Results 1,111 to 1,120 of 2358
-
October 9th, 2014 09:06 AM #1111
im planning OEM 5 rear glass and back passenger windows, then OEM 20 sa WS and front passenger windows. oks kaya ito?para hindi masyado madilim yung front and may continuous effect yung sa back side ng yaris
-
-
October 9th, 2014 09:25 AM #1113
That's almost the same as mine except I have K28 on the WS. I find the OEM20 borderline na, but of course it depends on the light sensitivity of your eyes.
Why not go K28 for front sides and WS then K14 for the rest?
Mas maganda heat rejection unless you want it to be as dark as possible sa rear seats. This combination have better heat rejection.
-
October 9th, 2014 09:57 AM #1114
Hi shox. thanks for the advise. but K series would be close to magic tint na right? hindi ko kasi masyado gusto yung magic tint e.
-
Tsikoteer
- Join Date
- Aug 2012
- Posts
- 2,767
October 9th, 2014 10:45 AM #1115VK, X and K series have metals in them so they will be reflective. only the OEM series is dye-based.
Solitaire VK series
Rare Metals, Multi-Layered Sputter Coating (Silver, Indium Oxide and other rare metals): 7-9 layers
Stature X series
Rare Metals, Multi-Layered Sputter Coating (Silver, Indium Oxide and other rare metals): 1-5 layers
Signature K series
High Performance Metals: Up to 2 layers
OEM Series
Dyed film technology
-
October 9th, 2014 11:14 AM #1116
-
October 9th, 2014 11:20 AM #1117
It's actually very different from the typical magic tint shade surprisingly.
My other car has magic tint all around and from the inside, the color is the same (brownish) pero from outside malayo ang V Kool color.
Here is a zoom out picture and as you can see, the shade of the WS (K28) is very similar to the black color of the car and the side windows which are OEM series.
You can decide when you are at the shop naman to compare the color subtleties.
They can even put a sample on your window side by side so you can compare the difference.
-
October 9th, 2014 11:26 AM #1118
thanks boss. ill ask tint hub for comparison. may auto ata dun naka oem 5 and 35 daw.sana may V series din.
-
October 9th, 2014 11:49 AM #1119
Glad to have helped.
If you have the budget for VK40 on the WS, go for it. It has the highest heat rejection, 2nd highest TSER of all V Kool tint types and provides enough shading but doesn't sacrifice night time visibility.
For me, this is the sweet spot in terms of VLT and heat rejection for the WS.
Yung sides, pili ka na lang from OEM series; OEM20 front sides and OEM5 the rest or K series; K28 sides and K14 the rest.
K series combo mas maliwanag from inside but heat rejection is a little better than the OEM series combo.
-
October 9th, 2014 05:11 PM #1120
Thanks for the advise.
Nagpakabit nako..what i did is oem5 all side windows. Then oem 20 front windshield and rear glass.oks naman.maliwanag. nirecommend nila oem20 sa likod para hindi daw ako mahirapan sa pag reverse if ever sa gabi. Hindi naman nako kita sa front and back from the outside.
It's looking a lot like a certain cruiser with that color scheme.
VinFast VF 3