feels rough.

Any suggestions from our resident OC's?

meron thicker areas?

Sent from my SM-N960F using Tapatalk

[Flipo]

Magaspang di nakuha sa claying at polishing, hassle kasi ibalik gusto ko ako na ang gagawa.

Sent from my ASUS_Z017DA using Tapatalk

[StockEngine]

Magaspang di nakuha sa claying at polishing, hassle kasi ibalik gusto ko ako na ang gagawa.

Sent from my ASUS_Z017DA using Tapatalk

by hand i assume?

Sent from my SM-N960F using Tapatalk

[zechs]

Wet sanding then compounding and polishing

If all else fails, then repaint again.

[Flipo]

Naku risky pala, balik ko na lang.

Sent from my ASUS_Z017DA using Tapatalk

[Ginnova]

Magaspang di nakuha sa claying at polishing, hassle kasi ibalik gusto ko ako na ang gagawa.

Sent from my ASUS_Z017DA using Tapatalk

What clay did you use? A more aggressive clay is recommended for overspray

[zainichi]

saan po kayo nagpapacoat ng auto nyo? Near Las Piñas po. help me mga taga south

[zechs]

South Casa?

[zainichi]

South Casa?

san banda yun boss? nakita ko rebirth tsaka shimmer and shield

[montro]

san banda yun boss? nakita ko rebirth tsaka shimmer and shield

Cavite

Sent from my Pocophone using Tapatalk

[Flipo]

What clay did you use? A more aggressive clay is recommended for overspray

Clay pad by hand.

I returned it to the painter, they just buff off all the overspray that I can feel, and okay naman ang naging result.

[sean-archer]

Tsk natutukso ko na bilhin yung speed clay! Haha

Sent from my SM-G935F using Tapatalk

[zainichi]

pahingi naman po review sa mga coater na

south casa - cavite
rebirth - las pinas
shimmer and shield - cavite

[montro]

Check their FB page.

Add to your list Optimum Impression- sta rosa Laguna near enchanted.

pahingi naman po review sa mga coater na

south casa - cavite
rebirth - las pinas
shimmer and shield - cavite

Sent from my Pocophone using Tapatalk