Tsikot.ph PHUV Prototype

[drey]

hello pobreparin!

hello thread!

btw... * pobreparin? are you an OFW because it seems like your user call sounds like one... curious lang po! hehehe... btw, have fun in this thread!

[dprox]

makikisali lang po sa discussion...
regarding the last sketch posted by sir oyil....it seems to be in the same length as the anfra transporter..isn't it? I think it would be more advisable kung kasing length lang sya ng revo, crosswind..or at the most, ung innova.....this will ensure that mas madali syang i-maneuver especially jan sa manila na very crowded ang mga roads...lalo na ung mga hindi major arteries.....then magkaron na lang ng two models...a 3-door model (targeted for transport groups with seat arrangement similar to jeepneys) and 5-door model(multi-market target with seat arrangement similar to most AUV's or better yet, seat arrangement of the 5-door model will have 2 options).....

Is this layout scheme OK with you? This would be the 5-door model, whose dimensions are basically determined by the plywood requirement.
The red line shows 4x8 laying flat on pickup bed, between wheel wells.
Capacity is driver+14 passengers.

[OyiL]

ahhh....would it be ok if posters come up with their proposals for seating configurations?

as mentioned by architect, the tsikot PhUV might be configurable into different variants......so posters. suggestions please. think of possible user applications with seating and cargo configurations. help to the group yan, will be greatly appreciated. Thank you.

[foifoi05]

thanks oyil for inviting me here. Grabe sumakit mata ko reading all the post just to catch up with you guys. Very deep mga usapan, so far ill just share the link of my works(and others) from motioncars.com carchat. These are a little old tinamad nako until meron pala nito, ill try to do some again pag may time:

native concepts(similar to this thread):
http://p083.ezboard.com/fmotioncarsf...cID=3818.topic
*here's a sample from that thread, the "tamaraw FJ" (well assuming co developed with toyota)


concept cars(non-phuv concepts pero i think this can be some of help):
http://p083.ezboard.com/fmotioncarsf...cID=3870.topic
*from the above thread, "fast pickup concept" (fast looking lang)



----- sleepy na, ill try to repost the images here pag sinipag, anyway check the link for now. More power to you guys, gudluck

[OyiL]

source:http://www.skyscrapercity.com/showpo...&postcount=295

From : Sophia Mirasol <sophiamirasol*yahoo.com.ph>
Sent : Tuesday, May 29, 2007 12:43 AM
To : rolando balingit <rombalingit*hotmail.com>
Subject : Re:

| | | Inbox


Thank you Rolando!

I will count your suggestion in our discussion for a name.

Your support and positive response will help in achieving our goals. We hope to see you and your friends at [SIZE=5]Market market on June 12-13[/SIZE]. We will introduce the pinoy vehicle there!!

Pia
rolando balingit <rombalingit*hotmail.com> wrote:
Hi,
I was the one who created the phuv car thread in skyscrapercity forum site.
I wish you the success im looking forward to see what the Filipino could offer
in car manufacturing.count on me,this could be my first brand new car,
I prefer the name pagasa,the name of one of our philippine eagles

Good luck,

[dprox]

There are two categories of ART. On one hand, "Fine" art is for the pure expression by an artist and aesthetic reaction by the beholder. On the other, "Practical" art is for some intended use by consumer or user. These threads are eminently geared towards practical art, but do not exclude the fine art of car rendering for art's sake.

foifoi05's first post in http://tsikot.yehey.com/forums/showp...5&postcount=51 appears to be a visual concept (fine) for an SUV (practical), that is perfectly adaptable - with some dimensional adjustments - to the OTJ or PhUV.
What's important is that foifoi05 is able to contribute new "visual words" (shapes, forms, configs) - a visual vocabulary that can be used to "describe" (design, style) an original vehicle.

* foifoi05:
Welcome to the Tsikot Auto Design and Research Forum! It's great to have you around. Suggestion lang: Try to read through the forum threads to understand what this new forum is about. It's basically an advocacy forum for OPVs (Original Pilipino Vehicles), and this particular thread is for the PhUV. Once you get the feel of it, you can start your own thread(s), even just for auto art's sake. This forum is also for people who need a repository/art museum for their artistic urges - basta about cars and Pinoy.
If you have friends from art circles with similar interests, please invite them, too!

[dprox]

OT Announcement:
[SIZE="4"]Discovery Channel's FUTURE CAR[/SIZE],
a four-part series showing how seven interns design a future car.
8pm starting Thursday June 7.
http://www.discoverychannelasia.com/...ar/index.shtml
Don't miss it!:lolabove:

[pobreparin]

OT:
*drey...
are you referring to my handle(user name) when you said user call?sorry..if its not what you meant but if it is....well....literal yung user name ko eh...ala pa kasi pera even after working for so long na....hehehe...
I think I am not considered as an OFW since my company is still based in the Philippines(IT related). I'm just being assigned in Japan if there are projects....

*dprox
yup...that's how I think a five-door model seat layout should be.
another possible option is to have the second row and the rear seats collapsible...
second row seat: can be folded down(ung sandalan lang) in case of long cargos...
rear seat...similar to fx and revo wherein it can be folded up to accomodate big cargos..
3-door models can also have the arrangement of the rear seats in your layout but it will extend up to the rear of the 1st row seats...similar to tamaraw, fiera style...but still, seats can be folded in case of big cargos(i.e. plywood, boxes,etc..
sorry if I can't provide some pc layouts...di kasi pwedeng mag-install ng ibang software dito sa pc ko eh...(company property kasi...)

suggestion:
maybe we also need to further breakdown working/design groups...
let's say...we can create a separate thread for the interior design and leave this thread for exterior design..para mas maging organized ang ideas...
just a suggestion....

[foifoi05]

There are two categories of ART. On one hand, "Fine" art is for the pure expression by an artist and aesthetic reaction by the beholder. On the other, "Practical" art is for some intended use by consumer or user. These threads are eminently geared towards practical art, but do not exclude the fine art of car rendering for art's sake.

foifoi05's first post in http://tsikot.yehey.com/forums/showp...5&postcount=51 appears to be a visual concept (fine) for an SUV (practical), that is perfectly adaptable - with some dimensional adjustments - to the OTJ or PhUV.
What's important is that foifoi05 is able to contribute new "visual words" (shapes, forms, configs) - a visual vocabulary that can be used to "describe" (design, style) an original vehicle.

* foifoi05:
Welcome to the Tsikot Auto Design and Research Forum! It's great to have you around. Suggestion lang: Try to read through the forum threads to understand what this new forum is about. It's basically an advocacy forum for OPVs (Original Pilipino Vehicles), and this particular thread is for the PhUV. Once you get the feel of it, you can start your own thread(s), even just for auto art's sake. This forum is also for people who need a repository/art museum for their artistic urges - basta about cars and Pinoy.
If you have friends from art circles with similar interests, please invite them, too!

thanks a lot sir. Almost done scanning this thread. Glad to see this kind of forum, matagal ko na hinahanap ito. Ive started a topic on motioncars similar to this pero hindi umabot sa ganitong level. thanks to sir Oyil for the invite. I dont do tech and mech car stuff, kaya mejo on the form/aesthetic level ang contribution ko for now.

Apologies to my previous posts. Been very busy lately, but if i got the free time, ill produce some suggestions specifically for the phuv. Perhaps i suggest for a concept art thread for new and established makes (since i dont have the privilege to start a thread here). Anyway, Its nice to hear you guys are up for it i wish you all the luck.

[straker]

My first post in this thread.

Oyil, can you consider having the spare wheel "encased" within the rear door assembly? Assuming we're using regular-jeep sized wheels, such wheels are HEAVY. Walang isyu kung mga maton tayo, pero paano kung nag-iisang girl?

I was thinking of a retractable frame within this assy which allow unloading and loading the spare. If we can afford it, may power assist pa! .

BTW, are we "decided" that the engine is up-front, or in the driver's cabin?