New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 155 of 158 FirstFirst ... 55105145151152153154155156157158 LastLast
Results 1,541 to 1,550 of 1575
  1. Join Date
    Jun 2007
    Posts
    2,840
    #1541
    Quote Originally Posted by indiej View Post
    baka nga makalito, yes, no need to buff. sprayable pa sya. remember Umi's post reference from DW a page ago, 20 nanometers lang ang average thickness na maiiwan na wax layer. 6nm ang bawas kada buffing session nya. at kung todo sagad sa buffing, 6nm din ang naiwan sa testing nya. durability na lang ang usapin sa mga waxes. so don't hesitate to spread it as thinly as you can.

    ok na ok pa rin yan.

    more..
    guys, how have you dealt with the etched watermarks/waterspots on your waxed car?
    with OCW, one spray for most panels. 1.5 sa hood at 2 sa roof. and pag medyo "soaked" na yung MF... pwede na yun na ipang punas sa mga minor areas like pillars, side mirrors, etc.

    liquid gold eh. hehe.

    I've experienced watermarks that ate through at least 3 layers of protection. (sealant+476+booster). A non-abrasive (chemical-based, clearcoat safe) cleaner wax worked. So did claying... But your sealant and wax will come off.

  2. Join Date
    Oct 2008
    Posts
    592
    #1542
    right, all those layers gone to rid of the watermarks. that or run out the parking lot after a drizzle and dry the car before the sun does it for you. It's enough to make people apprehensive of the rain.

    more..

  3. Join Date
    Jan 2011
    Posts
    141
    #1543
    I just tried my hands on "detailing" my car last night and boy was it exhausting! What I did was wash the car, dry, clean the glass with glass scrub and apply rain clear, clean the carpet, apply protectant, apply tire black and apply 476s. Took me over 6 hours to finish all this! kakapagod pala, parang gusto na matanggal kamay ko. Pass midnight na ako natapos, kaya sorry walang pictures.

    Nagkamali pa ako, apply ng 476s sa buong roof tapos pagbuff na ang hirap kasi natuyo na. Ok lang kaya wax on wax off yung 476s, pareho lang kapit? Also, pano matanggal yung mga tumama sa black plastic trims ko? napansin ko kaninang umaga na namuti yung black trims dahil sa wax, lousy tuloy tingnan.

  4. Join Date
    Apr 2008
    Posts
    225
    #1544
    Quote Originally Posted by arjay18 View Post
    I just tried my hands on "detailing" my car last night and boy was it exhausting! What I did was wash the car, dry, clean the glass with glass scrub and apply rain clear, clean the carpet, apply protectant, apply tire black and apply 476s. Took me over 6 hours to finish all this! kakapagod pala, parang gusto na matanggal kamay ko. Pass midnight na ako natapos, kaya sorry walang pictures.

    Nagkamali pa ako, apply ng 476s sa buong roof tapos pagbuff na ang hirap kasi natuyo na. Ok lang kaya wax on wax off yung 476s, pareho lang kapit? Also, pano matanggal yung mga tumama sa black plastic trims ko? napansin ko kaninang umaga na namuti yung black trims dahil sa wax, lousy tuloy tingnan.
    ako paps, gamit ko mothers protectant on the trims...

    bale sinasabay ko yung pag punas ng trims ...after ko mag-linis ng interior...

  5. Join Date
    Jun 2007
    Posts
    2,840
    #1545
    *indiej: nakakainis nga eh. didn't think those watermarks could go through OCW+476+Klasse.

    Quote Originally Posted by arjay18 View Post
    I just tried my hands on "detailing" my car last night and boy was it exhausting! What I did was wash the car, dry, clean the glass with glass scrub and apply rain clear, clean the carpet, apply protectant, apply tire black and apply 476s. Took me over 6 hours to finish all this! kakapagod pala, parang gusto na matanggal kamay ko. Pass midnight na ako natapos, kaya sorry walang pictures.

    Nagkamali pa ako, apply ng 476s sa buong roof tapos pagbuff na ang hirap kasi natuyo na. Ok lang kaya wax on wax off yung 476s, pareho lang kapit? Also, pano matanggal yung mga tumama sa black plastic trims ko? napansin ko kaninang umaga na namuti yung black trims dahil sa wax, lousy tuloy tingnan.
    sir arjay, try mo muna sponge with joy sa trims, if this fails, punasan mo ng degreaser.

    as of now may 2 approaches sa 476:
    1) wax-on, wax-off na panel by panel
    2) leave overnight tapos buff early in the morning

    personally ang ginagamit ko yung #1 kasi ang tigas talaga ng 476

    saya ng detailing no? nakakainis lang talaga pag umulan ulet. haha. pag umulan enjoy mo yung beading
    Last edited by scharnhorst; January 21st, 2011 at 02:25 PM.

  6. Join Date
    Jan 2011
    Posts
    141
    #1546
    Quote Originally Posted by scharnhorst View Post
    *indiej: nakakainis nga eh. didn't think those watermarks could go through OCW+476+Klasse.



    sir arjay, try mo muna sponge with joy sa trims, if this fails, punasan mo ng degreaser.

    as of now may 2 approaches sa 476:
    1) wax-on, wax-off na panel by panel
    2) leave overnight tapos buff early in the morning

    personally ang ginagamit ko yung #1 kasi ang tigas talaga ng 476

    saya ng detailing no? nakakainis lang talaga pag umulan ulet. haha. pag umulan enjoy mo yung beading
    Will try the joy with sponge later sir, sana matanggal.

    I'll stick to #1 din siguro tapos sa roof half half para di tumigas. 5-10 mins lang mahirap na ibuff pano nalng kaya yung overnight?

    Opo sir saya ng detailing. Gusto ko nga po sana umulan para makita ko beading ng rain clear and 476s. Ano kaya kung paliguin ko mamaya yung auto ko?

  7. Join Date
    Aug 2010
    Posts
    79
    #1547
    ay salamat naka-habol din ako sa haba ng thread...

    happy new year po sa lahat!

    share ko experience ko sa OCW, very nice beading & shine... just don't let it dry on the surface, and spread with mf towel until it's dry and shiny... and instead of spraying directly on the surface, spray it on the mf towel and apply evenly... better have an extra dry mf towel to buff it after...

  8. Join Date
    Jun 2007
    Posts
    2,840
    #1548
    Quote Originally Posted by arjay18 View Post
    Will try the joy with sponge later sir, sana matanggal.

    I'll stick to #1 din siguro tapos sa roof half half para di tumigas. 5-10 mins lang mahirap na ibuff pano nalng kaya yung overnight?

    Opo sir saya ng detailing. Gusto ko nga po sana umulan para makita ko beading ng rain clear and 476s. Ano kaya kung paliguin ko mamaya yung auto ko?
    kahit wag mo na basain... ulan ng ulan eh! hehe.

  9. Join Date
    Mar 2005
    Posts
    2,237
    #1549
    Quote Originally Posted by georgeD View Post
    ay salamat naka-habol din ako sa haba ng thread...

    happy new year po sa lahat!

    share ko experience ko sa OCW, very nice beading & shine... just don't let it dry on the surface, and spread with mf towel until it's dry and shiny... and instead of spraying directly on the surface, spray it on the mf towel and apply evenly... better have an extra dry mf towel to buff it after...

    Try niyo gamitin sir yung Microtex Suede na MF towel hindi siya super absorbenta kagaya ng ibang towels kaya madaling ma spread yung OCW at less waste. Yung sobra pwede pang apply sa mga glass and side mirrors.

  10. Join Date
    Apr 2008
    Posts
    225
    #1550
    *jmpet626 thanks for the headsup on microtex sued mf paps....might try it since kakabili ko lang kay ravi the OCW

    what color ba yun, violet?

    gurus of Optimum instance detailer, yung nabili ko kasi kay ravi eh yung nasa spray bottle na nya mismo.. kelangan pa ba ng dillution yun o hindi na?

Detailing Thread [For Newbies][continued 2]