Anyone here have 'V Kool' tint?

[Walter]

btw, may nakausap ako from Vkool that can give further discount pa doon sa promo nila.

Share please.

[MonteroGLSV]

sir walter, you're from V-Kool main branch?

V-Kool car club tie up offers , contact marketing department 3532191 / 09228098779 (Dianne Cochico).

[Walter]

I'm not. Just saw this on V-Kool facebook page. Thought we could have a group buy for tsikot members.

[X-salta]

I had my shot of V-KOOL at TINTHUB West Ave. last Friday. I was surprised how fast the installation of the tint would be, contrary to what V-KOOL main office of told me that I would take 5-6 hours (max).

I arrived at about past 10am where I was entertained by Anne. Instantly their sliding door has the entire V-KOOL tint variants that you want to see. Sad to say that at that time my choice of V-KOOL was not available (K37 series was out of stock), maybe it’s because I didn’t even gave them a call that I’m coming, heheh! Until Pinky (Tin Hub Ortigas) called me up and told me if I want to choose the K28 series instead.

Anyways, I also liked the shade of the K28 series and since I’m there already I gave them a GO signal to install it. Scraping-out the old tint was a breeze, since the existing tint was old. Hours had passed when Ma’am Jane (Sir Russell’s wife) approached me and ask me if the boys were doing fine, I said “yes they are doing great”. She took a look at the car and the process of installation. It was past 12 noon when the installation finished (after +/- 2.5 hours).

My Observations are as follows:
- More Light Inside
- Medyo Hazy sa loob (siguro nga dahil bagong install)
- Madami little bubbles, normal daw ito and the bubbles will soon be all gone after curing time

Special thanks to all the staff! Lalo na kay Anne and Ma’am Jane (I hope I got your name right).

More Power to Tint Hub!

To my fellow TSIKOTEERS, I will update you.

[numbah5]

I had my shot of V-KOOL at TINTHUB West Ave. last Friday. I was surprised how fast the installation of the tint would be, contrary to what V-KOOL main office of told me that I would take 5-6 hours (max).

I arrived at about past 10am where I was entertained by Anne. Instantly their sliding door has the entire V-KOOL tint variants that you want to see. Sad to say that at that time my choice of V-KOOL was not available (K37 series was out of stock), maybe it’s because I didn’t even gave them a call that I’m coming, heheh! Until Pinky (Tin Hub Ortigas) called me up and told me if I want to choose the K28 series instead.

Anyways, I also liked the shade of the K28 series and since I’m there already I gave them a GO signal to install it. Scraping-out the old tint was a breeze, since the existing tint was old. Hours had passed when Ma’am Jane (Sir Russell’s wife) approached me and ask me if the boys were doing fine, I said “yes they are doing great”. She took a look at the car and the process of installation. It was past 12 noon when the installation finished (after +/- 2.5 hours).

My Observations are as follows:
-More Light Inside
-Medyo Hazy sa loob (siguro nga dahil bagong install)
-Madami little bubbles, normal daw ito and the bubbles will soon be all gone after curing time

Special thanks to all the staff! Lalo na kay Anne and Ma’am Jane (I hope I got your name right).

More Power to Tint Hub!

To my fellow TSIKOTEERS, I will update you.

Sir those little bubbles will disappear din. Our BRZ had those also for about a day or 2 tapos nawala na lang

Sent from my GT-N7100 using Tapatalk

[IMm29]

Bilad as much as possible para curing is quicker.

Posted using TocinoTalk

[X-salta]

I went back to tint hub in west ave. where I was entertained by russel, I just want to report a triangular bubble in the edge of my front windsheild, sabi kasi dun sa manual that it should be reported immediately after servicing.

He dad a look-see of the installation and saw the problem. we just waited for one of the boys to attend to the problem. After it was done I proceed to work but after some time that small triangular bubble edge kept on popping-out again and again.

So I called Russel again and told me to bring the car again tommorow so that it can be treated with a heat gun "baka di lang naluto maigi" I hope na makapunta ako tommorow, hirap kasi tumakas sa opis.

Update ko ulet kayo mga fellow tsikoteers!

Sent from my MediaPad 7 Lite using Tapatalk

[X-salta]

I find it very inconvenient na pabalik-balik sa pagawaan, sana maayos na.


Sent from my MediaPad 7 Lite using Tapatalk

[ero124]

Share lng mga ka-tsikot. Had my v-kool tint installed three weeks ago, nawala naman ung mga bubbles after 2 weeks, may napapansin lang ako na parang hairlines sa ws, visible cia especially at nyt kapag naiilawan. Normal ba to? Kelangan ko b ibalik sa naginstall for backjob, tinthub ortigas po ako. Tnx

[crazy_boy]

Baka na-scratch yung windshield. Ano yung tools na gamit ng vkool? Metal or plastic?

Sent from my GT-I9300 using Tapatalk 2

[numbah5]

Share lng mga ka-tsikot. Had my v-kool tint installed three weeks ago, nawala naman ung mga bubbles after 2 weeks, may napapansin lang ako na parang hairlines sa ws, visible cia especially at nyt kapag naiilawan. Normal ba to? Kelangan ko b ibalik sa naginstall for backjob, tinthub ortigas po ako. Tnx

Sir did you try to wipe them off? I had noticed those agad pero nung sinubukan kong punasan, natanggal naman.

[jyri]

Mga sirs, I have recently acquired a vehicle wherein vkool ung tint na nakainstall. As per SA 3 days daw bago ko pa pwede magamit ung windows ko (up or down action). Confirm ko lang po sana if safe na nga gamitin windows after that period?

Sa inyo po ba ilan days hinintay nyo bago nyo ginamit ung windows?

By the way OEM lang po na vkool ung nakainstall sa window ko. Thanks in advance.

[Manilablock]

Share lng mga ka-tsikot. Had my v-kool tint installed three weeks ago, nawala naman ung mga bubbles after 2 weeks, may napapansin lang ako na parang hairlines sa ws, visible cia especially at nyt kapag naiilawan. Normal ba to? Kelangan ko b ibalik sa naginstall for backjob, tinthub ortigas po ako. Tnx

Malamang galing yan sa cutter, mabigat ung kamay nung nag install

Sent from my GT-N5110 using Tsikot Car Forums mobile app

[X-salta]

Mga sirs, I have recently acquired a vehicle wherein vkool ung tint na nakainstall. As per SA 3 days daw bago ko pa pwede magamit ung windows ko (up or down action). Confirm ko lang po sana if safe na nga gamitin windows after that period?

Sa inyo po ba ilan days hinintay nyo bago nyo ginamit ung windows?

By the way OEM lang po na vkool ung nakainstall sa window ko. Thanks in advance.

Yung sa akin pede na raw gamitin power windows after 3 days. Pero ayoko pa rin gamitin ang power windows ko hanggang di nawawala bubbles. Hintay ko nlang mag 1month to make it sure, . Hirap magpa balik-balik sa shop.

[ero124]

2 kasi ung nag-install sakin ung isa plastic ung gamit nya, ung isa nman metal. Di ko na marecall kung anu ginamit na scraper sa ws ko. Sa gabi lng naman cia pansin and tolerable nman. Gusto ko sana ipakita sa tinthub ortigas kaya lng close na sila by then na visible ung scratches. Panu kaya un. Any idea. Tnx

[ero124]

Ni-wipe ko cia dati pero lite wipe lng ginawa ko and andun pa din ung mga lines. Anu ba sir pinang-wipe mu? Damp cloth lng ba?

[ero124]

Sir did you try to wipe them off? I had noticed those agad pero nung sinubukan kong punasan, natanggal naman.

Pinunasan ko dati pero lite lng ang andun pa din ung lines, anu ba ipinunas nio sir?

[crazy_boy]

Pag nasilawan ng araw check mo if kita ba. If yes, most likely scratch yan.

Sent from my GT-I9300 using Tapatalk 2

[MonteroGLSV]

got V-Kool also at main office yesterday pero hindi ako nagdala dun dahil out of the country ako, sabi ng pinsan ko okey naman daw ung pakakababit problema nga lang may kunting scratch sa dashboard anak ng .... meron maliit lang nmn


Cutter

Emblem
http://i1363.photobucket.com/albums/...g?t=1383207623

[MonteroGLSV]

got my ride tinted by VKool main office yesterday, overall okey nmn cya except sa small cut on my dashboard huhu.


Emblem

Dashboard scratch