New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Results 1 to 16 of 16

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Join Date
    Jun 2007
    Posts
    46
    #1
    may alam ba kayo shop na nag aadjust or nagbabago ng shifting time ng mga a/t?

    say gusto ko mag shift cya ng 2nd gear round 20-30, 3rd gear round 40-50,4 gear round 80-90?

    kase nag loloko a/t ko nag shift cya ng 2nd gear 10, 3rd gear 30, 4th gear 60
    dati hindi naman cya ganun pls help

  2. Join Date
    Nov 2003
    Posts
    3,848
    #2
    ibaon mo ng konti para mas late sya magshift. aside from that nobody can reprogram the shifting pattern of the auto tranny.

  3. Join Date
    Jan 2006
    Posts
    2,105
    #3
    check mo muna kung normal yung atf level. I notice kasi, if underfilled, early yung shifting. if overfilled, late yung shifting.

    kung okay lang ang atf levels and if the ride still has the good old kickdown cable (tranny cable) tighten it a bit. or play around the settings. and make sure you put markings on the stock settings. so puwede mo siya ibalik sa original settings anytime.
    Last edited by rion; May 4th, 2008 at 05:33 PM.

  4. Join Date
    Jun 2007
    Posts
    46
    #4
    Quote Originally Posted by rion View Post
    check mo muna kung normal yung atf level. I notice kasi, if underfilled, early yung shifting. if overfilled, late yung shifting.

    kung okay lang ang atf levels and if the ride still has the good old kickdown cable (tranny cable) tighten it a bit. or play around the settings. and make sure you put markings on the stock settings. so puwede mo siya ibalik sa original settings anytime.
    san located yung kick down cable?

    regarding sa gas pedal,dati kase ok yung shifting nya round 2000k-2300rpm nag shift na cya agad. shift to 2nd gear round 20-30 3rd gear 40-50 4th gear 80-90

    ngayon shift cya 2nd gear 10 3rd gear 30 4th gear 60 ayaw na tuloy umakyat ng 100

    meron ba ako kailangan palitan na part para medyo gumanda takbo?

  5. Join Date
    Jan 2006
    Posts
    2,105
    #5
    not all rides use the old kickdown cable. see if there is a cable next to the throttle cable. it is usually wrapped in orange rubber. a small movement of the nut already makes a noticable difference. again, put markings on your original settings so you can return it to original anytime.

    ayaw na tuloy umakyat ng 100.
    are you sure, you can't reach 100 at all? a loosy kickdown cable may take a little longer to reach 100 but it could still go pass it.

    meron ba ako kailangan palitan na part para medyo gumanda takbo?
    at this point, let's solve the a/t problem first.

  6. Join Date
    Jun 2007
    Posts
    46
    #6
    Quote Originally Posted by rion View Post
    not all rides use the old kickdown cable. see if there is a cable next to the throttle cable. it is usually wrapped in orange rubber. a small movement of the nut already makes a noticable difference. again, put markings on your original settings so you can return it to original anytime.



    are you sure, you can't reach 100 at all? a loosy kickdown cable may take a little longer to reach 100 but it could still go pass it.



    at this point, let's solve the a/t problem first.
    yup ayaw na umabot ng 100! dati d naman cya ganun consistent around 2000-2300rpm umaabot pa cya ng 120 ngayon ayaw na super hirap na agad makina

    may problem ba sa torque converter, speed sensor ecu or spedometer?

a/t question