Results 1 to 5 of 5
-
Verified Tsikot Member
- Join Date
- Nov 2002
- Posts
- 25
-
July 31st, 2003 11:54 AM #2
if you are referring to the bushing at the base of the shift-stick, normally dalawa lang ang bushing dun, they are plastic bushings.
Paki correct na lang po kung mali.
-
July 31st, 2003 04:22 PM #3Originally posted by artpogi
if you are referring to the bushing at the base of the shift-stick, normally dalawa lang ang bushing dun, they are plastic bushings.
Paki correct na lang po kung mali.
correct.
-
August 1st, 2003 12:22 AM #4Originally posted by artpogi
if you are referring to the bushing at the base of the shift-stick, normally dalawa lang ang bushing dun, they are plastic bushings.
Paki correct na lang po kung mali.
hard plastic ang OEM, polyurethane sakin nung nag palit ako ng short-shifter. shifter bushing nga ba talaga ang pinaguusapan natin?! hehehe.
this bushing?well, WRX bushing, hehe.
-
August 1st, 2003 12:26 AM #5
by the way, dalawa ang bushings or two-piece ang bushing?
Two-piece bushing but actually considered as ONE having it installed on the same location with the lever in between them.
mazda protege bushing
For the Toyota products its likely to be the case for most of their products per the service...
Wheel Alignment